Filta Smart Lock User Manual

1. Introducció

The Filta Smart Lock offers advanced security and convenience for your home or office. This 5-in-1 keyless entry system provides multiple unlocking options including Bluetooth App control, fingerprint recognition, password entry, traditional key access, and IC card unlocking. Designed for ease of use and robust security, this manual will guide you through the installation, setup, and operation of your new smart lock.

Image: Filta Smart Lock with its accompanying mobile application interface.

2. Informació de seguretat

Si us plau, llegiu atentament totes les instruccions abans de la instal·lació i l'ús. Conserveu aquest manual per a futures consultes.

• No intenteu desmuntar ni reparar el pany vosaltres mateixos. Això podria anul·lar la garantia i causar danys.
• Feu servir només les piles especificades (4 piles AA). No barregeu piles velles i noves ni piles de diferents tipus.
• Avoid exposing the lock to direct sunlight, rain, or extreme temperatures.
• Mantingueu el sensor d'empremtes dactilars net i sec per a un rendiment òptim.
• Ensure all screws are tightened securely during installation to prevent loosening.
• Regularly check the battery level and replace batteries promptly when low to avoid lockouts.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Exterior Smart Lock Assembly (with keypad and fingerprint sensor)
• Interior Smart Lock Assembly (with battery compartment and thumb turn)
• Placa de muntatge
• Pestillo de cèrcol
• Placa de vaga
• Caixa de vaga
• Installation Screws (various sizes)
• Claus físiques (2)
• IC Cards (2)
• Plantilla d'instal·lació
• Manual d'usuari

Image: All components included in the Filta Smart Lock package.

4. Especificacions

5. Guia d'instal·lació

Follow these steps carefully to install your Filta Smart Lock. A screwdriver is the only tool required.

5.1. Door Compatibility Check

Ensure your door meets the following specifications for proper installation:

• Gruix de la porta: 1 5/16" ~ 2" (33mm - 50mm)
• Diàmetre del forat: 2 1/8" (54 mm)
• Retrocés del forat: 2 3/8" or 2 3/4" (60mm or 70mm)

Image: Door preparation diagram with measurements for thickness, bore hole diameter, and backset.

5.2. Instal·lació pas a pas

1. Ajusteu el pestell del forrellat: If necessary, adjust the deadbolt latch to fit your door's backset (60mm or 70mm). The bolt can be adjusted by twisting and pulling/pushing.
2. Instal·leu el pestell de forrellat: Slide the deadbolt latch into the door edge hole. Ensure the bolt is centered and the "UP" arrow is facing upwards. Secure it with the provided screws.
3. Instal·lació del conjunt exterior: Slide the lock spindle and wire connector from the exterior smart lock assembly through the deadbolt latch and the door hole. Ensure the exterior assembly sits flush against the door.
4. Instal·leu la placa de muntatge: Thread the wire connector through the mounting plate. Secure the mounting plate to the door using the long screws, ensuring it is aligned and stable.
5. Connect Wires and Install Interior Assembly: Connect the wire connector from the exterior assembly to the wire connector port on the interior smart lock assembly. Carefully tuck excess wires into the door cavity. Align the interior assembly with the mounting plate and secure it with screws.
6. Instal·leu les bateries: Open the battery compartment on the interior assembly. Insert 4 AA batteries, ensuring correct polarity. Close the battery box securely.
7. Test Lock Core: Before closing the battery cover, use a physical key to test if the lock core is properly installed and the deadbolt operates smoothly.

6. App and Lock Setup

Your Filta Smart Lock can be managed and configured via the dedicated mobile application.

6.1. Instal·lació de l'aplicació i registre del compte

1. Download the 'Tuya Smart' or 'Smart Life' app from your device's app store (iOS App Store or Google Play Store).
2. Open the app and register a new account using your email address or phone number. Follow the on-screen prompts to complete the registration and verification process.

6.2. Connecting the Lock to the App (Bluetooth)

1. Assegureu-vos que el Bluetooth estigui habilitat al vostre telèfon intel·ligent.
2. Open the app and tap 'Add Device' or the '+' icon.
3. The app will search for nearby Bluetooth devices. Select 'Smart_Lock' from the discovered devices.
4. Follow any additional prompts to confirm the connection. Once connected, you can control the lock via the app.

