Anmytek H0103
Anmytek H0103 Modern 2-Drawer Nightstand Instruction Manual
Model: H0103 | Brand: Anmytek
Introducció
Thank you for choosing the Anmytek H0103 Modern 2-Drawer Nightstand. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image: The Anmytek H0103 Modern 2-Drawer Nightstand, featuring a natural oak finish and gold-colored legs, positioned next to a sofa with decorative items on top.
Informació de seguretat
- Always assemble the nightstand on a soft, clean surface to prevent scratches.
- Assegureu-vos que tots els elements de fixació estiguin ben ajustats abans d'utilitzar-los. Comproveu-los i torneu-los a ajustar periòdicament si cal.
- Do not exceed the maximum weight recommendation of 40 pounds for the top surface.
- Mantingueu les peces petites i els materials d'embalatge fora de l'abast dels nens durant el muntatge.
- Eviteu col·locar objectes calents directament sobre la superfície; utilitzeu posagots o coixinets protectors.
- Aquest moble està dissenyat només per a ús interior.
Llista de peces
Before assembly, verify that all components and hardware are present. If any parts are missing or damaged, please contact customer support.
- Panell superior
- Panell inferior
- Panells laterals (2)
- panell posterior
- Tauler de la prestatgeria
- Frontals de calaix (2)
- Drawer Sides (4 sets)
- Drawer Backs (2)
- Drawer Bottoms (2)
- Metal Legs (4)
- Tiradors de calaix (2)
- Hardware Pack (screws, cam locks, dowels, drawer slides, etc.)
Instruccions de muntatge
Follow these steps carefully to assemble your Anmytek H0103 Nightstand. It is recommended to have two people for assembly.
- Prepara l'espai de treball: Clear a spacious area and lay out all parts on a soft, protective surface to prevent damage.
- Fixeu les guies del calaix als panells laterals: Secure the drawer slides to the inner sides of the side panels using the provided screws. Ensure they are correctly oriented.
- Muntar el marc principal: Connect the side panels to the bottom panel and the shelf panel using dowels and cam locks. Ensure the open compartment is correctly positioned.
- Connecteu el panell superior: Secure the top panel to the assembled frame using dowels and cam locks.
- Instal·leu el panell posterior: Fasten the back panel to the rear of the nightstand frame using small nails or screws.
- Munta els calaixos: For each drawer, connect the drawer sides, back, and front panel. Slide the drawer bottom into the grooves. Attach the remaining drawer slide components to the drawer sides.
- Fixeu els tiradors dels calaixos: Secure the handles to the front of each drawer.
- Inserir calaixos: Carefully slide the assembled drawers into the nightstand frame, aligning the drawer slides.
- Col·loca les cames: Secure the four metal legs to the bottom panel of the nightstand using the provided screws.
- Comprovació final: Verify that all connections are tight and the nightstand is stable.
Image: The assembled Anmytek H0103 Nightstand placed beside a bed, showcasing its open compartment and two drawers, with a lamp i llibres a sobre.
Instruccions d'ús
The Anmytek H0103 Nightstand is designed for versatile storage and display.
- Compartiment obert: Use the open shelf for displaying decorative items, books, or for easy access to frequently used items.
- Calaixos: The two drawers provide enclosed storage for personal items, keeping your space tidy. The smooth slides ensure effortless opening and closing.
- Capacitat de pes: The top surface has a maximum weight recommendation of 40 pounds. Distribute weight evenly to maintain stability.
- Col·locació: This nightstand functions effectively as a bedside table in bedrooms or as an end table in living rooms.
Image: The Anmytek H0103 Nightstand with both drawers partially open, revealing the interior storage capacity, suitable for various personal items.
Cura i Manteniment
Proper care will help maintain the appearance and longevity of your nightstand.
- Neteja: Wipe the surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
- Vessaments: Immediately wipe up any spills with a dry cloth to prevent staining or water damage.
- Llum solar: Eviteu l'exposició prolongada a la llum solar directa, que pot causar decoloració o esvaïment.
- Calor: Do not place hot items directly on the surface. Use protective pads or coasters.
- Comprovació d'estabilitat: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La tauleta de nit està trontollant. | Connexions soltes o terra irregular. | Ensure all screws and cam locks are fully tightened. Adjust leg levelers if present, or place shims under legs on uneven surfaces. |
| Els calaixos no llisquen suaument. | Les guies dels calaixos estan desalineades o obstruïdes. | Remove the drawer and check that the slides are properly installed and aligned on both the drawer and the nightstand frame. Ensure no debris is obstructing the slides. |
| El calaix no es tanca completament. | Obstruction inside the drawer or misaligned drawer front. | Check for items blocking the drawer's path. Verify that the drawer front is securely attached and not crooked. Re-check drawer slide alignment. |
| Surface damage (scratches, dents). | Impacte durant el muntatge o l'ús. | Minor scratches can sometimes be touched up with furniture repair pens. For deeper damage, contact customer support for advice. |
Especificacions
Image: Detailed diagram illustrating the dimensions of the Anmytek H0103 Nightstand, including overall width, depth, height, and internal drawer measurements.
- Marca: Anmytek
- Número de model: H0103-2 Drawer
- Dimensions totals (L x P x A): 19.8" x 15.7" x 23.7" (50.2 cm x 40 cm x 60.2 cm)
- Drawer Interior Dimensions (W x D x H): 16.5" x 11.2" x 4.9" (42 cm x 28.5 cm x 12.5 cm)
- Open Compartment Dimensions (W x D x H): Aproximadament 47 cm x 37 cm x 13.3 cm
- Material: Engineered Wood (PB material)
- Tipus de material del marc: Fusta d'enginyeria
- Tipus de material superior: Fusta d'enginyeria
- Material base: Fusta d'enginyeria
- Estil de cames: Cama recta
- Nombre de calaixos: 2
- Maximum Weight Recommendation (Top Surface): 40 lliures
- Pes de l'article: 33 lliures
- Color: Oak-2 Drawer (Natural Oak finish with herringbone texture)
- Color del mànec: Or
- Color base: Or
- Ús interior/exterior: Interior
- Instruccions de cura del producte: Netegeu amb un drap sec
Garantia i Suport
This Anmytek product comes with a Garantia limitada. For specific warranty details, claims, or technical support, please contact Anmytek customer service through the retailer where the product was purchased or visit the official Anmytek weblloc.
When contacting support, please have your model number (H0103) and purchase information readily available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.