YESWELDER LYG-1980GK Welding Helmet Replacement Lens User Manual

Introducció

This manual provides instructions for the proper installation and maintenance of the YESWELDER 3PCS Outer Replacement Lens and 6PCS Inner Replacement Lens kit, designed specifically for the LYG-1980GK Welding Helmet. Adhering to these guidelines will ensure optimal performance and longevity of your replacement lenses.

Informació de seguretat

Always prioritize safety when working with welding equipment. Ensure your welding helmet is in good working condition and that all components, including replacement lenses, are installed correctly before use. Improper installation can compromise eye protection. Always wear appropriate personal protective equipment (PPE) for welding tasks.

Configuració i instal·lació

This section details the steps for replacing the outer and inner lenses of your YESWELDER LYG-1980GK welding helmet.

Figura 1: YESWELDER Replacement Lens Kit (3 Outer, 6 Inner). This image displays the complete set of replacement lenses. It includes three larger, slightly curved outer lenses, each with a visible 'WARNING Please Remove This Protective Film Prior To Use' sticker. Below them are six smaller, flat inner lenses. All lenses appear to be made of a clear, slightly green-tinted plastic material.

1. Preparing the Lenses

Before installation, ensure you remove the protective film from ambdós costats of each new lens. The outer lenses have a visible "WARNING Please Remove This Protective Film Prior To Use" sticker, as shown in Figure 1. Failure to remove this film will result in blurry vision and reduced clarity during welding.

2. Replacing the Outer Lens

1. Carefully open the front frame of your LYG-1980GK welding helmet. Refer to your helmet's specific instructions for opening the lens compartment.
2. Remove the old outer lens.
3. Insert a new outer replacement lens, ensuring it fits securely into the designated slot. The outer lens is typically larger and slightly curved.
4. Close the front frame of the helmet, making sure the lens is firmly held in place.

3. Replacing the Inner Lens

1. Locate the inner lens compartment, usually behind the auto-darkening filter (ADF) cartridge.
2. Remove the old inner lens.
3. Insert a new inner replacement lens into its slot. The inner lens is typically smaller and flat.
4. Ensure the inner lens is properly seated and does not obstruct the ADF's function.

Consideracions de funcionament

Once installed, the replacement lenses function as part of your welding helmet's protective system. Ensure both inner and outer lenses are clean and free from scratches or damage for optimal viewing clarity and protection. The lenses are designed to provide a normal viewing screen experience when properly installed in the LYG-1980GK welding helmet.

Manteniment

Neteja de les lents

• Use a soft, clean, lint-free cloth to gently wipe the lenses.
• For stubborn dirt or smudges, lightly dampen the cloth with a mild, non-abrasive lens cleaner or clean water.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can scratch or damage the lens surface.
• Ensure lenses are completely dry before re-installing or using the helmet.

Inspecció

Regularly inspect both inner and outer lenses for any signs of damage, such as deep scratches, cracks, or excessive pitting from welding spatter. Damaged lenses should be replaced immediately to maintain adequate eye protection.

Resolució de problemes

• Blurry or Unclear Vision:

  Check if the protective film has been removed from both sides of the new lenses. This is a common cause of unclear vision. Also, ensure the lenses are clean and free from smudges or scratches.

• Lenses Not Fitting Securely:

  Verify that you are using the correct replacement lenses for the YESWELDER LYG-1980GK welding helmet. Ensure the lenses are correctly oriented and seated in their respective compartments according to the helmet's design.
• Excessive Glare or Reduced Protection:

  Inspect lenses for any cracks or severe damage. Replace any compromised lenses immediately. Ensure the outer lens is properly installed to protect the auto-darkening filter from spatter.

Especificacions

Informació de la garantia

Specific warranty details for this replacement lens kit are not provided in the product information. Please refer to the official YESWELDER website or contact YESWELDER customer support for detailed warranty terms and conditions.

Atenció al client

For further assistance, technical support, or inquiries regarding your YESWELDER products, please visit the official YESWELDER store or contact their customer service department.

YESWELDER Official Store: https://www.amazon.com/stores/YESWELDER/page/3785FD6D-BC7F-4A1C-957D-F66EBF8A2EE9