6.3. Adding Users and Unlocking Methods via App

The app allows you to manage various unlocking methods and user permissions.

• Afegir empremtes dactilars: Navigate to 'Fingerprint Management' in the app. Tap 'Add Fingerprint' and follow the instructions to place your finger on the lock's sensor multiple times until registered.
• Adding Passwords: Go to 'Password Management'. Tap 'Add Password' to create a new permanent or temporary password. You can also generate a random password.
• Adding IC Cards: Select 'Card Management'. Tap 'Add Card' and present the IC card to the lock's sensor to register it.
• Adding Members: In 'Member Management', you can add family members (with full control) or other members (with limited permissions) to access the lock.

6.4. Adjusting Lock Settings via App

Within the app's settings, you can customize various aspects of your lock:

• Voice Volume: Adjust the voice prompts volume (Mute, Level-1, Level-2, Normal).
• Idioma del dispositiu: Change the language of the lock's voice prompts (e.g., English, Simplified Chinese).
• Motor Rotation Direction: Set the correct door opening direction (Left door opening, Right door opening) to ensure proper lock operation.
• Bloqueig automàtic: Enable or disable the automatic locking feature and set the delay time.

7. Instruccions de funcionament

Your Filta Smart Lock offers multiple convenient ways to secure and access your property.

Image: Visual representation of the five unlocking methods available for the smart lock.

7.1. Unlocking the Lock

• Empremta digital: Col·loca el dit registrat al sensor d'empremtes dactilars. El bloqueig es desbloquejarà si es reconeix l'empremta dactilar.
• Contrasenya: Enter your registered password on the keypad, then press the '#' key. The lock will unlock if the password is correct.
• Targeta IC: Present your registered IC card to the card reader area on the lock. The lock will unlock if the card is recognized.
• Aplicació Bluetooth: Open the app, select your lock, and tap the unlock icon. You may need to hold the unlock button in the app.
• Clau física: Insert the physical key into the keyhole and turn to unlock, just like a traditional lock.

7.2. Locking the Lock

• Bloqueig automàtic: If enabled in the app settings, the lock will automatically lock after a set delay once the door is closed.
• Bloqueig manual: From the outside, press the '#' key on the keypad. From the inside, turn the thumb turn to the locked position.
• Aplicació Bluetooth: Open the app, select your lock, and tap the lock icon.

7.3. Adding Fingerprint/Password Directly on Lock (Admin Mode)

You can add fingerprints and passwords directly on the lock without the app, typically after initial setup. This requires entering administrator mode.

1. Entra al mode d'administrador: Press '2' then '#' on the keypad.
2. Afegeix empremta digital: Place your finger on the sensor multiple times as prompted until successfully registered.
3. Afegeix la contrasenya: Enter your desired password (6-8 digits) and press '#'. Re-enter the password and press '#' to confirm.

7.4. Changing Normally Open Mode

This mode keeps the lock unlocked until manually locked.

1. Activar/Desactivar: Press '3' then '#' on the keypad. The lock will confirm the change.

7.5. Changing Language

To change the voice prompt language directly on the lock:

1. Canvia l'idioma: Press '4' then '#' on the keypad. The lock will cycle through available languages.

8. Manteniment

Proper maintenance ensures the longevity and optimal performance of your smart lock.

• Neteja: Wipe the lock's surface and fingerprint sensor with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Substitució de la bateria: Replace all four AA batteries when the low battery indicator appears or when the lock's voice prompts indicate low power. Do not wait until batteries are completely drained.
• Actualitzacions de firmware: Periodically check the mobile app for any available firmware updates for your lock. Updates can improve performance and security.
• Comprovació mecànica: Occasionally check that all screws are tight and the deadbolt operates smoothly without obstruction.

9. Solució De Problemes

If you encounter issues with your Filta Smart Lock, refer to the following common problems and solutions:

10. Garantia i Suport

FILTA provides a limited warranty for this smart lock. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact FILTA customer service through the following channels:

• Correu electrònic: support@filta.com
• Weblloc: Visit the official FILTA weblloc web per a preguntes freqüents i recursos de suport.
• Botiga Amazon: You can also reach out via the FILTA Store on Amazon.

Please have your product model number (2f0b905e-b558-4f8d-9106-9f75a68b2a3f) and purchase information ready when contacting support.