Informació important de seguretat
Please read all safety instructions carefully before using the UTRAI T1 Portable Jump Starter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Llegeix el manual: Always read and understand the entire user manual before operating the device.
- Mantenir allunyat dels nens: This device is not a toy. Keep it out of reach of children.
- Ventilació adequada: Utilitzeu el dispositiu en una zona ben ventilada.
- Eviteu curtcircuits: No permeteu el cl positiu i negatiuampes toquin entre si o el mateix objecte metàl·lic.
- Polaritat correcta: Ensure correct polarity connection to the vehicle battery terminals. Incorrect connection will trigger safety warnings.
- Temperatura de funcionament: Do not operate the device outside its specified operating temperature range (-4°F to 140°F / -20°C to 60°C).
- Càrrega: Charge the device only with the provided USB Type-C cable.
- Emmagatzematge: Store the device in a cool, dry place when not in use. Recharge every 2-3 months to maintain battery health.
- Dispositiu danyat: Do not use the device if it is damaged, cracked, or has a damaged cable. Contact support for assistance.
Producte acabatview
Contingut del paquet
The UTRAI T1 Portable Jump Starter package includes the following items:
- 1x UTRAI T1 Car Battery Jump Starter
- 1x Clip de pont intel·ligent
- 1x cable USB tipus C
- 1 x manual d'usuari
Image: The complete package contents of the UTRAI T1 Portable Jump Starter, showing the main device, smart jumper cables, a USB-C charging cable, and the instruction manual.
Característiques del producte
The UTRAI T1 is designed for versatility and reliability:
- Alt rendiment: Delivers 2000A peak current to start 12V vehicles, suitable for up to 7.5L gas and 5.5L diesel engines.
- Compacte i portàtil: Small size (6.02 x 3.19 x 1.02 inches, 0.3 Kg) for easy storage and transport.
- Funcionalitat del banc d'energia: 13200mAh capacity with USB outputs (5V/2.1A) and Quick Charge 3.0 port for charging mobile devices.
- Llanterna LED 3 en 1: Features three modes: Strobe Light, SOS Light, and Solid Light for various situations.
- Proteccions de seguretat avançades: Incorporates 8 types of protection, including anti-spark, reverse polarity, low temperature, high temperature, and overload protection.
- Construcció duradora: Made from PC+ABS material, making it fireproof, waterproof, dustproof, and dropproof. Operates reliably in extreme temperatures.
Image: The UTRAI T1 Portable Jump Starter main unit, showcasing its compact design, along with the smart jumper clips and a USB-C charging cable.
Image: A hand holding the UTRAI T1 Jump Starter, emphasizing its compact and lightweight design for portability.
Image: A visual representation of the UTRAI T1's 8-layer smart protection system, detailing features like short circuit, high/low temperature, and reverse polarity protection.
Identificació de components
The UTRAI T1 consists of the main jump starter unit and smart jumper clips. The main unit features power output ports, USB charging ports, and an LED flashlight. The smart jumper clips have distinct red (positive) and black (negative) clamps with built-in safety indicators.
Configuració
S'està carregant el Jump Starter
Before initial use, fully charge the UTRAI T1. For optimal performance, ensure the device is charged above 25% before jump-starting a vehicle. If the jump starter has not been used for an extended period, it is recommended to charge it every 2-3 months to maintain its battery pack in a healthy state.
- Connect the provided USB Type-C cable to the input port on the jump starter.
- Connect the other end of the USB Type-C cable to a suitable USB power adapter (not included) or a powered USB port.
- The indicator lights on the device will show the charging status. The device is fully charged when all indicator lights are solid.
Comprovació del nivell de la bateria
Press the power button briefly to check the current battery level of the jump starter. The LED indicators will illuminate to show the remaining charge.
Instruccions de funcionament
Arrancar un vehicle
Segueix aquests passos amb cura per engegar el teu vehicle amb seguretat:
- Ensure the jump starter has at least 25% charge.
- Connect the smart jumper clip cable to the jump starter's output port.
