Socobeta EN06 LCD Display Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Socobeta EN06 LCD Display for electric bicycles. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Figura 1.1: The Socobeta EN06 LCD Display unit with its integrated wiring harness and 5-pin connector.

2. Informació de seguretat

• Always ensure the electric bicycle is powered off before installation or maintenance.
• Avoid exposing the display to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
• Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
• Ensure all connections are secure and waterproof (for the 5-pin interface) to prevent electrical issues.
• Regularly check the display's mounting for stability to prevent detachment during riding.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x Socobeta EN06 LCD Display Unit
• 1 x Manual d'instruccions (aquest document)

4. Configuració i instal·lació

The EN06 LCD Display is designed for easy installation on electric bicycle handlebars with a 22.2mm diameter.

1. Prepareu el manillar: Ensure the handlebar area where the display will be mounted is clean and free from obstructions. The display is compatible with 22.2mm diameter handlebars.
2. Muntar la pantalla: Loosen the mounting screw on the display's bracket. Position the display on the desired location on the handlebar. Tighten the screw securely to prevent rotation during use.


Figura 4.1: Display dimensions and handlebar clamp size (22.2mm).

3. Connecteu el cable: Locate the 5-pin connector on the display's cable. Connect it to the corresponding 5-pin port on your electric bicycle's controller or wiring harness. Ensure the connection is firm and properly aligned. The 5-pin interface is designed to be waterproof.


Figura 4.2: Detail of the 5-pin waterproof connector for secure electrical connection.

4. Gestió de cables: Paseu el cable amb cura al llarg del manillar i el quadre, i fixeu-lo amb brides si cal per evitar interferències amb la direcció o les peces mòbils.
5. Engegada inicial: After installation, power on your electric bicycle. The display should illuminate, indicating a successful connection.

5. Instruccions de funcionament

The EN06 LCD Display provides essential information and control for your electric bicycle. It operates using Communication Protocol Number 2.

Figura 5.1: The EN06 LCD Display with its three control buttons: Power, Plus (+), and Minus (-).

5.1. Funcions de visualització

The display is designed to show critical riding data:

• Potència de la bateria: Accurately reflects the remaining battery charge.
• Consum d'energia: Records real-time power usage.
• Riding Mileage: Fa un seguiment de la distància recorreguda.
• Vehicle Control and Status: Proporciona un finalview of the e-bike's operational status.

5.2. Operacions de botons

The display features three buttons for control:

• Botó d'encendre (⏻):
  • Press and hold to power the display on or off.
  • Short press to cycle through different display modes or information screens (e.g., Odometer, Trip Distance, Speed).
• Plus Button (+):
  • Increases assistance level (if applicable to your e-bike system).
  • Used for navigating menus or increasing values in settings.
• Minus Button (-):
  • Decreases assistance level (if applicable to your e-bike system).
  • Used for navigating menus or decreasing values in settings.

Note: Specific functions of the Plus and Minus buttons may vary slightly depending on the electric bicycle's controller and its integration with the EN06 display. Refer to your e-bike's main manual for detailed system-specific operations.

6. Manteniment

• Neteja: Netegeu la pantalla i casing amb un suau, damp cloth. Do not use abrasive cleaners, solvents, or spray water directly onto the unit.
• Comprovació de la connexió: Periodically inspect the 5-pin connector and cable for any signs of wear, damage, or loose connections.
• Seguretat de muntatge: Ensure the display remains firmly mounted on the handlebar. Tighten the mounting screw if any looseness is detected.
• Emmagatzematge: If storing the electric bicycle for an extended period, ensure the display is clean and stored in a dry environment.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for warranty claims.

Per a més ajuda, podeu visitar el Socobeta Store on Amazon.