MANHATTAN Ultra Slim Rigid TV Wall Mount (Model 461917) Instruction Manual

1. Introducció

This manual provides detailed instructions for the safe and proper installation and use of your MANHATTAN Ultra Slim Rigid TV Wall Mount, Model 461917. This fixed wall mount is designed to securely hold large flat and curved screen televisions ranging from 60 to 120 inches, with a maximum load capacity of 120 kg (264 lbs). Please read all instructions carefully before installation to ensure optimal performance and safety.

2. Informació de seguretat

• Capacitat de pes: Do not exceed the maximum load capacity of 120 kg (264 lbs). Exceeding this limit may result in serious injury or property damage.
• Mida de la pantalla: Aquest suport és adequat per a televisors d'entre 60 i 120 polzades.
• Estructura de la paret: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. Wood studs, solid concrete, or concrete block walls are recommended. Do not install on drywall alone.
• Instal·lació professional: Si no esteu segurs del procés d'instal·lació o de l'adequació de la vostra paret, consulteu un instal·lador professional qualificat.
• Eines: Feu servir les eines adequades per a la instal·lació. Porteu sempre ulleres de seguretat.
• Nens: Mantenir els nens allunyats de la zona d'instal·lació.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de començar la instal·lació.

• Placa de paret (1)
• Suports de TV (2)
• Hardware Kit (screws, washers, spacers, anchors)
• Clip-on Spirit Level (1)

Figura 1: Mésview of the MANHATTAN Ultra Slim Rigid TV Wall Mount components, including the wall plate and two TV brackets.

4. Especificacions

Figure 2: Illustration of VESA compatibility, showing the range from 50x50 to 900x600.

Figure 3: Detailed technical drawing displaying the dimensions of the wall mount.

5. Configuració i instal·lació

5.1. Eines necessàries (no incloses)

• Llapis
• Trepant
• Cercador de perns
• Cinta mètrica
• Clau anglesa o clau anglesa ajustable
• Tornavís Phillips

5.2. Attaching TV Brackets to the TV

1. Col·loca amb cura el televisor cap per avall sobre una superfície suau i neta per evitar que es faci malbé la pantalla.
2. Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
3. Seleccioneu els cargols, les volanderes i els separadors adequats del kit de maquinari que s'adaptin al patró VESA del vostre televisor.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. The pull straps should hang freely below the TV.

Figura 4: Primer pla view of the quick-release spring lock mechanism on the TV bracket, designed for easy installation and removal.

5.3. Mounting the Wall Plate to the Wall

1. Determine the desired height for your TV. Mark the center point on the wall.
2. Use a stud finder to locate at least two adjacent wood studs. Mark their centers. For concrete walls, ensure you use appropriate concrete anchors (included).
3. Position the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use the included clip-on spirit level to ensure the wall plate is perfectly horizontal.
4. Mark the drilling points through the wall plate holes.
5. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the chosen lag bolts/anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly, but do not overtighten.

Figure 5: The included clip-on spirit level helps ensure precise horizontal alignment during wall plate installation.

5.4. Penjar el televisor

1. With assistance, carefully lift the TV (with brackets attached) and align the TV brackets with the wall plate.
2. Enganxeu els suports del televisor a la vora superior de la placa de paret.
3. Gently lower the TV until the quick-release spring locks engage, securing the TV to the wall plate. You should hear an audible click.
4. Pull the release straps to ensure the locks are engaged and the TV is securely mounted.

Figura 6: Un example of a television securely mounted to the wall using the MANHATTAN Ultra Slim Rigid TV Wall Mount.

6. Funcionament

Once installed, the MANHATTAN Ultra Slim Rigid TV Wall Mount provides a fixed, low-profile position for your television. To remove the TV from the wall mount:

1. Locate the pull straps hanging below the TV.
2. Pull both straps downwards simultaneously to disengage the quick-release spring locks.
3. With assistance, carefully lift the TV off the wall plate.

7. Manteniment

• Neteja: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Comprovació periòdica: Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats i segurs.
• Danys: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.

8. Solució De Problemes

• TV fora de nivell: Ensure the wall plate was installed horizontally using the spirit level. If not, remove the TV, adjust the wall plate, and re-mount.
• TV Not Engaging Locks: Ensure the TV brackets are correctly aligned with the wall plate and that no cables are obstructing the locking mechanism. Pull the straps to confirm engagement.
• La muntanya sembla inestable: Immediately remove the TV. Re-check all wall plate fasteners and ensure they are securely anchored into studs or appropriate concrete. Do not re-mount the TV until stability is confirmed.

9. Garantia i Suport

This MANHATTAN product is covered by a Manufacturer Guarantee. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official MANHATTAN website. For technical support or assistance with installation, please contact MANHATTAN customer service.

MANHATTAN Customer Support: Please refer to your product packaging or the MANHATTAN weblloc web per obtenir informació de contacte actualitzada.