Introducció
This manual provides detailed instructions for the assembly, operation, and maintenance of your TONOR T10 Microphone Boom Arm. Please read this guide thoroughly to ensure proper setup and optimal performance of your equipment. The TONOR T10 is designed to securely hold your microphone, offering flexibility and stability for various recording and broadcasting applications.
Què hi ha a la caixa
Carefully unpack the contents and verify that all items are present:
- 1 x Braç de pluma
- 1 x Escriptori Clamp
- 1 x filtre pop
- 4 x lligadures de cable
- 1 x Mic Holder
- 1 x Manual (aquest document)
Instruccions de configuració
Follow these steps to correctly set up your TONOR T10 Microphone Boom Arm:
- Enganxeu l'escriptori Clamp:
Assegureu l'escriptori clamp to a sturdy surface. Ensure the contact area is maximized and the silicone pad is positioned to protect your table. The clamp supports surfaces up to 2.36 inches (6 cm) thick. Tighten the clamp fermament per evitar el moviment.
Image: Illustration showing the correct method for attaching the desk clamp to a table edge, ensuring full contact and stability. 
Imatge: Una imatge detallada view of the refined desk clamp, highlighting its large contact area and protective silicone pad for enhanced stability and surface protection. - Insert the Boom Arm:
Slide the base of the boom arm into the hole on the desk clamp. The arm should rotate freely within the clamp.
- Attach Your Microphone:
The boom arm features a standard 3/8'' screw. If your microphone requires a 5/8'' thread, use the included adapter screw. Attach your microphone or microphone shock mount to the boom arm's screw.
Image: Diagram illustrating the standard 3/8-inch screw and the included 5/8-inch adapter, demonstrating compatibility with various microphones. - Instal·leu el filtre antipop:
Attach the extra-large pop filter to the boom arm. Position it between your mouth and the microphone to effectively reduce plosive sounds and airflow noise.
Imatge: Un primer pla view of the extra-large pop filter, showing its metal net and foam layers designed to eliminate airflow noise. - Gestió de cables:
Use the four included hook-and-loop fasteners to secure your microphone cable along the boom arm. This helps organize cables and maintains a tidy workspace.
Image: Illustration demonstrating the use of hook-and-loop fasteners to neatly secure microphone cables along the boom arm, preventing clutter.
Instruccions de funcionament
The TONOR T10 Microphone Boom Arm offers extensive adjustability for optimal microphone positioning:
- Posició d'ajust: The arm can extend up to 27.56 inches (70 cm) horizontally and vertically. It features 13.78-inch (35 cm) upper and lower arms, allowing for flexible positioning.
- Rotació: The boom arm can rotate 360 degrees at its base and offers 180-degree and 240-degree articulation at its joints, providing a wide range of motion.
- Capacitat de càrrega: The reinforced boom arm has a maximum load-bearing capacity of 3.3 lbs (1.5 kg) when bent at a 90-degree angle, supporting most standard microphones.
Manteniment
To ensure the longevity and optimal performance of your TONOR T10 Microphone Boom Arm, follow these maintenance guidelines:
- Neteja: Wipe the boom arm and clamp with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Inspecció conjunta: Periodically check all joints and screws for tightness. If any part feels loose, gently tighten it to maintain stability. Do not overtighten.
- Spring Care: Keep the springs free from dust and obstructions. If the arm's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the joints, avoiding contact with the springs themselves.
- Emmagatzematge: When not in use for extended periods, store the boom arm in a clean, dry environment to prevent corrosion or damage.
Resolució de problemes
If you encounter any issues with your TONOR T10 Microphone Boom Arm, refer to the following common solutions:
- Arm is unstable or sags:
- Assegureu-vos que l'escriptori clamp is securely tightened to the table.
- Verify that your microphone's weight does not exceed the maximum load capacity of 3.3 lbs (1.5 kg).
- Check that all joint screws on the boom arm are tightened.
- Microphone does not fit the screw:
- Confirm whether your microphone requires a 3/8'' or 5/8'' thread. Use the appropriate adapter provided.
- Pop filter is ineffective:
- Ensure the pop filter is positioned correctly between your mouth and the microphone, approximately 2-6 inches away from the microphone.
- Arm movement is stiff:
- Check for any obstructions in the joints or springs.
- Apply a small amount of silicone-based lubricant to the moving parts of the joints (avoiding springs) if necessary.
Especificacions
| Marca | TONOR |
| Nom del model | T10 |
| Color | Negre |
| Material | Acer d'aliatge, acrilonitril butadiè estirè (ABS) |
| Pes de l'article | 1 quilograms |
| Dimensions de l'article (L x A x A) | 10 x 20 x 30 centímetres |
| Altura màxima | 70 centímetres |
| Tipus de base | Clamp |
| Microphone Stand Thread Size | 3/8 inch, 5/8 inch (with adapter) |
| Recomanació de pes màxim | 3.3 lliures (1.5 kg) |
Garantia
The TONOR T10 Microphone Boom Arm comes with a 2 anys de garantia del fabricant. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty information provided at the time of purchase or contact TONOR customer support.
Suport
For further assistance, technical support, or inquiries regarding your TONOR T10 Microphone Boom Arm, please visit the official TONOR weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. La informació de contacte normalment es pot trobar a l'embalatge del producte o a la presència oficial en línia de la marca.