1. Introducció
Gràcies per la compraasing the Hyundai i40 LED Car Door Projector Light. This manual provides essential information for the safe and effective use of your new product. Please read it thoroughly before installation and operation, and keep it for future reference.
2. Producte acabatview
The Hyundai i40 LED Car Door Projector Light is designed to enhance your vehicle's aesthetics and provide a welcoming light projection when the car door is opened. It projects a clear, high-definition (HD) logo onto the ground, which is designed not to fade over time.
Característiques principals:
- High-Definition (HD) logo projection.
- Designed for Hyundai i40 and compatible car models.
- Durable and fade-resistant projection.
- Easy installation, replacing existing door lights.
- Operates on 12V vehicle power.
Image: The main product, showing the 'i40' logo that will be projected.
3. Informació de seguretat
Please observe the following safety precautions to prevent injury or damage to the product and your vehicle:
- Always disconnect the car battery's negative terminal before performing any electrical work on your vehicle to prevent short circuits.
- Ensure the product is compatible with your vehicle's make and model before installation.
- No intenteu modificar o desmuntar el producte.
- Keep the product away from water and excessive heat.
- If you are unsure about the installation process, consult a qualified automotive technician.
4. Configuració i instal·lació
The installation process typically involves replacing the existing puddle lights or courtesy lights located at the bottom of your car doors. No drilling or wiring modification is usually required for compatible models.
Passos d'instal·lació:
- Preparar el vehicle: Ensure your car is turned off and the doors are open. It is recommended to disconnect the car battery's negative terminal for safety.
- Locate Existing Light: Identify the existing courtesy light or puddle light at the bottom of the car door panel.
- Remove Existing Light: Carefully pry out the existing light assembly using a flat-head screwdriver or a plastic trim removal tool. Be gentle to avoid damaging the door panel.
- Desconnecteu el cablejat: Disconnect the electrical connector from the old light assembly.
- Connect New Light: Connect the wiring harness of the new LED projector light to the car's existing electrical connector. Ensure a secure connection.
- Funcionalitat de prova: Before fully securing the new light, reconnect the car battery (if disconnected) and test the light by opening the car door. The logo should project clearly onto the ground.
- Secure New Light: Carefully push the new LED projector light assembly into the opening in the door panel until it clicks securely into place.
- Repeat for Other Doors: Follow the same steps for other car doors where you wish to install the lights.
Imatge: Frontal view of the LED door light module, showing its shape and lens.
Imatge: Enrere view of the LED door light module, showing the electrical connector and housing.
5. Instruccions de funcionament
The Hyundai i40 LED Car Door Projector Light operates automatically. When a car door is opened, the light will illuminate and project the HD logo onto the ground beneath the door. The light will turn off automatically when the door is closed.
6. Manteniment
To ensure the longevity and optimal performance of your LED Car Door Projector Light, follow these maintenance guidelines:
- Neteja: Periodically wipe the lens of the projector light with a soft, dry, lint-free cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents.
- Inspecció: Regularly check the light for any signs of damage or loose connections.
- Emmagatzematge: If removing the lights for any reason, store them in a cool, dry place away from direct sunlight.
7. Solució De Problemes
If you encounter any issues with your LED Car Door Projector Light, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Loose connection, incorrect installation, faulty wiring, or blown fuse. | Check all connections. Ensure correct polarity during installation. Inspect vehicle's fuse box for any blown fuses related to interior lighting. |
| Projected logo is dim or blurry. | Dirty lens, obstruction, or incorrect light placement. | Clean the projector lens with a soft cloth. Ensure nothing is obstructing the projection path. Verify the light is securely seated and facing downwards correctly. |
| La llum parpelleja. | Font d'alimentació inestable o connexió fluixa. | Check electrical connections for tightness. Ensure vehicle's electrical system is stable. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
8. Especificacions
| Atribut | Detall |
|---|---|
| Tipus de producte | Welcome Light / Door Projector Light |
| Voltage | 12 V |
| Pes del producte | 120 grams |
| Brand Certifications | CE, FCC |
| Origen | Xina continental |
| Característiques | HD Projection, Pattern Never Fades |
| Contingut del paquet | 1 pair of Welcome Door Lights |
| Fabricant | Genèric |
| Color del model | HD i40 |
9. Garantia i Suport
Aquest producte ve amb un 12 mesos de garantia des de la data de compra.
If you encounter any issues with the product, such as damaged or incorrect items, please do not hesitate to contact us. We are committed to providing the best solution to resolve any problems promptly.
Contacte amb l'assistència: Please send us a message through the Amazon page where you purchased the product. We aim to respond within 24 hours.