TOTAL TG1101256E Angle Grinder User Manual

1. Introducció

Thank you for choosing the TOTAL TG1101256E Angle Grinder. This manual provides essential information for the safe operation, maintenance, and care of your tool. Please read it thoroughly before first use and keep it for future reference. This 950W angle grinder with a 125mm disc is designed for efficient cutting, grinding, and polishing across various materials, suitable for both domestic and professional applications.

2. Instruccions generals de seguretat

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.

• Seguretat elèctrica: Ensure the power cord is undamaged and suitable for outdoor use if applicable. Avoid body contact with earthed or grounded surfaces.
• Seguretat personal: Stay alert, watch what you are doing, and use common sense. Do not operate the tool while tired or under the influence of drugs, alcohol, or medication.
• Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica adequada per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.
• Retrocés i advertències relacionades: Kickback is a sudden reaction to a pinched or snagged rotating wheel. Always maintain a firm grip on the tool and position your body and arm to allow you to resist kickback forces.

3. Contingut del paquet

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, contact your supplier immediately.

• TOTAL TG1101256E Angle Grinder
• Mànec auxiliar
• Guàrdia de les rodes
• Clau clau

Image: The TOTAL TG1101256E Angle Grinder shown with its auxiliary handle, wheel guard, and spanner wrench.

4. Configuració

Before connecting the tool to the power supply, ensure all components are correctly assembled.

4.1 Fixació de la nansa auxiliar

The auxiliary handle can be screwed into one of the three threaded holes on the gear housing, depending on the application and user preference. Ensure it is tightened securely before operation.

4.2 Attaching and Adjusting the Wheel Guard

The wheel guard must always be used to protect against sparks and debris. Loosen the guard's clamping screw, position the guard to cover the disc as much as possible, and then tighten the screw firmly. The guard can be rotated for optimal protection during different operations.

Image: The adjustable wheel guard on the angle grinder, showing its range of motion for user protection.

4.3 Muntatge del disc de mòlta/tall

1. Assegureu-vos que l'eina estigui desendollada.
2. Premeu el botó de bloqueig del fus per evitar que el fus giri.
3. Col·loqueu la brida interior al cargol.
4. Position the grinding or cutting disc onto the inner flange, ensuring it sits correctly.
5. Screw the outer flange (locking nut) onto the spindle.
6. Use the spanner wrench to firmly tighten the outer flange while holding the spindle lock button.
7. Allibereu el bloqueig del cargol.

Always use discs appropriate for the tool's diameter (125mm) and maximum RPM (11,000 r/min).

5. Instruccions de funcionament

Before starting, ensure the work piece is securely clamped. Always wear appropriate PPE.

5.1 Engegada/apagada

• Encendre: Slide the ON/OFF switch forward. For continuous operation, push the switch further forward until it locks.
• Apagar: For continuous operation, press the rear part of the ON/OFF switch. For momentary operation, simply release the switch.

5.2 Tècniques de mòlta i tall

Allow the disc to reach full speed before making contact with the workpiece. Apply moderate pressure; excessive force can reduce efficiency and damage the disc or tool.

• Mòlta: Hold the tool at an angle of approximately 15-30 degrees to the workpiece. Move the tool smoothly across the surface.
• Tall: Hold the tool perpendicular to the workpiece (90 degrees). Make straight, steady cuts. Do not apply side pressure to the cutting disc, as this can cause it to shatter.

Image: Demonstrating cutting metal with the angle grinder, highlighting proper technique and spark generation.

Image: The angle grinder being used to grind a metal pipe, showing the tool's application for surface finishing.

Image: The angle grinder in use on a concrete block, demonstrating its versatility for different materials.

6. Manteniment

Regular maintenance ensures the longevity and safe operation of your angle grinder. Always unplug the tool before performing any maintenance.

6.1 Neteja

Keep the ventilation openings clean to prevent motor overheating. Use a soft brush or compressed air to remove dust and debris from the tool's housing. Do not use water or chemical cleaners.

6.2 Substitució del disc

Replace worn or damaged discs immediately. Follow the disc mounting instructions in Section 4.3. Always use discs that are compatible with the tool's specifications.

6.3 Inspecció de raspalls de carbó

The carbon brushes may need periodic inspection and replacement. If the motor sparks excessively or the tool loses power, the carbon brushes might be worn. This procedure should ideally be performed by a qualified service technician.

7. Solució De Problemes

If you encounter issues with your angle grinder, refer to the following common problems and solutions.

• L'eina no s'inicia:
  • Check if the power cord is properly plugged into a functional outlet.
  • Inspeccioneu el cable d'alimentació per si hi ha danys.
  • Assegureu-vos que l'interruptor ON/OFF estigui completament activat.
  • Check the carbon brushes for wear (refer to Section 6.3).
• Vibració excessiva:
  • Ensure the grinding/cutting disc is correctly mounted and tightened.
  • Comproveu si el disc està danyat o desequilibrat; substituïu-lo si cal.
• Potència reduïda o guspires excessives:
  • The carbon brushes may be worn and require replacement.
  • Ensure the ventilation openings are clear.

If the problem persists after attempting these solutions, contact customer support or a qualified service center.

8. Especificacions

Technical data for the TOTAL TG1101256E Angle Grinder.

Image: Dimensions of the TOTAL TG1101256E Angle Grinder.

9. Garantia i Suport

For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. TOTAL products are designed for reliability and performance. If you require technical assistance or have questions regarding your TOTAL TG1101256E Angle Grinder, please contact your local TOTAL service center or the seller for support.