Bimar HP129 Electric Column Heater User Manual

1. Introducció

Thank you for choosing the Bimar HP129 Electric Column Heater. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before first use and retain it for future reference. This product is designed for heating indoor domestic environments up to 20 m² and is suitable for properly insulated spaces as a supplementary energy-saving heater.

2. Instruccions de seguretat

Per evitar lesions o danys, observeu sempre les següents precaucions de seguretat:

• Ensure the heater is placed on a stable, level surface to prevent tipping. The appliance includes an anti-tip switch for safety.
• Do not cover the heater or obstruct its air inlets and outlets. Overheating can occur, activating the integrated safety device.
• Keep the heater away from water, moisture, and flammable materials such as curtains, furniture, or paper.
• Do not use the heater in dusty environments or where extremely volatile materials are present.
• Desendolleu sempre l'escalfador abans de netejar-lo o moure'l.
• No introduïu cap objecte a les obertures de l'escalfador.
• Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat. .
• Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.

3. Producte acabatview

The Bimar HP129 is an electric column heater featuring PTC ceramic resistance for efficient heating. It includes an aluminum propeller for effective and quiet ventilation, and a plastic body with an integrated handle for easy transport.

Controls

The heater features two main control dials located on the top panel:

• Power Selector Dial: Controls the operating mode (Off, Fan only, 1000W warm air, 2000W very hot air with oscillation).
• Marcador del termòstat: Ajusta la temperatura ambient desitjada.

4. Configuració

Before initial use, follow these steps:

1. Unpack the heater and place it on a firm, level, and heat-resistant surface.
2. Ensure there is adequate clearance around the heater (at least 50 cm from walls, furniture, and curtains).
3. Plug the heater into a suitable electrical outlet (220-240V ~ 50Hz).
4. Primer ús: Upon first use, operate the heater for at least 10-15 minutes to eliminate the 'new smell'. During this period, ensure the room is well-ventilated.

5. Instruccions de funcionament

Configuració d'energia

Use the Power Selector Dial to choose your desired operating mode:

• Desactivat (0): Apaga la calefacció.
• Fan Only (Fan icon): Activates the fan without heating, providing air circulation.
• Warm Air (1000W): Provides 1000W of heating power.
• Very Hot Air (2000W) with Oscillation: Provides 2000W of heating power and activates the automatic right/left oscillation function for wider heat distribution.

Control del termòstat

The thermostat dial allows you to set the desired room temperature. Turn the dial clockwise to increase the temperature setting and counter-clockwise to decrease it. The heater's PTC technology automatically adjusts power consumption based on the ambient temperature, providing maximum power at low temperatures and reducing it as the room warms up.

The room thermostat regulates the device's operation: it runs continuously until the set temperature is reached, then cycles on and off at intervals to maintain the temperature constant. An indicator light on the control panel illuminates when the heater is actively heating and turns off when the set temperature is reached.

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre escalfador.

Neteja

1. Desendolleu sempre l'escalfador de la presa de corrent i deixeu-lo refredar completament abans de netejar-lo.
2. Netegeu les superfícies exteriors amb un damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing.
3. No submergiu l'escalfador en aigua o cap altre líquid.
4. Periodically clean the air intake and outlet grilles with a soft brush or vacuum cleaner to remove dust and debris.

Emmagatzematge

Quan no l'utilitzeu, guardeu l'escalfador en un lloc fresc i sec, preferiblement en el seu embalatge original, allunyat de la llum solar directa i de la humitat.

7. Solució De Problemes

If you encounter issues with your Bimar HP129 heater, refer to the following common problems and solutions:

• L'escalfador no s'encén:
  • Comproveu si el cable d'alimentació està ben connectat a una presa de corrent que funcioni.
  • Ensure the Power Selector Dial is not set to 'Off' (0).
  • Verify that the anti-tip switch on the base of the heater is engaged (heater is on a flat surface).
• Heater stops operating unexpectedly:
  • The integrated safety device may have activated due to overheating. Unplug the heater, allow it to cool down for at least 30 minutes, and check for any obstructions blocking the air inlets or outlets.
  • If the heater stops after reaching the set temperature and does not restart automatically, try turning it off, waiting approximately 5 minutes, and then turning it back on. If the issue persists, contact customer support.
• Calefacció insuficient:
  • Ensure the thermostat dial is set to a higher temperature than the current room temperature.
  • Check that the Power Selector Dial is set to 1000W or 2000W, not just 'Fan Only'.
  • Confirm the room size is within the recommended 20 m² for effective heating.

For problems not listed here, or if solutions do not resolve the issue, please contact Bimar customer support.

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or spare parts availability, please refer to the documentation provided with your purchase or contact Bimar customer service directly. Contact details can typically be found on the manufacturer's official weblloc web o a l'embalatge del producte.