HPBS H5000 Car Jump Starter User Manual

1. Introducció i presentació del producteview

The HPBS H5000 Car Jump Starter is a powerful and portable device designed to jump-start 12V vehicles with up to all gas or 10.0L diesel engines. Featuring a 5000A peak current, it can provide up to 80 jump starts on a single full charge. This versatile unit also functions as an 88.8 Wh portable power bank for charging various electronic devices and includes a multi-mode LED flashlight for emergencies.

Image 1.1: The HPBS H5000 Car Jump Starter, a compact and powerful device for vehicle emergencies.

2. Què hi ha a la caixa

En obrir el paquet, comproveu que hi hagi tots els elements següents:

• HPBS 5000A Jump Starter (x1)
• Smart Jumper Cables (x1)
• USB Type-C Cable (x1)
• Cigarette Lighter Adapter (x1)
• EVA Storage Case (x1)
• Manual d'usuari (x1)

Image 2.1: All components included in the HPBS H5000 Jump Starter package.

3. Característiques del producte

The HPBS H5000 Jump Starter is equipped with several features for optimal performance and user convenience:

• Corrent màxima alta: Delivers 5000A peak current, capable of jump-starting all gas engines and diesel engines up to 10.0L.
• Banc d'energia portàtil: Integrated 88.8 Wh capacity power bank with USB 5V 2.4A and Quick Charge (5V/9V/12V) outputs for charging mobile devices.
• Proteccions de seguretat avançades: Features 10 intelligent safety protections including spark resistance, over-charge, over-current, short-circuit, over-heat, extreme temperature, over-voltage, reverse connection, and reverse polarity protection.
• 3.0" LCD Display: Provides clear, real-time information on battery status and operational modes.
• Multi-Mode LED Flashlight: Built-in flashlight with Normal, SOS, and Strobe modes for illumination and emergency signaling.
• Temps d'espera llarg: Can hold its charge for approximately 24 months when not in use.
• 160W Max DC Output: Capable of powering 12V devices such as vacuum cleaners or air compressors.

Image 3.1: The HPBS H5000 features a Smart BMS System with 10 built-in protections for safe operation.

Image 3.2: The HPBS H5000 functions as a versatile power bank for charging smartphones, tablets, and other electronics.

4. Informació de seguretat

Please read and understand all safety warnings before using the HPBS H5000 Jump Starter. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• No desmunteu la unitat.
• No exposeu la unitat a la pluja ni a la humitat extrema.
• No submergiu la unitat a l'aigua.
• No feu funcionar la unitat si ha estat danyada.
• Mantenir fora de l'abast dels nens.
• Assegureu-vos una ventilació adequada durant l'ús i la càrrega.
• Connect the jumper cables in the correct polarity (red to positive, black to negative).
• Eviteu curtcircuitar el cl del pontamps.
• No engegueu una bateria congelada.
• Always remove the jumper cables from the jump starter unit first after a successful jump start, then from the vehicle battery.

5. Configuració i càrrega inicial

Before first use, it is recommended to fully charge the HPBS H5000 Jump Starter.

5.1 Càrrega de l'arrencador de bateria

1. Locate the USB Type-C input port on the side of the jump starter.
2. Connect the provided USB Type-C cable to the input port.
3. Connect the other end of the USB Type-C cable to a USB wall adapter (not included) or a powered USB port.
4. The LCD display will show the charging progress. Charge until the display indicates 100%.

5.2 Identificació de components

Familiarize yourself with the ports and buttons on the device:

• Port de sortida EC5: Per connectar els cables de pont intel·ligents.
• Botó ON/OFF: Encén/apaga la unitat i controla els modes de llanterna.
• Llanterna LED: Font de llum integrada.
• USB Output 1 (QC 3.0): Per a dispositius compatibles amb càrrega ràpida.
• Entrada USB-C: Per carregar l'arrencador de bateria.
• Sortida de CC (12V/10A): Per alimentar accessoris de 12V.
• USB Output 2 (5V/2.4A): Sortida USB estàndard per a dispositius de càrrega.
• Llums indicadores: (If applicable, usually part of LCD or separate LEDs)

Imatge 5.1: Detallada view of the HPBS H5000's ports and controls.

6. Instruccions de funcionament

6.1 Arrencada amb salt d'un vehicle

Ensure the jump starter is sufficiently charged (preferably above 50%) before attempting a jump start.

1. Connecteu els cables de connexió: Insert the blue end of the smart jumper cables into the EC5 output port on the jump starter. Ensure it is fully seated.
2. Connectar a la bateria: Connecteu el cl vermellamp al terminal positiu (+) de la bateria del vehicle i al cl negreamp al terminal negatiu (-).
3. Indicador de comprovació: Observe the indicator on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If a red light or alarm sounds, check connections and polarity.
4. Inici del vehicle: Return to the vehicle and start the engine.
5. Treure els cables: Once the engine starts, immediately remove the smart jumper cables from the jump starter unit first, then disconnect the clamps de la bateria del vehicle.

Image 6.1: Step-by-step guide for jump starting your vehicle using the HPBS H5000.

6.2 Ús com a bateria externa

The HPBS H5000 can charge various USB-powered devices.

1. Connect your device's USB charging cable to either USB Output 1 (QC 3.0) or USB Output 2 (5V/2.4A) on the jump starter.
2. The jump starter will automatically begin charging your device. The LCD display may show 'OUT' indicating power output.

6.3 Ús de la llanterna LED

The built-in LED flashlight has three modes: Normal, SOS, and Strobe.

1. Activar/Desactivar: Long press the ON/OFF button to turn the flashlight on or off.
2. Canvi de modes: With the flashlight on, short press the ON/OFF button to cycle through Normal, SOS, and Strobe modes.

Image 6.2: The HPBS H5000's bright LED light offers Normal, Strobe, and SOS modes for various situations.

7. Solució De Problemes

If you encounter issues with your HPBS H5000 Jump Starter, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact HPBS customer service.

8. Especificacions

9. Manteniment

Un manteniment adequat garanteix la longevitat i el rendiment òptim del vostre arrencador.

• Recarrega regularment: Even when not in use, it is recommended to recharge the jump starter every 3-6 months to maintain battery health and ensure it's ready for emergencies. The device can hold power for about 24 months, but regular top-ups are beneficial.
• Emmagatzematge: Store the unit in a cool, dry place away from direct sunlight, heat sources, and moisture. Use the provided EVA storage case for protection.
• Neteja: Netegeu la unitat amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
• Cura del cable: Inspeccioneu els cables de pont i el clamps for any damage before each use. Ensure clamps estan nets i lliures de corrosió.

Image 9.1: The HPBS H5000 is designed for long-term standby, retaining charge for up to 24 months.

10. Garantia i atenció al client

HPBS is committed to product quality and customer satisfaction.

• Garantia de la qualitat del producte: HPBS supports 2 years of product quality assurance from the date of purchase.
• Atenció al client: For any questions, concerns, or assistance with your HPBS jump starter battery pack, please do not hesitate to contact our customer service team. We offer 7x24h customer support.

Please refer to the contact information provided on the product packaging or the official HPBS weblloc web per als canals de suport més actuals.