DORHEA Wireless Remote Control Switch 30A Relay Switch User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your DORHEA Wireless Remote Control Switch. This device is designed to provide convenient remote control for various electrical equipment, offering flexibility and enhanced control in smart home, industrial, and security applications.

2. Característiques del producte

• Alta capacitat de commutació: Built-in power relay with 30A switching capacity for stable and reliable performance.
• Interval estès: Utilizes RF technology to transmit signals through walls, floors, and doors, with an effective range of 100 to 328 feet (30 to 100 meters) without obstacles.
• Secure Learning Code: Features a high-security learning code with low repetitive rates and a re-learn mode. Old codes can be deleted and new ones learned, ensuring control even if a remote is lost.
• Modes de treball flexibles: Supports Momentary, Toggle, and Latched working modes, allowing customization for various applications.
• Aplicació àmplia: Suitable for controlling lighting, fans, small appliances, air conditioners, heaters, audio systems, security alarms, and more.

3. Contingut del paquet

• 1 x comandament a distància sense fil
• 1 x 30A Relay Receiver Switch

Image: The DORHEA wireless remote control and the 30A relay receiver unit, showing their compact design.

4. Especificacions

Image: Detailed dimensions of the remote control (61mm x 28mm) and the receiver unit (65mm x 43mm x 29mm).

5. Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans d'instal·lar o utilitzar aquest dispositiu. Si no segueix aquestes instruccions, es poden produir descàrregues elèctriques, incendis o danys materials.

• Risc elèctric: Installation should only be performed by a qualified electrician or knowledgeable individual. Ensure power is disconnected at the circuit breaker before any wiring.
• Voltage Compatibilitat: Comproveu que el voltage of your electrical system matches the operating voltage range of the switch (AC 100V-240V).
• Capacitat de càrrega: No supereu el corrent de càrrega màxim de 30 Amps. Overloading can cause overheating and fire.
• Cablejat adequat: Ensure all wire connections are secure and correctly terminated to prevent short circuits or loose connections.
• Condicions ambientals: No exposeu el dispositiu a la humitat, temperatures extremes ni ambients corrosius.

6. Instal·lació i cablejat

The receiver unit must be wired into your electrical circuit. Always ensure power is OFF before beginning installation.

6.1 Basic Wiring Overview

Image: A simplified diagram showing the input and output connections for the receiver unit and its connection to a load (e.g., a light bulb).

6.2 Wiring for Single Phase 110V/120V Application

1. Connect the red wire from your AC input to the 'L' terminal of the receiver's AC Input.
2. Connect the black wire from your AC input to the 'N' terminal of the receiver's AC Input.
3. Connect the red wire from the receiver's AC Output 'L' terminal to the 'L' terminal of your equipment/load.
4. Connect the black wire from the receiver's AC Output 'N' terminal to the 'N' terminal of your equipment/load.
5. Ensure the green ground wire from your input connects to the equipment's green ground wire.

Image: Detailed wiring diagram for connecting the receiver in a single-phase 110V/120V electrical system, showing input, output, and load connections.

6.3 Wiring for Single Phase 240V or 3 Phase Voltage Application (with AC Contactor)

Per a un volum superiortage or 3-phase applications, an external AC Contactor is required to handle the main load. The wireless switch will control the contactor's coil.

1. Connect the red wire from your AC input (e.g., L1) to the 'L' terminal of the receiver's AC Input.
2. Connect the black wire from your AC input (e.g., L2 or Neutral) to the 'N' terminal of the receiver's AC Input.
3. Connect the red wire from the receiver's AC Output 'L' terminal to one side of the AC Contactor's coil (e.g., A1).
4. Connect the black wire from the receiver's AC Output 'N' terminal to the other side of the AC Contactor's coil (e.g., A2).
5. Wire the main 240V or 3-phase power through the main contacts of the AC Contactor to your equipment/load.

Image: Detailed wiring diagram for controlling a 240V or 3-phase load using an external AC Contactor, with the wireless switch activating the contactor's coil.

7. Modes de funcionament

The receiver supports three primary operating modes: Momentary, Toggle, and Latched. The specific mode is set during the pairing process.

7.1 Momentary Mode

In Momentary mode, the relay activates only while the remote button is pressed and held. ReleasinEl botó desactiva el relé.

• Funcionament: Press and hold remote button → Relay ON; Release remote button → Relay OFF.
• Aplicació: Ideal for applications requiring temporary activation, such as electric door openers or momentary pump control.

7.2 Mode de commutació

In Toggle mode, each press of the remote button alternates the relay state between ON and OFF.

• Funcionament: Press remote button → Relay ON; Press same button again → Relay OFF.
• Aplicació: Suitable for standard ON/OFF control of lights, fans, or other appliances.

7.3 Latched Mode

Latched mode requires two distinct buttons on the remote. One button turns the relay ON, and another button turns it OFF.

• Funcionament: Press Button A → Relay ON; Press Button B → Relay OFF.
• Aplicació: Useful for specific ON/OFF controls where distinct buttons are preferred, such as roller blind doors (up/down).

8. Pairing Remote Control (Learning Mode)

To pair a remote control with the receiver and set its operating mode:

1. Momentary Mode Setup:
   • Premeu el botó d'aprenentatge del receptor una vegada. The LED indicator will flash once.
   • Immediately press the desired button on your remote control. The LED indicator will flash multiple times, indicating successful pairing in Momentary mode.
2. Toggle Mode Setup:
   • Premeu el botó d'aprenentatge del receptor dues vegades. The LED indicator will flash twice.
   • Immediately press the desired button on your remote control. The LED indicator will flash multiple times, indicating successful pairing in Toggle mode.
3. Latched Mode Setup:
   • Premeu el botó d'aprenentatge del receptor tres vegades. The LED indicator will flash three times.
   • Immediately press the 'ON' button (e.g., Button A) on your remote control.
   • After 3 seconds, press the 'OFF' button (e.g., Button B) on your remote control. The LED indicator will flash multiple times, indicating successful pairing in Latched mode.

9. Restabliment del receptor

To clear all paired remote controls from the receiver's memory:

1. Long press the learning button on the receiver for approximately 8 segons.
2. The LED indicator will flash rapidly and then turn off, indicating that all previously learned transmitters have been cleared.
3. After a reset, all remote controls will no longer function and must be re-paired using the learning procedure described in Section 8.

10. Aplicacions

The DORHEA Wireless Remote Control Switch offers versatile applications, including but not limited to:

• Lighting control (indoor and outdoor)
• Control del ventilador
• Pump control (e.g., irrigation systems, water features)
• Garage door and roller blind door control
• Industrial electrical equipment activation
• Security systems and anti-theft alarms
• Holiday decorations and charging devices
• Remote control for workshop vacuums or other electronic devices

Imatge: Examples of common applications, including controlling outdoor fountains, garage doors, home lighting, and irrigation systems.

11. Manteniment

The DORHEA Wireless Remote Control Switch is designed for minimal maintenance. Follow these guidelines to ensure longevity:

• Neteja: Netegeu el dispositiu amb un drap sec i suau. No utilitzeu productes químics agressius ni netejadors abrasius.
• Inspecció: Comproveu periòdicament les connexions del cablejat per comprovar si estan ben ajustades i si hi ha signes de desgast o danys.
• Substitució de la bateria: If the remote control's range decreases or it becomes unresponsive, replace its battery (type not specified, typically a small coin cell or A27/23A type).
• Medi ambient: Ensure the receiver is installed in a dry, protected location away from direct sunlight, moisture, and extreme temperatures.

12. Solució De Problemes

13. Garantia i Suport

DORHEA products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt for warranty claims.