FOVKSUC Wireless Doorbell Instruction Manual

Introducció

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your FOVKSUC Wireless Doorbell, Model U2-B-1T+2R. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Image: The FOVKSUC Wireless Doorbell kit, featuring two black plug-in receivers and one black wireless push button.

Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• 1 x Transmitter (Wireless Push Button) with pre-installed CR2032 battery
• 2 x Plug-in Receivers (U.S. plug only)
• 1 x Adhesive Tape for mounting
• 1 x tornavís
• 2 x cargols per al muntatge
• 2 x Anchors for mounting
• 1 x Manual d'usuari (aquest document)

Configuració i instal·lació

The FOVKSUC Wireless Doorbell offers two installation methods for the transmitter: adhesive mounting or screw mounting.

Transmitter Installation (Wireless Push Button)

Image: Visual guide for installing the doorbell transmitter using either adhesive tape or screws.

Method 1: Adhesive Mounting

1. Clean the desired mounting surface thoroughly to ensure it is dry and free of dust or grease.
2. Peel off one side of the protective film from the adhesive tape.
3. Attach the adhesive tape firmly to the back of the transmitter.
4. Peel off the remaining protective film from the adhesive tape.
5. Premeu fermament l'emissor sobre la superfície netejada durant almenys 30 segons.

Method 2: Screw Mounting

1. Open the back cover of the transmitter using the provided screwdriver.
2. Position the back cover on the desired mounting surface and mark the screw holes.
3. Drill pilot holes if necessary, and insert the anchors if mounting into drywall or masonry.
4. Secure the back cover to the surface using the provided screws.
5. Attach the transmitter body to the secured back cover.

Receiver Installation (Plug-in Unit)

1. Select a standard U.S. electrical outlet within range of the transmitter.
2. Plug the receiver directly into the electrical outlet. The receiver will power on and be ready for use.
3. Ensure the receiver is not obstructed by large objects or metal surfaces, which could interfere with the wireless signal.

Image: A FOVKSUC doorbell receiver plugged into a standard wall outlet.

Instruccions de funcionament

Selecting a Chime

The doorbell offers 60 selectable melodies. To change the chime:

• Press the "Next Button" on the side of the receiver to cycle through the available melodies.
• Per preview a chime, long-press the "VOL / SETUP Button" for 2 seconds. This will play the prelude of each song, allowing for quick selection.
• The selected chime will be saved automatically, even after a power outage, due to the power-off memory function.

Imatge: Lateral view of the receiver highlighting the "Previous" and "Next" buttons for chime selection.

Ajust de volum

There are 5 adjustable volume levels, ranging from 0dB (mute) to 110dB.

• Press the "VOL / SETUP Button" on the side of the receiver repeatedly to cycle through the 5 volume levels.
• The volume setting will be saved automatically.

Image: Close-up of the receiver's side, indicating the volume/setup button.

Mute Modes

The doorbell offers two mute modes for convenience:

1. Flashing Only Mode: Set the volume to 0dB using the "VOL / SETUP Button". The receiver will flash its LED indicator without producing sound when the doorbell is pressed.
2. Silència temporal: Press the "Mute Button" (center button) on the receiver to temporarily stop the current ringing sound.

Image: A visual representation of the two mute methods, showing a sleeping baby for context.

Funció de memòria d'apagada

The doorbell system retains your last selected chime and volume setting even after a power outage or if the receiver is unplugged. No re-pairing or re-setting is required.

Image: A doorbell receiver plugged into an outlet, with an icon indicating memory retention of settings.

Manteniment

Neteja

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.

Battery Replacement (Transmitter)

The transmitter uses a CR2032 coin cell battery, which has an average life of 3 years (based on 5 presses per day). When the transmitter's LED indicator no longer lights up or the signal range decreases significantly, it's time to replace the battery.

1. Carefully open the back cover of the transmitter using the provided screwdriver or a small flat-head screwdriver.
2. Traieu la bateria CR2032 antiga.
3. Inseriu una nova bateria CR2032 amb el costat positiu (+) cap amunt.
4. Tanqueu la coberta posterior de manera segura.

Image: A CR2032 coin cell battery positioned next to the doorbell transmitter, indicating its power source.

Condicions ambientals

The transmitter is IP55 waterproof and designed for stable operation in temperatures ranging from -4°F to 140°F (-20°C to 60°C). Ensure the transmitter is installed in a location that minimizes direct exposure to extreme weather conditions for optimal longevity, although it is built to withstand them.

Image: The doorbell transmitter shown in rain and snow, emphasizing its IP55 waterproof rating and ability to operate in a wide temperature range.

Resolució de problemes

Especificacions

Imatge: Detallada view of the receiver and transmitter, including dimensions and button functions.

Garantia i Suport

FOVKSUC provides professional after-sales support for its products.

• Garantia: El producte ve amb una garantia de 18 mesos.
• Suport: For any issues during use, please contact FOVKSUC customer service directly through the Amazon platform. A professional customer service team and experts are available to provide pre-sales and after-sales assistance.
• Política de devolució: A 30-day money-back guarantee is offered.

Image: Customer service representatives ready to assist with product inquiries.