DAKASON P4-54A-50

DAKASON 4FT Vapor Tight LED Light with Motion Sensor

Model: P4-54A-50

1. Introducció

Thank you for choosing the DAKASON 4FT Vapor Tight LED Light with Motion Sensor. This fixture is designed for durability and efficiency in challenging environments. It features adjustable wattage, an IP65 waterproof rating, and integrated motion and daylight sensors for optimized energy consumption.

This manual provides essential information for the safe installation, operation, and maintenance of your LED light fixture. Please read it thoroughly before installation and keep it for future reference.

2. Informació de seguretat

  • ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació abans de la instal·lació o el manteniment.
  • La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
  • Assegureu-vos el subministrament voltage is compatible with the fixture's requirements (100-277V AC).
  • Do not handle live wires. Always use appropriate personal protective equipment.
  • No modifiqueu l'aparell ni l'utilitzeu per a finalitats diferents de les previstes.
  • Mantingueu els materials inflamables allunyats de l'aparell durant el funcionament.
  • This fixture is rated IP65 for dust and water jet protection. Ensure all connections are properly sealed during installation to maintain this rating.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació.

  • 1 x DAKASON 4FT Vapor Tight LED Light Fixture
  • 2 x V-hooks
  • 2 x Brackets de muntatge
  • 4 x Plastic Wall Plugs
  • 4 x cargols
  • 4 x juntes
Image showing all included mounting hardware: V-hooks, mounting brackets, plastic wall plugs, screws, and gaskets.

Figure 3.1: Included Mounting Kit and Components

4. Especificacions

Marca DAKASON
Nom del model Llum LED estanca al vapor
Número de model P4-54A-50
Mida 4FT (47.2 inches)
Wattage Adjustable: 40W / 50W / 60W
Brillantor Fins a 6600 lúmens (a 60 W)
Eficiència 110 lúmens per watt
Voltage 100-277V AC
Temperatura de color 5000 Kelvin (blanc fred)
Classificació IP IP65 (Waterproof, Dust-tight)
Material Polycarbonate (PC) housing and lens
Característiques especials Dimmable, Motion Sensor, Photocell (Daylight Sensor), Wattage Ajustable
Tipus de muntatge Ceiling Mount / Wall Mount (Surface Mount)
Certificacions Llistat UL
Vida útil 50,000 hores
Dimensions del producte 47.2 cm de llargada x 3.74 cm d'amplada x 3.38 cm d'alçada
Pes de l'article 4.74 lliures

5. Configuració i instal·lació

Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for surface mounting on ceilings or walls.

5.1. Muntatge del dispositiu

  1. Prepareu la superfície de muntatge: Choose a suitable location for the fixture. Mark the drilling points for the mounting brackets using the fixture as a guide.
  2. Instal·leu els suports de muntatge: Drill pilot holes at the marked locations. Insert the plastic wall plugs (if needed for drywall/masonry) and secure the mounting brackets to the surface using the provided screws. Ensure the brackets are firmly attached.
  3. Assegureu el dispositiu: Carefully align the fixture with the installed mounting brackets and secure it in place. The fixture can be clipped into the brackets.
Diagram showing the components of the vapor tight light fixture including stainless steel clips, mounting bracket, waterproof cable gland, reliable driver, and PC lens & housing.

Figure 5.1: Fixture Components and Mounting Points

A person installing the DAKASON LED light fixture in a garage, with the mounting brackets and screws visible.

Figura 5.2: Example of Fixture Installation

5.2. Cablejat elèctric

Ensure power is OFF before wiring. The fixture is designed for 100-277V AC input. Connect the supply wires to the fixture's internal wiring terminals:

  • Connecteu el En directe (negre) wire from the power supply to the fixture's Live terminal.
  • Connecteu el Neutre (blanc) wire from the power supply to the fixture's Neutral terminal.
  • Connecteu el Ground (Green/Bare Copper) wire from the power supply to the fixture's Ground terminal.

Use the waterproof cable gland to ensure a sealed entry point for the wiring, maintaining the IP65 rating.

Close-up of the LED driver inside the fixture, showing input and output wiring terminals.

Figure 5.3: Internal Wiring and Driver

6. Funcionament i configuració

The DAKASON LED Vapor Tight Light features adjustable wattage and intelligent sensor controls. These settings are configured using dip switches located inside the fixture.

6.1. Wattage Ajust

The fixture allows you to select between three wattage outputs: 40W, 50W, and 60W. This adjusts the light output (lumens) accordingly.

  • 40 W: Aproximadament 4400 lúmens
  • 50 W: Aproximadament 5500 lúmens
  • 60 W: Aproximadament 6600 lúmens

Per ajustar el wattage, localitza el wattage selection switch inside the fixture and set it to your desired output. Ensure power is disconnected before making adjustments.

