Intex 6941057465647
Intex Inflatable Ultra Lounge with Ottoman User Manual
Model: 6941057465647
Marca: Intex
Producte acabatview
The Intex Inflatable Ultra Lounge with Ottoman is designed for ultimate comfort and convenience, suitable for both indoor and outdoor use. This set includes a spacious inflatable lounge chair and a matching ottoman, providing a versatile seating solution. It features a cozy velvety material, an angled backrest for support, and a built-in cupholder for added utility. The lounge is easy to inflate and deflate, making it highly portable and simple to store.
Característiques principals:
- Ultimate Lounging: Angled backrest for comfort, built-in cupholder.
- Comoditat: Cozy velvety material, matching ottoman for leg support.
- Convenient: Easy to inflate and deflate with 2-in-1 valve.
- Easy Storage Solution: Folds compactly for storage or travel.
- Qualitat i valor: Designed, built, and tested to high standards.
Figure 1: Intex Inflatable Ultra Lounge with Ottoman, showcasing the chair and separate ottoman.
Instruccions de configuració
- Preparació: Ensure the product is set up in an area cleared of debris or anything that could cause a tear or puncture.
- Localitzar vàlvules: Identify the 2-in-1 inflation/deflation valves on both the lounge chair and the ottoman.
- Inflate Lounge Chair:
a. Make sure the exhaust valve cap is securely tightened.
b. Pull the valve cap to open the inflation valve.
c. Insert the nozzle from an air pump (not included) into the inflation valve.
d. Inflate the lounge chair to approximately 80% of desired firmness. Do not overinflate.
e. Close the valve cap securely after inflation.
- Inflate Ottoman: Repeat steps 3b-3e for the ottoman. Inflate to approximately 80% of desired firmness.
- Ajust final: Allow the material to stretch slightly. Add more air if needed to reach desired firmness, ensuring the product remains stable and comfortable.
Video 1: Demonstrates the inflation process for the Intex Inflatable Ultra Lounge and Ottoman, including securing valve caps and inserting the pump nozzle.
Figure 2: Diagram showing the approximate dimensions of the Intex Ultra Lounge chair (102cm x 137cm x 79cm) and ottoman (64cm diameter x 28cm height).
Instruccions de funcionament
Once fully inflated, the Intex Inflatable Ultra Lounge and Ottoman are ready for use. The lounge chair is designed for comfortable seating with an angled backrest. The separate ottoman provides a convenient footrest or additional seating.
Consells d'ús:
- Utilize the built-in cupholder for beverages, keeping them within easy reach.
- For optimal comfort, ensure the lounge and ottoman are inflated to a firm but not rigid state.
- The product is suitable for both indoor and outdoor environments. When used outdoors, place on a smooth, clean surface to prevent punctures.
Figure 3: A person comfortably relaxing on the Intex Ultra Lounge with the ottoman, demonstrating typical indoor use.
Figura 4: Primer pla view of the Intex Ultra Lounge highlighting the integrated cup holder.
Manteniment
Proper maintenance will extend the life of your Intex Inflatable Ultra Lounge and Ottoman.
Neteja:
- Netegeu amb un anunciamp drap i sabó suau. No utilitzeu productes químics agressius ni netejadors abrasius.
- Ensure the product is completely dry before storing to prevent mold or mildew.
Emmagatzematge:
- To store, fully deflate the lounge and ottoman by opening the 2-in-1 valves and allowing air to escape. You can gently press on the product to aid deflation.
- Fold compactly and store in a cool, dry place away from direct sunlight and extreme temperatures.
Figure 5: The Intex Ultra Lounge folded compactly, demonstrating its easy storage and portability.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lounge/Ottoman deflates quickly. | Valve not securely closed or a puncture. | Ensure all valve caps are tightly sealed. Inspect the surface for small holes or tears. Use a repair kit (not included) for punctures. |
| Product is not firm enough after inflation. | Insufficient air or material stretching. | Add more air until desired firmness is achieved. Note that new inflatable products may require additional inflation after initial use as the material stretches. |
| Unpleasant odor from new product. | New material odor (Polyvinyl Chloride). | Allow the product to air out in a well-ventilated area for a few days before use. |
Especificacions
- Material: Clorur de polivinil (vinil)
- Color: Gris
- Mida de la cadira: Approximately 39 inches (W) x 51 inches (D) x 30 inches (H)
- Ottoman Size: Approximately 25 inches (Diameter) x 11 inches (H)
- Capacitat de pes màxim: 220 lliures (99 kg)
- Característiques especials: Built-in Cup Holder, Portable
- Fabricant: Intex Recreation Corp
- Número de model: 6941057465647
- País d'origen: Xina
Figure 6: Visual representation of the chair and ottoman sizes, along with the maximum weight capacity.
Informació de seguretat
It is recommended that users set up the product in an area cleared of debris or anything else that could cause a tear or puncture. Observe all safety warnings and limits for the item. Do not exceed the weight limit of 220 pounds.
Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts a l’Estat de Califòrnia per causar càncer i defectes congènits o altres danys reproductius.
Garantia i suport
Descripció de la garantia: Kkk.
For further support or inquiries, please refer to the official Intex weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.