Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ATDEC ORA Monitor ARM, Model AW-ORA-F-S. This monitor arm is designed to free up desk space and improve ergonomic comfort by allowing precise adjustment of your monitor's position. It supports monitors up to 35 inches, both flat and curved, with a weight range of 4.4 to 17.6 lbs (2 to 8 kg).
Si us plau, llegiu atentament aquestes instruccions abans de la instal·lació i conserveu aquest manual per a futures consultes.
Instruccions de configuració
Follow these steps to correctly install your ATDEC ORA Monitor ARM.
1. Desembalatge i comprovació de components
Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (not provided in this document, refer to your product packaging). If any parts are missing or damaged, do not proceed with installation and contact customer support.
2. Escriptori Clamp Instal·lació
The ORA Monitor ARM typically uses a desk clamp for secure attachment to your workstation.
- Col·loca l'escriptori clamp base on the edge of your desk.
- Apretar el clamp screw until the arm is firmly secured to the desk. Ensure the clamp és estable i no trontolla.
Image: ATDEC ORA Monitor Arms with VESA plates and desk clamps. This image illustrates the different color options and the VESA mounting plate, which attaches to the back of your monitor, and the desk clamp that secures the arm to the desk.
3. Connectar el monitor
The ORA Monitor ARM uses a VESA mounting plate to attach to your monitor.
- Locate the VESA mounting holes on the back of your monitor. These are typically 75x75mm or 100x100mm apart.
- Attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor with the attached VESA plate and slide it onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism present on the arm.
Image: Monitors mounted on ATDEC ORA arms in an office. This image demonstrates the monitor arm in use, showing two monitors attached to the arms and positioned on a desk, highlighting the space-saving and ergonomic benefits.
4. Gestió de cables
Route your monitor cables (power, video, etc.) through the integrated cable management channels or clips on the monitor arm. This helps maintain a tidy workspace and prevents cable damage.
Instruccions de funcionament
The ATDEC ORA Monitor ARM offers various adjustment capabilities for optimal viewcomoditat.
- Ajust d'alçada: Empenyeu o estireu suaument el monitor amunt o avall per aconseguir l'alçada desitjada. El mecanisme de ressort de gas el mantindrà al seu lloc.
- Ajust d'inclinació: Tilt the monitor screen up or down to reduce glare and find your preferred viewangle de ing.
- Ajust de gir: Rotate the monitor left or right to share your screen with others or adjust your viewposició d'ingrés.
- Rotació (Retrat/Paisatge): Gireu el monitor 90 graus per canviar entre les orientacions horitzontal i vertical.
- Ajust de tensió: If the arm is too stiff or too loose for your monitor's weight, use the included Allen key to adjust the tension screw on the arm. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor stays in position when released.
Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del braç del monitor.
- Neteja: Wipe the arm surfaces with a soft, damp drap. Eviteu productes de neteja o dissolvents abrasius.
- Comprovacions periòdiques: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Tensió: Re-adjust the tension if your monitor's weight changes or if the arm no longer holds its position correctly.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Monitor arm sags or drifts down. | La tensió és massa baixa per al pes del monitor. | Increase the gas spring tension using the Allen key (turn clockwise). |
| Monitor arm is difficult to move up or down. | La tensió és massa alta per al pes del monitor. | Decrease the gas spring tension using the Allen key (turn counter-clockwise). |
| El monitor trontolla o és inestable. | Escriptori clamp or VESA plate screws are loose. | Assegureu-vos que l'escriptori clamp is securely tightened. Check and tighten all VESA mounting screws on the monitor. |
| Cables are tangled or messy. | Enrutament incorrecte del cablejat. | Re-route cables through the integrated cable management channels or clips on the arm. |
Especificacions
- Número de model: AW-ORA-FS
- Marca: ATDEC
- Dispositius compatibles: Monitor
- Tipus de muntatge: Taula Clamp
- Tipus de moviment: Tilt, Swivel, Rotation, Height Adjustment (Gas Spring)
- Mida del monitor compatible: Up to 35 inches (Flat & Curved)
- Supported Monitor Weight: De 4.4 a 17.6 kg (2 a 8 lliures)
- Pes de l'article: 8.58 lliures (aprox. 3.89 kg)
- Dimensions del paquet: 22.44 x 7.09 x 5.31 polzades (aprox. 57 x 18 x 13.5 cm)
- UPC: 881493020214
- ASIN: B0C8ZPWLR5
- Fabricant: Atdec Pty Ltd
- Data de primera disponibilitat: 22 de juny de 2023
Garantia i Suport
For warranty information, technical support, or to purchase replacement parts, please refer to the official ATDEC weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
ATDEC Official Weblloc: www.atdec.com