CHIVALZ Genuine HY1800 Air Purifier Replacement Filter User Manual

Producte acabatview

The CHIVALZ Genuine HY1800 Air Purifier Replacement Filter features a 3-in-1 filtration system designed to improve air quality. It includes a Fine Preliminary Filter, a True HEPA Filter, and an Activated Carbon Filter. This filter is specifically designed for the CHIVALZ HY1800 Air Purifier.

Diagrama que il·lustra els trestages of filtration: Pre-Filter, True HEPA Filter, and Activated Carbon Filter.

Image showing the CHIVALZ HY1800 Air Purifier with a replacement filter, highlighting its effectiveness against common airborne particles and odors.

Característiques clau

• Genuine HEPA Filter: Designed for the CHIVALZ HY1800 air purifier, ensuring compatibility and optimal performance.
• Sistema de filtració 3 en 1: Combines a Fine Preliminary Filter, True HEPA Filter, and Activated Carbon Filter for comprehensive air purification.
• Fine Preliminary Filter: Captures larger particles like fluff, fiber, and hair, extending the lifespan of subsequent filters.
• Filtre HEPA veritable: Meets High-Efficiency Particulate Air (HEPA) standards, effectively filtering pet dander, dust, pollen, and other microscopic particles as small as 0.1 microns.
• Filtre de carbó activat: Utilizes premium granular activated carbon to absorb odors and fumes such as smoke, cooking smells, pet odors, and Volatile Organic Compounds (VOCs).
• Designed for Pet Owners: Specifically effective in filtering pet hair, dander, and odors, making it suitable for households with pets.

Banner image detailing the high-efficiency filtration process of the CHIVALZ HY1800 filter.

Close-up image of the pre-filter layer, designed to capture lint, fibers, and hair.

Close-up image of the True HEPA filter, which captures microscopic particles.

Close-up image of the activated carbon filter, responsible for odor and VOC absorption.

Setup: Filter Replacement

Substitució del filtre

To maintain optimal performance, replace the air purifier filter regularly.

1. Turn OFF and Unplug: Assegureu-vos que el purificador d'aire estigui apagat i desendollat ​​de la presa de corrent.
2. Accedir al filtre: Gently twist the bottom cover of the air purifier counter-clockwise to unlock and remove it.
3. Elimina el filtre antic: Carefully lift out the used filter and dispose of it properly.
4. Insereix un filtre nou: Place the new CHIVALZ Genuine HY1800 Replacement Filter into the air purifier. Ensure it sits securely.
5. Replace Bottom Cover: Align the bottom cover and twist it clockwise to lock it back into place.
6. Plug In and Power ON: Torneu a connectar el purificador d'aire a la presa de corrent.
7. Restableix l'indicador del filtre: Press and hold the power button for approximately 7 seconds until the red power indicator light flashes 3 times and turns white. This resets the filter life monitor.

Visual guide showing the four steps for easy filter installation and reset.

Instruccions de funcionament

Control de potència i velocitat

The air purifier is controlled by a single power button.

1. Primera premsa: Powers on the unit into Sleep Mode.
2. Segona premsa: Switches to Low Speed Mode.
3. Tercera premsa: Activates High Speed Mode.
4. Quarta premsa: Apaga la unitat.

Funció de temporitzador

To activate the 4-hour automatic shut-off timer, press and hold the power button for 3-4 seconds while the unit is in Low or High Speed Mode. The indicator light will flash to confirm the timer is set.

Manteniment

Vida útil del filtre

The filter life depends on usage and air quality. It is recommended to replace the filter every 6-8 months for optimal performance. The air purifier's indicator light will signal when a replacement is due.

Neteja

The replacement filter is not washable. For best results, replace the filter as recommended. The exterior of the air purifier can be wiped clean with a soft, dry cloth.

Resolució de problemes

Filter Reset Issue

If the red power indicator light continues to flash after replacing the filter, it means the filter life monitor needs to be reset.

1. Ensure the new filter is correctly installed and the bottom cover is securely closed.
2. Connecteu el purificador d'aire i engegueu-lo.
3. Press and hold the power button for approximately 7 seconds until the red light flashes three times and then turns white. This confirms the reset.

Especificacions

• Dimensions del producte: 5.11 cm de llargada x 11.81 cm d'amplada x 5.9 cm de gruix
• Pes de l'article: 0.76 lliures
• Material: HEPA
• Classificació MERV: 13
• Dispositius compatibles: CHIVALZ HY1800 Air Purifier
• Nombre d'articles: 2 (Replacement Filters)
• Fabricant: CHIVALZ
• Número de model: HY1800

Garantia i Suport

Informació de la garantia

Specific warranty details for this replacement filter are not provided in this manual. Please refer to the original air purifier's user manual or contact CHIVALZ customer support for warranty information.

Atenció al client

For further assistance or inquiries, please visit the official CHIVALZ store or contact their customer service.

Visit the CHIVALZ Store