Introducció
Thank you for choosing the TFA Dostmann XENA HOME Radio Thermometer, Model 30.3074.10. This device provides accurate indoor temperature and humidity readings, along with outdoor temperature transmitted wirelessly from an external sensor. It also features a radio-controlled clock with date display and min/max value memory. This manual will guide you through the setup, operation, and maintenance of your new thermometer.
Informació de seguretat
- Conserveu aquest manual d'instruccions per a referència futura.
- No exposeu el dispositiu a temperatures extremes, vibracions o cops.
- Eviteu la llum solar directa i la humitat.
- No submergiu el dispositiu en aigua.
- Feu servir només les piles especificades. Assegureu-vos de la polaritat correcta.
- Mantingueu les piles fora de l'abast dels nens.
- Desfeu-vos de les piles gastades i del dispositiu d'acord amb la normativa local.
Contingut del paquet
- TFA Dostmann XENA HOME Main Display Unit (Model 30.3074.10)
- Sensor exterior sense fils
- Manual d'instruccions
Configuració
1. Instal·lació de la bateria
The device requires 4 AA batteries (not included).
- Unitat de visualització principal: Obriu la tapa del compartiment de les piles a la part posterior de la unitat principal. Introduïu 2 piles AA, observant la polaritat correcta (+/-). Tanqueu la tapa.
- Sensor exterior sense fil: Open the battery compartment cover on the back of the sensor. Insert 2 AA batteries, observing the correct polarity (+/-). Close the cover.
posterior view of the TFA Dostmann XENA HOME main display unit, showing the battery compartment and wall-mounting hole.
The external wireless sensor for the TFA Dostmann XENA HOME thermometer, designed for outdoor temperature transmission.
2. Col·locació del sensor
Place the wireless outdoor sensor in a sheltered location outdoors, away from direct sunlight and rain, to ensure accurate temperature readings. The maximum transmission range is 100 meters in open areas.
3. Sincronització inicial
After inserting batteries, the main unit will automatically search for the outdoor sensor and the radio-controlled time signal. This process may take a few minutes. Ensure both units are within range of each other.
4. Configuració de data i hora
The radio-controlled clock will automatically set the time and date. If manual adjustment or time zone correction is needed:
- Premeu el botó SET button to enter settings mode.
- Utilitza el +/- botons per ajustar els valors.
- Premeu SET again to confirm and move to the next setting (e.g., time zone, 12/24 hour format, date format).
Instruccions de funcionament
1. Mostra mésview
Davant view of the TFA Dostmann XENA HOME main display unit, showing the time, date, indoor temperature, humidity, and outdoor temperature.
The large LCD display shows:
- A dalt: Hora i data controlades per ràdio.
- Middle (IN): Indoor temperature and humidity, with a comfort level indicator (smiley face).
- Bottom (OUT): Outdoor temperature received from the wireless sensor.
2. Min/Max Values
Premeu el botó MAX/+ button once to display the maximum recorded indoor/outdoor temperature and humidity. Press it again to view the minimum recorded values. The display will also show the time and date when these values were recorded. To reset the min/max values, press and hold the MIN/- botó mentre viewing the min/max values. The values automatically reset at 0:00h daily.
3. Adding Additional Sensors
The thermometer can be expanded with up to 3 additional wireless transmitters (models 30.3255.02 or 30.3250.02). To add a new sensor:
- Install batteries in the new sensor.
- On the main unit, press the CANAL button to cycle through available channels.
- The main unit will automatically search for and connect to the new sensor on an unoccupied channel.
Manteniment
Neteja
Netegeu el dispositiu amb un suau, damp drap. No utilitzeu productes de neteja abrasius ni dissolvents. Assegureu-vos que no entri humitat al dispositiu.
Canvi de bateria
When the low battery indicator appears on the display, replace all batteries in the respective unit (main unit or sensor) with new ones. Always replace all batteries at the same time to ensure optimal performance.
Emmagatzematge
Si no heu d'utilitzar el dispositiu durant un període prolongat, traieu-ne les piles per evitar fuites i danys.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha visualització de la temperatura exterior. | Sensor out of range, low sensor batteries, interference. | Move sensor closer to the main unit. Replace sensor batteries. Relocate units to avoid interference. Perform a manual search for the sensor. |
| Incorrect time display. | Radio signal interference, time zone incorrect. | Move the main unit to a location with better signal reception. Manually adjust the time zone setting. |
| La pantalla està tènue o en blanc. | Low main unit batteries. | Substituïu les piles de la unitat principal. |
Especificacions
- Model: 30.3074.10
- Marca: TFA Dostmann
- Font d'alimentació: Battery powered (4 x AA batteries, not included)
- Tecnologia de connectivitat: 433 MHz, wireless
- Precisió de la temperatura: 0.5 °C
- Precisió de lectura de temperatura: +/- 1 ° C
- Upper Operating Temperature: 60 °C
- Tipus de visualització: LCD
- Tipus de material: Plàstic
- Color: Gris
- Item Dimensions (Depth x Width x Height): 2.7 de profunditat x 8.2 d'amplada x 14 d'alçada cm
- Pes de l'article: 128 grams
- Característiques especials: High precision, Large display, Low battery indicator, High accuracy, Non-contact sensor technology.
The TFA Dostmann XENA HOME main display unit placed on a shelf in a living space, demonstrating its compact size and clear display.
lateral view of the external wireless sensor with approximate dimensions: 18cm height, 9cm width, 7cm depth.
Garantia i Suport
This product is manufactured by TFA Dostmann. For support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official TFA Dostmann website. The EU spare parts availability duration for this product is 1 year.