Moonshan 4 Head Thin Liquid Filling Machine T400V User Manual

1. Introducció

This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Moonshan 4 Head Thin Liquid Filling Machine, model T400V. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury.

Image 1.1: The Moonshan 4 Head Thin Liquid Filling Machine T400V, shown with four bottles being filled simultaneously.

2. Instruccions de seguretat

Always adhere to the following safety guidelines to ensure safe operation and prevent personal injury or damage to the equipment:

• Assegureu-vos que la màquina estigui col·locada sobre una superfície estable i anivellada abans de fer-la funcionar.
• No feu servir la màquina amb les mans mullades ni en ambients humits.
• Always disconnect power before performing any maintenance, cleaning, or assembly tasks.
• Use only liquids that are water-like, particle-free, and non-corrosive. Refer to the 'Applicable Liquids' section for details.
• Mantingueu els nens i el personal no autoritzat lluny de la màquina durant el funcionament.
• Do not attempt to modify the machine or use non-original parts.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling liquids.

3. Producte acabatview

3.1 Característiques clau

• 4 Independent Filling Channels: Allows simultaneous filling of different liquids or volumes.
• Suitable for Thin Liquids: Optimized for water-like, particle-free, and non-corrosive liquids.
• Quick Connection of Tubes: Easy to connect, disconnect, and clean tubing without disassembly.
• 100 Fl Oz/Min Fast Pump: Each channel features a high-speed pump for efficient filling.
• Simple Panel & Clear Display: Intuitive controls for setting parameters directly.

3.2 Applicable Liquids

The Moonshan T400V is designed for rapid filling of low viscosity liquids. It is suitable for:

• Water-like liquids
• Particle-free liquids
• Líquids no corrosius

Examples include wine, juice, glass detergent, micellar water, and similar products. It is no apte for viscous liquids such as lotion, gel, hot sauce, or liquids containing particles like juice with pulp, perfume, essential oil, or olive oil.

Image 3.1: Visual guide indicating suitable liquids (water-like, particle-free, non-corrosive) and unsuitable liquids (viscous or particle-containing).

3.3 Components

The machine consists of the following main components:

• Unitat principal: Houses the control panel and pumps.
• Filling Nozzles (x4): 9mm stainless steel nozzles for liquid dispensing.
• Tubs de silicona: Food-grade, clear, odorless, and chemical-resistant tubes for liquid transfer.
• Mesh Strainers (x4): Located on each inlet tube to prevent foreign matter from entering the pump.
• Tauler de control: Digital display and buttons for setting parameters.
• Interruptor de peu: For manual control of the filling process.

Image 3.2: The four independent filling channels, demonstrating their ability to fill multiple bottles simultaneously.

4. Instruccions de configuració

4.1 Desembalatge

1. Traieu amb cura tots els components de l'embalatge.
2. Verifiqueu que totes les peces que figuren a la llista d'embalatge siguin presents i no estiguin danyades.
3. Conserveu els materials d'embalatge per a futurs emmagatzematges o transports.

4.2 Muntatge

1. Col·loqueu la unitat principal sobre una superfície estable i plana.
2. Attach the nozzle support bar to the main unit, ensuring it is securely fastened.
3. Connect the silicone inlet tubes to the 'Input' ports on the machine. Ensure each tube has its mesh strainer submerged in the liquid source.
4. Connect the silicone outlet tubes to the filling nozzles. The quick-connect design allows for easy attachment and removal.
5. Position the nozzles above the bottles or containers to be filled. Adjust the height and spacing as needed.

Image 4.1: Illustration of the quick connection mechanism for the tubes, highlighting ease of installation, removal, and cleaning.

4.3 Connexió d'alimentació

1. Ensure the power switch on the machine is in the 'OFF' position.
2. Connecteu el cable d'alimentació a la màquina i després a una presa de corrent amb connexió a terra.
3. Connect the foot switch cable to its designated port on the machine.

