Alphacool 17628 - 45 Degree Double Rotary Angled Adapter G1/4 AG to G1/4 IG - White Water Cooling Instruction Manual

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your Alphacool 17628 45 Degree Double Rotary Angled Adapter. Please read these instructions carefully before use to ensure optimal performance and longevity of your water cooling system components.

Producte acabatview

The Alphacool 17628 is a high-quality brass fitting designed for water cooling systems. It features a 45-degree double rotary design, allowing for flexible tubing routing in compact spaces. The adapter has G1/4" AG (male) to G1/4" IG (female) threads, suitable for 8/5 mm thick tubing. It is optimized for use in server and workstation systems where precise and reliable connections are crucial.

Imatge: Frontal view of the Alphacool 45 Degree Double Rotary Angled Adapter, showing the G1/4 AG thread and the white finish.

Informació de seguretat

• Ensure all components are compatible before installation.
• Always turn off and unplug your computer system before installing or removing any water cooling components.
• Handle fittings with care to avoid damaging threads or O-rings.
• Perform a leak test on your water cooling loop before powering on your system.

Configuració i instal·lació

1. Preparació: Ensure your water cooling loop is drained and all components are clean.
2. Thread Inspection: Carefully inspect the G1/4" threads on both the adapter and the component you intend to connect (e.g., radiator, pump, water block) for any damage or debris.
3. O-Ring Check: Verify that the O-rings on the adapter are properly seated and free from damage. These are crucial for a watertight seal.
4. Connexió: Screw the G1/4" AG (male) end of the adapter into the corresponding G1/4" IG (female) port on your water cooling component. Hand-tighten until snug. Do not overtighten, as this can damage the threads or O-rings.
5. Connexió de tubs: If connecting tubing directly to the G1/4" IG (female) end of the adapter, ensure you use a compatible G1/4" male fitting for your tubing size (e.g., compression fitting for 8/5 mm tubing).
6. Posicionament: Utilize the double rotary feature to adjust the angle of the adapter to achieve the desired tubing path.
7. Prova de fuites: After assembling your entire water cooling loop, perform a thorough leak test for at least 24 hours using a leak tester or by filling the loop with distilled water and running the pump without powering on other system components.

Imatge: Lateral view of the Alphacool 45 Degree Double Rotary Angled Adapter, highlighting the rotary joints for flexible positioning.

Pautes de funcionament

Once installed and leak-tested, the adapter operates passively as part of your water cooling loop. No specific operational steps are required for the adapter itself beyond ensuring it remains securely connected and free from leaks.

• Coolant Compatibility: Use only clear and transparent water cooling liquids.
• Avoid Pastel Coolants: Particles and additives found in pastel or opaque coolants can clog and permanently damage water cooling components, including this adapter, radiators, pumps, and tubing. This can lead to system failure and may void the manufacturer's warranty.

Manteniment

Regular maintenance of your water cooling system helps ensure optimal performance and longevity of all components, including the Alphacool 45 Degree Double Rotary Angled Adapter.

• Substitució del refrigerant: Replace your water cooling liquid every 6-12 months, or as recommended by your coolant manufacturer.
• Buidat del sistema: When replacing coolant, it is recommended to flush the entire system with distilled water to remove any accumulated debris or old coolant residue.
• Inspecció: Periodically inspect the adapter for any signs of wear, corrosion, or leaks, especially around the O-rings and rotary joints.
• Neteja: If necessary, carefully clean the exterior of the adapter with a soft, damp tela. No utilitzeu productes químics o materials abrasius.

Resolució de problemes

Especificacions

Imatge: View of the Alphacool 45 Degree Double Rotary Angled Adapter, showing the G1/4 AG (male) and G1/4 IG (female) ends.

Garantia i Suport

This Alphacool product is covered by the manufacturer's warranty. Please refer to the official Alphacool website or your point of purchase for detailed warranty terms and conditions. Using non-transparent or pastel coolants may void your warranty due to potential damage to the product.

For technical support or further inquiries, please visit the official Alphacool support page or contact their customer service. Keep your proof of purchase for warranty claims.

Official Alphacool Weblloc: www.alphacool.com