Image showing a workshop setting with three different light levels corresponding to 40W, 50W, and 60W, and a close-up of the wattage interruptor de selecció.

Figura 6.1: Wattage Options and Selection

6.2. Configuració del sensor de moviment

The integrated motion sensor allows for automatic lighting control based on presence. Settings are configured via dip switches.

Close-up of the dip switch panel for motion sensor settings, showing options for sensitivity, hold time, daylight sensor, stand-by period, stand-by dimming level, and sensor mode.

Figure 6.2: Motion Sensor Dip Switch Panel

Refer to the diagram on the fixture's sensor module for specific dip switch positions. Key settings include:

  • Sensibilitat de detecció: Adjusts how easily the sensor detects motion (e.g., 50% or 100%).
  • Temps de retenció: The duration the light stays at 100% brightness after motion is detected and then ceases (e.g., 5s, 90s, 5min, 10min).
  • Període d'espera: The duration the light remains at a dimmed level after the hold time expires and before turning completely off (e.g., 0s, 10s, 15min, +∞ for always on at dim level).
  • Nivell d'atenuació en espera: The brightness level during the stand-by period (e.g., 20% or 30%).
  • Mode de sensor: Allows enabling or disabling the motion sensor function entirely.

Example of Motion Sensor Logic:

Six-panel diagram illustrating the motion sensor's behavior at a train station: light off with sufficient daylight, dims to 20% with low ambient light, 100% with motion, stays on for hold time, dims to standby, then off when ambient light is high.

Figure 6.3: Motion Sensor Operation Flow

6.3. Daylight Sensor (Photocell)

The daylight sensor (photocell) automatically controls the light based on ambient light levels, saving energy during daylight hours.

  • Daylight Priority Technology: The sensor will turn on the light fixture when ambient light is below 50 Lux (dusk), even without motion.
  • When ambient light is above 50 Lux (dawn), the sensor will switch off the light fixture, even if motion is detected.
  • The daylight sensor function can be disabled via a dip switch if not required.
Image showing a building exterior at dusk and dawn, illustrating how the daylight sensor automatically turns the lights on when ambient light is low and off when it's high.

Figure 6.4: Daylight Sensor Auto On/Off

7. Manteniment

The DAKASON LED Vapor Tight Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

  • Neteja: Desconnecteu l'alimentació abans de netejar. Netegeu l'aparell amb un drap suau i sec.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens.
  • Inspecció: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the stainless-steel hasps and clips are securely fastened to maintain the vapor-tight seal.
  • LED: The LEDs are maintenance-free and have a lifespan of 50,000 hours. They are not user-replaceable.

8. Solució De Problemes

If you encounter issues with your DAKASON LED Vapor Tight Light, refer to the following common problems and solutions:

Problema Causa possible Solució
La llum no s’encén. No power supply; incorrect wiring; sensor disabled or misconfigured; ambient light too high. Check circuit breaker and wiring connections. Verify sensor settings (Daylight Sensor, Sensor Mode). Ensure ambient light is below 50 Lux if Daylight Sensor is enabled.
Light stays on continuously or for too long. Motion sensor Hold Time or Stand-by Period set too long or to infinite (+∞); constant motion in detection area; sensor malfunction. Adjust Hold Time and Stand-by Period dip switches. Ensure no continuous motion is triggering the sensor. If issue persists, contact support.
Light turns on/off too frequently or is too sensitive. Motion sensor sensitivity set too high; environmental factors (e.g., small animals, moving objects, vibrations). Reduce the Detection Sensitivity setting on the dip switch. Consider the mounting location to minimize false triggers.
La llum parpelleja. Incompatible dimmer switch (this fixture is not designed for external dimmers); power supply instability; rare individual sensitivity to LED refresh rates. Ensure no external dimmer switches are used. Check power supply stability. While most users do not perceive flicker, some individuals may be more sensitive to the inherent refresh rate of LED lighting.
La llum no és prou brillant. Wattage setting is too low; Stand-by Dimming Level is active. Ajusteu el wattage selection switch to a higher setting (e.g., 60W). Check motion sensor settings to ensure the light is not in a dimmed stand-by state.

9. Garantia i Suport

The DAKASON LED Vapor Tight Light is backed by a 5 any de garantia, ensuring its quality and performance. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact DAKASON customer support. Provide your purchase details and model number (P4-54A-50) when contacting support to expedite assistance.

You can typically find contact information for the seller or manufacturer through your purchase platform or the DAKASON official weblloc.

© 2023 DAKASON. All rights reserved.

Aquest manual està subjecte a canvis sense previ avís.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.