EENOUR Auto Tumbler Heat Press Machine (Model CH2304) Instruction Manual

Introducció

This manual provides detailed instructions for the safe and efficient operation of your EENOUR Auto Tumbler Heat Press Machine, Model CH2304. Please read this manual thoroughly before use and retain it for future reference.

Què hi ha a la caixa

Upon unpacking, ensure all items listed below are present:

• EENOUR Automatic Tumbler Heat Press Machine
• Cable d'alimentació
• Manual d'usuari (aquest document)
• 2 Spare Fuses
• 1 parell de guants resistents a la calor
• 1 Roll of Heat Tape

Image: The EENOUR Auto Tumbler Heat Press Machine shown with its accessories, including heat-resistant gloves, heat tape, and the power cord.

Instruccions de seguretat

• Always connect the machine directly to a wall outlet or an industrial-grade extension cord.
• Do not operate the machine without a tumbler or mug inserted when heating to prevent damage to the heating element.
• Use the provided heat-resistant gloves when handling hot items.
• Familiarize yourself with the emergency stop feature to immediately halt operation if needed.
• Mantenir allunyat de nens i animals de companyia.

Configuració

1. Col·locació: Col·loqueu la premsa de calor sobre una superfície estable i resistent a la calor.
2. Connexió d'alimentació: Connect the power cord to the machine's power inlet and then to a suitable power outlet.
3. Encès: Flip the red power switch located on the side of the machine to the 'ON' position. The digital display will illuminate.
4. Initial Preheating: It is recommended to insert a blank tumbler or mug into the press during initial preheating to help stabilize the heating element.

Instruccions de funcionament

Tauler de control acabatview

The control panel features a digital display and several buttons for setting temperature, time, and pressure. It also includes four memory modes for quick access to common settings.

Image: Close-up of the control panel showing temperature, time, and counter displays, along with mode selection buttons (1-4), SET, UP, DOWN, and ENTER buttons.

Setting Temperature, Time, and Pressure

1. Seleccioneu el mode: Press buttons 1-4 to select a preset mode. Modes 1-3 include auto-rotation, while Mode 4 is for mugs without auto-rotation.
2. Ajustar la temperatura: Press the "SET" button once. The temperature display will flash. Use the "UP" and "DOWN" arrows to adjust the temperature (0-410°F). Press "SET" again to confirm.
3. Adjust First Timer: After setting temperature, press "SET" again. The first timer display will flash. Use "UP" and "DOWN" arrows to adjust the time (0-399s). Press "SET" again to confirm.
4. Adjust Second Timer (for auto-rotation modes): For Modes 1-3, press "SET" again. The second timer display will flash. Adjust the time for the second press after rotation. Press "SET" again to confirm.
5. Ajust de pressió: Press "SET" again. The pressure value ("dn") will flash. Use "UP" and "DOWN" arrows to adjust the pressure digitally. Refer to the "Printing Parameters Reference" table for recommended pressure values based on diameter. Press "SET" again to save all settings for the selected mode.

Image: Illustration showing the digital display for pressure value setting, indicating that a larger "dn" value corresponds to greater pressure.

Using for Straight Tumblers & Glasses (Modes 1-3)

For straight tumblers and glasses, use Modes 1, 2, or 3, which feature automatic rotation for a seamless full print.

1. Prepare your tumbler with sublimation print and secure it with heat tape.
2. Select Mode 1, 2, or 3 and set your desired temperature, time, and pressure.
3. Wait for the machine to reach the set temperature.
4. Carefully insert the prepared tumbler into the heating element.
5. Press the "START" button. The machine will automatically press, rotate, and press again according to your settings.
6. Once complete, an alarm will sound, and the machine will release the tumbler. Remove the hot tumbler using heat-resistant gloves.

Image: Diagram illustrating the auto-rotation feature of the heat press, showing a tumbler rotating 100 degrees for full sublimation.

Using for Mugs with Handles (Mode 4)

For mugs with handles, use Mode 4, which operates without auto-rotation to accommodate the handle.

1. Prepare your mug with sublimation print and secure it with heat tape.
2. Select Mode 4 and set your desired temperature, time, and pressure.
3. Wait for the machine to reach the set temperature.
4. Carefully insert the prepared mug into the heating element, ensuring the handle is positioned outside the pressing area.
5. Press the "START" button. The machine will automatically press according to your settings.
6. Once complete, an alarm will sound, and the machine will release the mug. Remove the hot mug using heat-resistant gloves.

Image: Visual guide for using the heat press with mugs, showing the mug being inserted and pressed without rotation.

Parada d'emergència

The machine is equipped with an emergency "STOP" button. Pressing this button will instantly halt the pressing action. Press it again to release the heat press. This feature helps prevent burns or damage to items.

Image: A hand pressing the "STOP" button on the control panel, illustrating the quick emergency stop feature for safe operation.

Referència de paràmetres d'impressió

The following table provides recommended settings. Adjustments may be necessary based on material and transfer thickness. Always test with a sampel primer.

Pressure Value Reference (DN)

Note: As the material and thickness of the transfer are different, the set temperature and time should also be different. Please take a sample to test for a great temperature, time, and pressure first to avoid mistakes and loss in subsequent mass production.

Manteniment

• Neteja: Ensure the machine is unplugged and cooled before cleaning. Wipe down the exterior with a soft, damp tela.
• Substitució de fusibles: If the machine loses power, check the fuse located on the side panel. Replace with one of the provided spare fuses if necessary.
• Element de calefacció: The heating element is designed for durability with 3 layers of thickened silicone protection. If replacement is ever needed, consult EENOUR customer support.

Resolució de problemes

• Uneven Press/Ghosting: Ensure the pressure setting is appropriate for the diameter of your item. The machine supports pressure value settings for cups in the diameter range of 2.75-3.45 inches. A stable and suitable pressure is crucial for even sublimation results.
• La màquina no s'escalfa: Check the power connection and the fuse. If the fuse is blown, replace it.
• Paper Not Tight Enough: Ensure the sublimation paper is tightly wrapped around the tumbler/mug and secured with heat tape to prevent gaps or shifting during pressing.

Especificacions

Garantia i suport

The EENOUR Auto Tumbler Heat Press Machine comes with a 1 anys de garantia. For any technical support, troubleshooting assistance, or warranty claims, please contact EENOUR customer service through your purchase platform or visit the official EENOUR weblloc.