1. Introducció
Thank you for choosing the Akozon B810 Electric Bicycle Display. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your display unit. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
2. Informació de seguretat
- Always ensure the power is off before installing or disconnecting the display unit.
- Avoid exposing the display to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
- Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
- Keep the display unit dry. Although it is waterproof, prolonged immersion or high-pressure water jets should be avoided.
- Ensure all cable connections are secure to prevent short circuits or intermittent operation.
3. Producte acabatview
The Akozon B810 is a compact and durable display unit designed for electric bicycles and scooters. It provides essential information and control functions for your electric vehicle.
Característiques principals:
- Clear LED battery indicator.
- Power control with multiple assist levels.
- Automatic sleep function after 10 minutes of inactivity.
- Fault indication for quick diagnosis.
- Lightweight, waterproof, and durable construction.
Components:
The display unit features an ON/OFF button, a MODE button for power assist levels, a '6km' button (typically for walk-assist), and LED indicators for battery level and power assist mode.
Primer pla view of the Akozon B810 display unit, highlighting the ON/OFF, MODE, and 6km buttons, along with the LED indicators for power and assist levels.
The Akozon B810 control module, featuring circular buttons and an extended cable for connection to the e-bike or scooter system.
4. Configuració i instal·lació
Muntatge de la pantalla:
- Identify a suitable location on your handlebar, typically near the grip, that allows for easy access and visibility.
- Utilitzeu el cl integratamp on the back of the display unit to secure it to the handlebar. Ensure it is tightened firmly but do not overtighten to avoid damage.
The Akozon B810 display unit shown mounted on the handlebar of a white electric bicycle.
Connexió del cablejat:
The B810 display connects to your electric bicycle or scooter controller via a 5-wire cable. Ensure correct polarity and connection for proper function.
Detallada view of the 5-wire cable connector and its corresponding functions for the Akozon B810 display.
| Seqüència núm. | Color del filferro | Funció |
|---|---|---|
| 1 | Red (Vcc) | Display Power cable |
| 2 | Blue (Ds) | Cable d'alimentació del controlador |
| 3 | Negre (GND) | Display Ground cable |
| 4 | Verd (RX) | Mostra el cable de recepció de dades |
| 5 | Groc (TX) | Mostra el cable d'enviament de dades |
Connect the 5-wire cable from the display unit to the corresponding port on your e-bike or scooter controller. Ensure the connector is fully seated and secured.
5. Instruccions de funcionament
Encès/apagat:
- To power on the display, press and hold the ON/OFF button for a few seconds until the indicators light up.
- Per apagar-lo, manteniu premut el botó ON/OFF de nou fins que els indicadors s'apaguin.
- The display will automatically enter sleep mode after 10 minutes of inactivity to conserve battery.
Indicador de bateria:
The LED segments labeled "POWER" indicate the current battery charge level. More lit segments mean a higher charge.
Power Assist Levels:
- Premeu el botó MODE button to cycle through different power assist levels (e.g., LOW, MED, HIGH).
- The corresponding LED indicators (LOW, MED, HIGH) will illuminate to show the selected assist level.
6km Walk Assist:
Premeu el botó 6 km button to activate the walk-assist function, which provides a steady low-speed assist for walking alongside your e-bike or scooter.
Indicació d'error:
In case of a system malfunction, the display is designed to show a fault indication. Refer to the troubleshooting section or contact support if a fault is indicated.
6. Manteniment
- Neteja: Wipe the display surface with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Connexions: Comproveu periòdicament totes les connexions dels cables per assegurar-vos que estiguin ben fixades i que no presentin corrosió ni danys.
- Emmagatzematge: When not in use for extended periods, store the display in a dry, cool place away from direct sunlight.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla no s'encén | Loose cable connection, no power from battery, faulty display. | Check all 5-wire connections. Ensure e-bike/scooter battery is charged and powered on. If problem persists, contact support. |
| Sense ajuda elèctrica | Incorrect assist level selected, motor/controller issue, fault indicated. | Press MODE button to select a higher assist level. Check for fault indications on the display. Consult your e-bike/scooter manual for motor/controller troubleshooting. |
| Lectura incorrecta de la bateria | Battery not fully charged, aging battery, connection issue. | Ensure battery is fully charged. Check battery connections. If the issue persists, the battery may need servicing or replacement. |
| La pantalla mostra el codi d'error | Mal funcionament del sistema. | Note the error code and refer to your e-bike/scooter controller manual for specific meanings. Contact support with the error code if necessary. |
8. Especificacions
- Vol. Operatiutage: 36-48V
- Composició del material: Plàstic ABS
- Compatibilitat: Electric bicycles and electric scooters
- Pes: Aproximadament 120 grams
- Dimensions: Small (Compact design)
- Cable: Connexió de 5 fils
9. Garantia i Suport
Akozon products are designed for reliability and performance. For specific warranty details, please refer to the purchase documentation or contact your retailer. For technical support or inquiries, please visit the official Akozon store or contact customer service through your point of purchase.
You can visit the Akozon store for more information: Akozon Store