KOORUI KR20Y

KOORUI Single Monitor Arm Desk Mount (Model KR20Y) Instruction Manual

Model: KR20Y | Brand: KOORUI

Introducció

Gràcies per la compraasing the KOORUI Single Monitor Arm Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

Informació de seguretat

WARNING: Failure to read and follow all instructions may result in personal injury or property damage.

Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu peces danyades.
This product is designed for monitors weighing between 2-9 kg (4.4-19.8 lbs) and screen sizes from 17 to 32 inches. Do not exceed the maximum load capacity or use with incompatible screen sizes.
The VESA mounting patterns supported are 75x75mm and 100x100mm. Verify your monitor's VESA pattern before installation.
Ensure the mounting surface (desk) is strong enough to support the combined weight of the monitor arm and your monitor.
Perform all adjustments slowly and carefully. Do not overtighten screws.
Mantingueu els nens i les mascotes allunyats durant la instal·lació. Les peces petites poden ser un perill d'asfíxia.

Contingut del paquet

Si us plau, verifiqueu que totes les peces que s'enumeren a continuació estiguin incloses al paquet. Si falta alguna peça o hi ha alguna danyada, poseu-vos en contacte amb el servei d'atenció al client.

Item	Descripció	Quantitat
Conjunt del braç del monitor	Main arm with gas spring	1
Escriptori Clamp	Per a C-clamp instal·lació	1
Base d'oelles	For grommet hole installation	1
Placa VESA	Attaches to monitor	1
Kit de maquinari	Screws, washers, Allen keys, etc.	1 set (approx. 30 pieces total)
Manual d'instruccions	Aquest document	1

Especificacions

Model: KR20Y
Tipus de muntatge: Suport de taula (Cl)amp o Ullera)
Material: Metall
Color: Negre
Mida del monitor compatible: 17-32 polzades
Capacitat de càrrega: 2-9 kg (4.4-19.8 lliures)
Compatibilitat VESA: 75x75mm, 100x100mm
Rang inclinat: +85° a -30°
Interval de rotació: ±90°
Rotació (Retrat/Paisatge): 360°
Arm Joint Rotation: 360°
Maximum Arm Height: Approximately 400mm (15.7 inches)
Maximum Arm Extension: Approximately 530mm (20.8 inches)
Clamp Mount Desktop Thickness: 20-80 mm (0.78-3.14 polzades)
Grommet Mount Desktop Thickness: 20-90 mm (0.78-3.54 polzades)
Grommet Hole Diameter: 10-50 mm (0.39-1.96 polzades)

Configuració i instal·lació

Before proceeding, ensure your desk and monitor meet the specifications listed above. This monitor arm offers two installation methods: C-Clamp and Grommet Mount.

1. Comprovació de compatibilitat

Before installation, ensure your monitor and desk meet the following requirements:

Mida del monitor: 17-32 polzades
Pes del monitor: 2-9 kg (4.4-19.8 lliures)
Patró VESA: 75x75mm o 100x100mm

Diagram showing monitor arm compatibility for 17-32 inch screens, 2-9kg weight, and 75/100mm VESA

Image: Visual guide to monitor arm compatibility, detailing supported screen sizes (17-32 inches), weight capacity (2-9 kg), and VESA mounting patterns (75x75mm, 100x100mm).

2. Trieu el mètode de muntatge

C-Clamp Muntanya

Ideal for desks with edges. Ensure your desk thickness is between 20-80mm (0.78-3.14 inches). Not suitable for desks with outer frames or sloped/uneven edges.

Muntatge de passamans

Requires an existing hole in your desk. Ensure your desk thickness is between 20-90mm (0.78-3.54 inches) and the hole diameter is 10-50mm (0.39-1.96 inches).

Diagram showing C-Clamp and Grommet Mount installation options

Image: Diagrams illustrating both the C-Clamp mount (left) and Grommet mount (right) installation methods for securing the monitor arm to a desk.

3. Fixeu la placa VESA al monitor

Col·loqueu amb cura el monitor cara avall sobre una superfície suau i neta.
Alineeu la placa VESA amb els forats de muntatge de la part posterior del monitor (75 x 75 mm o 100 x 100 mm).
Secure the VESA plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.

4. Install Monitor Arm Base

Follow the instructions specific to your chosen mounting method (C-Clamp or Grommet) to securely attach the arm base to your desk.

