1. Producte acabatview
The OXMART CP-700-2 Hydraulic Hand Pump is an ultra-high pressure manual lifting pump designed for various hydraulic tools. It features a large oil storage capacity and a robust design for heavy-duty applications.
Característiques principals:
- Oil Storage Capacity: 3200CC
- Ultra-high Pressure: Up to 70MPA / 10000psi
- Oil Pipe Length: 2 M / 78.7 polzades
- Estructura compacta: Convenient for portability and space-saving.
- Components duradors: Features a ZG3/8" fast connector, smooth surface, and non-slip comfortable handle.
This pump is ideal for use with hydraulic cylinder jacks, hydraulic punchers, hydraulic flanges, hydraulic crimpers, hydraulic pipe benders, and other hydraulic equipment, ensuring efficient operation and time-saving.
Figure 1: The OXMART CP-700-2 Hydraulic Hand Pump with its hose and handle.
2. Instruccions de configuració
Follow these steps to properly set up your hydraulic hand pump before operation:
- Instal·leu el mànec: Insert the operating handle into its designated slot on the pump body. Ensure it is securely seated.
- Open Dust Covers: Remove the yellow dust cover from the pump's oil outlet and the black dust cover from the ZG3/8" fast female connector on the oil pipe.
- Connect Oil Pipe: Connect the oil pipe's ZG3/8" fast female connector to the pump's oil outlet. Tighten the connection firmly to prevent any oil leakage during operation.
- Connect to Hydraulic Tool: Connect the other end of the oil pipe to your hydraulic tool (e.g., hydraulic cylinder jack). Ensure this connection is also tight and secure.
- Loosen Vent Nut Switch: Locate the vent nut switch on the top of the pump. Loosen it counter-clockwise before use to facilitate the discharge of air and prevent the fuel tank from being sealed.
Figure 2: Labeled components of the hydraulic hand pump, including the anti-slip operating handle, 2m oil hose, oil filler port, pressure relief valve, ZG3/8" female fast connector, and dust-proof cover.
Figure 3: Close-up of the ZG3/8" Fast Female Connector and its protective dust cover, designed for a perfect fit with other hydraulic tools and preventing dust entry.
Figure 4: Detail of the Vent Nut Switch. Remember to loosen it before use and tighten it after working to avoid oil leakage.
Guia de vídeo de configuració:
Video 1: Step-by-step guide on installing the handle and connecting the oil pipe to the OXMART CP-700-2 Hydraulic Hand Pump.
3. Instruccions de funcionament
Once the pump is set up, follow these steps for safe and effective operation:
- Tighten Oil Return Switch: Ensure the oil return switch (pressure relief valve) is tightened clockwise before beginning to pump. This builds pressure in the system.
- Pump the Handle: Press the operating handle repeatedly. This action will raise the piston of the connected hydraulic tool (e.g., a hydraulic jack). Continue pumping until the desired height or pressure is achieved.
- Pressió d'alliberament: To retract the piston of the hydraulic tool, slowly loosen the oil return switch counter-clockwise. The piston will retract itself as the pressure is released.
- Tighten Vent Nut Switch: After completing your work, remember to tighten the vent nut switch clockwise to prevent any oil leakage during storage or transport.
Figure 5: Close-up of the Pressure Relief Valve. Turn clockwise to build pressure (ON) and counter-clockwise to release pressure (OFF).
Guia de vídeo d'operació:
Video 2: Demonstration of operating the hydraulic hand pump to raise and lower a hydraulic jack, including proper use of the oil return switch.
4. Manteniment
Proper maintenance ensures the longevity and optimal performance of your hydraulic hand pump:
- Neteja regular: Keep the pump and all connections clean and free from dirt, dust, and debris. Use a clean cloth to wipe down surfaces.
- Comproveu si hi ha fuites: Periodically inspect all connections and the pump body for any signs of oil leakage. Address any leaks immediately to prevent loss of hydraulic fluid and potential damage.
- Nivell de fluid hidràulic: Check the hydraulic fluid level regularly. If the level is low, refill with the recommended hydraulic oil. Refer to the product specifications for the correct type of oil.
- Emmagatzema correctament: When not in use, store the hydraulic pump in a clean, dry environment, away from extreme temperatures and corrosive substances. Ensure all dust covers are in place.
- Inspeccionar la mànega: Check the oil hose for any kinks, cracks, or damage. Replace the hose if any wear or damage is observed.
5. Solució De Problemes
If you encounter issues with your hydraulic hand pump, consider the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no genera pressió | Oil return switch not tightened; low hydraulic fluid; air in system; internal valve issue. | Tighten oil return switch clockwise; check/refill hydraulic fluid; loosen vent nut to release air; contact support if problem persists. |
| Fuga d'oli | Loose connections; damaged seals/hose; vent nut not tightened after use. | Tighten all connections; inspect and replace damaged seals/hose; tighten vent nut after use. |
| Piston not retracting | Oil return switch not loosened; obstruction. | Loosen oil return switch counter-clockwise; check for any physical obstructions. |
If you are unable to resolve an issue using these steps, please contact OXMART customer support.
6. Especificacions del producte
Detailed specifications for the OXMART CP-700-2 Hydraulic Hand Pump:
- Model: CP-700-2
- Oil Storage Capacity: 3200CC
- Ultra-high Pressure: 70MPA / 10000psi
- Oil Pipe Length: 2 M / 78.7 polzades
- Longitud de la bomba: Aproximadament 30.3 polzades (77 cm)
- Tipus de connector: ZG3/8" Fast Connector
- Dimensions del paquet: 30 x 7.3 x 7.3 polzades
- Pes: 40 lliures
- Fabricant: OXMART
- ASIN: B0CFLN36LH
Figure 6: Visual representation of key product parameters and dimensions.
Figura 7: Examples of wide applications for the hydraulic hand pump in various industries such as power, steel, bridges, shipbuilding, and machinery.
7. Garantia i Suport
Your OXMART CP-700-2 Hydraulic Hand Pump is manufactured by OXMART, a brand committed to high-quality and high-performance products. For detailed warranty information and customer support, please refer to the official documentation or contact the manufacturer directly.
Podeu descarregar un manual d'usuari oficial en format PDF:
Descarrega el Manual d'usuari oficial (PDF)
Per a més ajuda, també podeu visitar el OXMART Store on Amazon.