5. Instruccions de funcionament

5.1 Tauler de control acabatview

The control panel allows for precise adjustment of filling parameters for each of the four pumps.

Image 5.1: The machine's control panel, featuring independent speed adjustments for each pump, filling time settings, delay time, and a bottle counter.

• PUMP 1-4 ON/OFF: Individual switches to activate or deactivate each pump.
• Velocitat +/-: Adjusts the filling speed for each individual pump (0-99).
• A poc a poc: Momentarily activates the pump for quick cleaning or priming.
• Filling Time: Sets the duration for which the liquid is dispensed (e.g., 13.45 seconds).
• Delay Time (T1, T2, T3): Configures delays for water outlet, conveyor belt, and air valve (if applicable).
• counter: Displays the number of bottles filled. Can be reset.
• MOVE / UNIT/ADD: Buttons for navigating and adjusting settings.

5.2 Setting Filling Parameters

1. Enceneu l'interruptor principal.
2. Set Filling Time: Use the 'MOVE' and 'UNIT/ADD' buttons to adjust the desired filling time on the 'Filling Time' display. This determines the volume dispensed.
3. Adjust Pump Speed: For each active pump (PUMP 1-4), use the corresponding 'Speed +' or 'Speed -' buttons to set the desired flow rate. Start with a lower speed and gradually increase.
4. Estableix el temps de retard (opcional): If using a conveyor or requiring specific delays, adjust T1, T2, T3 as needed.
5. Test Fill: Place an empty container under a nozzle and perform a test fill to verify the volume and speed. Adjust parameters until the desired fill is achieved.

5.3 Filling Process

1. Ensure all settings are correctly configured and containers are in place.
2. Activate the desired pumps using their individual 'ON/OFF' switches.
3. Press the foot switch to initiate the filling cycle. The machine will dispense liquid for the set 'Filling Time'.
4. Release the foot switch to stop filling. For continuous operation, some models may have an auto mode.
5. The 'Counter' will increment after each successful fill cycle.

Image 5.2: The foot switch, used to trigger the filling process, enhancing operational efficiency.

5.4 Automatic Bottle Counting

The integrated counter automatically tracks the number of bottles filled. This feature helps monitor production output. To reset the counter, long-press the counter button as indicated on the control panel.

Image 5.3: A close-up of the digital counter display, showing the number of filled bottles and instructions for resetting.

5.5 Optional Conveyor System

For enhanced automation, an optional conveyor belt system can be integrated with the filling machine. This allows for continuous bottle movement and filling. The machine's control panel includes a knob for step-less speed adjustment of a matching conveyor belt, effective when connected.

Image 5.4: The 4-head filling machine integrated with an optional conveyor system, demonstrating automated bottle handling.

6. Manteniment

6.1 Neteja

Regular cleaning is essential for hygiene and to prolong the life of the machine. Always disconnect power before cleaning.

1. Tube and Nozzle Cleaning: Disconnect the silicone tubes and nozzles. Rinse them thoroughly with clean water or an appropriate cleaning solution, especially after filling different liquids. The 'Inching' button on the control panel can be used to flush the pumps with cleaning solution.
2. Machine Surface: Netegeu l'exterior de la màquina amb un anunciamp cloth. Avoid using abrasive cleaners or submerging the main unit in water.
3. Mesh Strainers: Periodically inspect and clean the mesh strainers to ensure they are free of debris.

Image 6.1: The 'Inching' button, which allows for quick, momentary activation of each pump for cleaning or priming purposes.

6.2 Emmagatzematge

When not in use for extended periods, clean the machine thoroughly, disconnect it from power, and store it in a dry, dust-free environment.

7. Solució De Problemes

Consulteu la taula següent per veure els problemes habituals i les seves possibles solucions:

8. Especificacions

The following are the technical specifications for the Moonshan 4 Head Thin Liquid Filling Machine T400V:

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the contact details provided at the point of purchase or visit the official Moonshan weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.