5. Attach Monitor to Arm

With assistance if needed, carefully slide the monitor (with VESA plate attached) onto the arm's VESA head.
Ensure the monitor is securely seated. Some VESA heads may have a locking screw; tighten it if present.

Funcionament i ajust

The KOORUI Monitor Arm allows for flexible positioning to achieve an ergonomic viewing experience. Adjustments should be made slowly and carefully.

1. Gas Spring Tension Adjustment (Height Adjustment)

The arm's vertical movement is controlled by a gas spring. If the monitor sags or floats up, you need to adjust the gas spring tension.

To increase tension (for heavier monitors or if the arm sags), turn the adjustment screw (usually located on the arm joint) clockwise.
To decrease tension (for lighter monitors or if the arm floats up), turn the adjustment screw counter-clockwise.
Adjust gradually and test the arm's movement until the monitor stays at the desired height without drifting.

For a visual guide on adjusting the monitor arm vertically, please refer to the official "How to Adjust the KOORUI Monitor Arm" video provided by the manufacturer.

2. Tilt, Swivel, and Rotation

The monitor arm offers extensive movement capabilities:

Inclinació: The VESA plate can tilt +85° (upwards) to -30° (downwards). Gently push or pull the top/bottom of your monitor to adjust the vertical angle.
Girar: The VESA plate can swivel ±90° (left/right). Rotate the monitor horizontally to adjust the viewangle de ing.
Rotació: The VESA plate allows for 360° rotation, enabling you to switch between landscape and portrait orientations.
Arm Joint Rotation: The arm joints themselves can rotate 360°, providing flexibility in positioning the arm horizontally.

Monitor arm full range of motion diagram

Image: Diagram illustrating the various tilt, swivel, and rotation capabilities of the monitor arm, including 360° arm joint rotation, 180° swivel, +85°/-30° tilt, and 360° screen rotation.

3. Ergonomic Positioning

The monitor arm facilitates various ergonomic setups, including standing desk configurations, to reduce strain during long work sessions.

User working at a standing desk with monitor mounted on the arm

Image: A person working at a standing desk, demonstrating how the monitor arm allows for comfortable vertical positioning of the screen for an ergonomic posture.

Gestió de cables

To maintain a tidy workspace and prevent cable damage, utilize the integrated cable management system.

Route your monitor cables (power, video, etc.) along the underside of the arm.
Open the cable covers on the arm sections.
Tuck the cables neatly inside the channels.
Close the cable covers to secure the cables.

Monitor arm with cables routed through cable management

Imatge: Part posterior view of a monitor mounted on the arm, showing cables neatly routed through the arm's integrated cable management channels.

Utilizing the monitor arm and its cable management features helps to free up valuable desk space, contributing to a more organized and efficient work environment.

Clean desk setup with monitor mounted on arm, illustrating space saving

Image: A desk setup with a monitor mounted on the arm, showcasing the increased usable desk space and organized appearance achieved by using the arm and its cable management.

Manteniment

Reviseu regularment tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs.
Clean the arm with a soft, damp drap. Eviteu productes de neteja o dissolvents abrasius.
Do not attempt to disassemble the gas spring mechanism. It contains high-pressure gas.

Resolució de problemes

Problema	Causa possible	Solució
Monitor arm sags or drops	La tensió de la molla de gas és massa baixa per al pes del monitor.	Increase gas spring tension by turning the adjustment screw clockwise. Refer to "Gas Spring Tension Adjustment" section.
Monitor arm floats up or is difficult to push down	Gas spring tension is too high for the monitor weight.	Decrease gas spring tension by turning the adjustment screw counter-clockwise. Refer to "Gas Spring Tension Adjustment" section.
El monitor està inestable o inestable	Mounting screws are loose; desk mount is not secure.	Check and tighten all screws on the VESA plate, arm joints, and desk mount (clamp or grommet). Ensure the desk mount is firmly attached to the desk.
Cannot achieve desired angle/movement	Movement range limits reached; friction screws too tight.	Verify the arm's specified movement ranges. Loosen any friction screws on the joints slightly if movement is too stiff. Do not loosen excessively.

Garantia i Suport

Garantia del fabricant: This product comes with a 3-year manufacturer's warranty.
Servei de reparació: Free repair service is available during the warranty period.
Reciclatge: Certified PC recycling with free collection is available.
Horari d'assistència: Monday to Friday, 9:30 AM - 5:30 PM (excluding weekends and public holidays).
For further assistance, please contact KOORUI customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.