- Connecteu el vermell (+) clamp al terminal positiu de la bateria del vehicle.
- Connecteu el negre (-) clamp al terminal negatiu de la bateria del vehicle.
- If the smart clip indicator buzzes or flashes, it indicates an incorrect connection. Disconnect and re-connect the clamps correctament.
- Once connected correctly, start your vehicle's engine.
- After the vehicle starts, immediately unplug the smart jumper clip cable from the jump starter unit first.
- Then, remove the negre (-) clamp de la bateria del vehicle, seguit de vermell (+) clamp.
Image: The UTRAI T1 Jump Starter connected to a vehicle battery, demonstrating the proper setup for jump-starting a car.
Ús com a Power Bank
The UTRAI T1 can charge your electronic devices:
- Connecteu el cable de càrrega USB del dispositiu a un dels ports de sortida USB de l'arrencador de bateria.
- L'arrencador començarà a carregar el dispositiu automàticament.
Image: The UTRAI T1 Jump Starter functioning as a power bank, simultaneously charging a smartphone, tablet, and other small electronic devices.
Utilització de la llanterna LED
The built-in LED flashlight offers three modes for various needs:
- Press and hold the flashlight button to turn on the solid light mode.
- Press the button again to cycle through Strobe Light mode.
- Press the button a third time to activate SOS Light mode.
- Premeu i manteniu premut el botó de nou per apagar la llanterna.
Image: The UTRAI T1 Jump Starter's LED flashlight in operation, highlighting its three modes: SOS, Strobe, and standard illumination.
Image: A person utilizing the UTRAI T1 Jump Starter's bright LED flashlight to inspect a car engine in low-light conditions, demonstrating its utility as a work light.
Manteniment
Proper maintenance ensures the longevity and reliability of your UTRAI T1 Jump Starter:
- Càrrega regular: Recharge the device every 2-3 months, even if not in use, to prevent deep discharge and maintain battery health.
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
- Emmagatzematge: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Inspeccionar els cables: Periodically inspect the smart jumper clips and cables for any signs of damage, fraying, or corrosion. Replace if necessary.
Resolució de problemes
If you encounter issues with your UTRAI T1, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El vehicle no arrenca. | Jump starter battery is too low. Incorrect connection. Vehicle battery is severely damaged. | Ensure jump starter is above 25% charge. Re-check connections for correct polarity. Consult a mechanic if vehicle battery is beyond jump-starting. |
| Smart clip indicator buzzes or flashes. | Incorrect polarity connection. Short circuit detected. | Desconnectar clamps and re-connect them to the correct battery terminals (red to positive, black to negative). Ensure clamps do not touch each other. |
| Jump starter does not charge. | Faulty charging cable or adapter. Damaged charging port. | Try a different USB Type-C cable and power adapter. Contact customer support if the issue persists. |
| LED flashlight does not turn on. | Jump starter battery is depleted. Faulty LED. | Charge the jump starter. Contact customer support if the issue persists after charging. |
Especificacions
| Característica | Especificació |
|---|---|
| Model | T1 |
| Corrent màxima | 2000 Amps |
| Capacitat de la bateria | 13200 mAh |
| Compatibilitat del motor | Fins a 7.5 l de gasolina, 5.5 l de dièsel |
| Sortida USB | 5V/2.1A (Quick Charge 3.0) |
| Entrada tipus C | 5V/2A |
| Dimensions del producte | 5.91 x 3.35 x 1.02 polzades (15 x 8.5 x 2.6 cm) |
| Pes de l'article | 1.52 lliures (0.69 kg) |
| Temperatura de funcionament | -4 °F a 140 °F (-20 °C a 60 °C) |
Garantia i Suport
The UTRAI T1 Portable Jump Starter comes with a 2 any de garantia i suport tècnic de per vida.
If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact UTRAI customer support. Our team is available to provide technical assistance and resolve any issues you may encounter.
For support, please refer to the contact information provided on the UTRAI official weblloc web o la documentació de la compra.