Crivit Auriol Radio-Controlled Alarm Clock

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your Crivit Auriol Radio-Controlled Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and safety.

Figura 1: Frontal view of the Crivit Auriol Radio-Controlled Alarm Clock. The LCD screen displays the current time, date, and indoor temperature.

Informació de seguretat

• No exposeu el dispositiu a temperatures extremes, llum solar directa ni humitat elevada.
• Eviteu deixar caure el dispositiu o sotmetre-lo a forts impactes.
• No desmunteu ni intenteu reparar el dispositiu vosaltres mateixos. Envieu totes les tasques de manteniment a personal qualificat.
• Mantingueu el dispositiu allunyat de l'aigua i altres líquids.
• Feu servir només l'adaptador de corrent proporcionat o les piles recomanades.
• Assegureu-vos una ventilació adequada al voltant del dispositiu.

Contingut del paquet

Si us plau, comproveu que tots els elements siguin presents i en bon estat:

• Crivit Auriol Radio-Controlled Alarm Clock (Model: 373928)
• Adaptador de corrent alterna
• Manual d'usuari (aquest document)
• (Batteries not included, typically requires 2x AAA for backup)

Figure 2: Included AC Power Adapter for the alarm clock.

Característiques del producte

• Temps controlat per ràdio: Automatic time synchronization for accuracy.
• Funció de projecció: Projects time, alarm time, or ambient temperature onto a wall or ceiling.
• Projecció ajustable: 4 adjustable projection orientations and easy focus adjustment via a dial.
• Alarmes dobles: Two independent alarms with snooze function.
• Pantalla LCD: Clear display showing time, date (day, month), and day of the week or calendar week.
• Sensor tàctil: For short-term projection activation and display backlight.
• Opcions d'energia: Operates on battery or AC adapter.
• Sortida USB-A: 5V, 800mA output for charging electronic devices.

Figure 3: The alarm clock with its projection arm extended, ready to project information onto a surface.

Configuració

1. Alimentació del dispositiu

The alarm clock can be powered by the included AC adapter or by batteries (for backup). For continuous operation and to use the USB charging feature, the AC adapter is recommended.

• Alimentació CA: Connect the provided AC adapter to the DC IN port on the back of the alarm clock. Plug the adapter into a standard wall outlet.
• Còpia de seguretat de la bateria: Open the battery compartment on the back of the device. Insert 2x AAA batteries (not included), ensuring correct polarity (+/-). Batteries primarily serve as backup in case of power outage, maintaining time settings.

Figura 4: posterior view of the alarm clock, showing the battery compartment cover and various control buttons for settings.

2. Configuració Inicial

Upon first power-on, the device will attempt to synchronize with the radio-controlled time signal. This process may take several minutes. Ensure the device is placed away from electronic interference.

• Configuració d'idioma: Press the "LANG" button (located on the back) to cycle through the available languages for the day of the week display (e.g., English, German, French, Italian, Spanish).
• Format horari: Premeu el botó "12/24" per canviar entre els formats de 12 hores i 24 hores.
• Unitat de temperatura: Press the "°C/°F" button to toggle between Celsius and Fahrenheit for temperature display.

Figure 5: Detail of the control buttons on the back of the alarm clock, including LANG, 12/24, and °C/°F buttons, and the FOCUS wheel for the projection.

Instruccions de funcionament

Setting Time and Date Manually (if radio control fails)

In rare cases or areas with poor signal, you may need to set the time manually.

1. Press and hold the "MODE" button (usually located on the back or bottom) until the hour digits flash.
2. Use the "+" or "-" buttons to adjust the hour.
3. Press "MODE" again to move to minutes, then year, month, and day, adjusting each with "+" or "-".
4. Press "MODE" to confirm settings and exit.

Configuració d'alarmes

The device supports two independent alarms (Alarm 1 and Alarm 2).

1. Press the "ALARM" button (often indicated by a bell icon) once to select Alarm 1, twice for Alarm 2. The alarm icon will flash.
2. Press and hold the "ALARM" button until the alarm hour digits flash.
3. Use the "+" or "-" buttons to set the desired alarm hour.
4. Press "ALARM" again to move to minutes, then adjust with "+" or "-".
5. Press "ALARM" to confirm. To activate/deactivate an alarm, press the "ALARM" button briefly until the alarm icon appears/disappears on the display.

Funció de posposar

When an alarm sounds, touch the sensor area (or press the snooze button, if present) to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5-10 minutes (duration may vary by model). To turn off the alarm completely, press any other button.

Característiques de projecció

The alarm clock can project time, alarm time, or temperature onto a surface.

• Activating Projection: Extend the projection arm. Touch the sensor area on top of the clock to activate the projection for a short period. For continuous projection, ensure the AC adapter is connected and check if there's a dedicated projection ON/OFF switch (refer to device markings).
• Changing Projected Information: Some models allow cycling through time, alarm time, or temperature projection by pressing a specific button (e.g., "PROJECTION" or "MODE" repeatedly while projection is active).
• Ajust de l'angle de projecció: The projection arm can be pivoted to direct the projection onto the desired surface (wall or ceiling).
• Ajust del focus: Use the "FOCUS" wheel (located on the projection arm) to sharpen the projected image.
• Projection Orientation: The device offers 4 adjustable projection orientations. This typically involves rotating the projection lens or using a dedicated button to flip the projected image.

Figure 6: The alarm clock in operation, demonstrating its time projection feature on a wall.

Retroil·luminació de la pantalla

The LCD display has a backlight for improved visibility in low light conditions. Touch the sensor area to activate the backlight for a few seconds. Some models may have adjustable brightness settings, typically controlled by a dedicated button or by holding the touch sensor.

Sortida de càrrega USB-A

The alarm clock features a USB-A port (5V, 800mA) on its side, allowing you to charge small electronic devices like smartphones or MP3 players. Ensure the alarm clock is powered by the AC adapter for this function.

Manteniment

Neteja

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the surface or internal components. For the projection lens, use a lens cleaning cloth to avoid scratches.

Resolució de problemes

Especificacions

Garantia i Suport

Per obtenir informació sobre la garantia i assistència al client, consulteu la documentació proporcionada en el moment de la compra o poseu-vos en contacte directament amb el distribuïdor/fabricant. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

For further assistance, visit the official Crivit weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.