Agrieyes AG-W38 2-in-1 Amber Strobe and White Position LED Light Instruction Manual

1. Producte acabatview

The Agrieyes AG-W38 is a versatile 2-in-1 LED light designed for vehicle safety and warning applications. It integrates both amber strobe lights and a white position light into a single, compact unit. This light is engineered for high visibility and durability, making it suitable for a wide range of vehicles including trucks, construction equipment, rescue vehicles, and ambulances.

Les característiques clau inclouen:

• Doble funcionalitat: Combines amber strobe warning lights with a white position light.
• High Brightness, Low Power: Utilizes 12 ceramic base LED chips for efficient illumination and reduced heat.
• Construcció duradora: Features a sturdy aluminum base for heat dissipation and a chrome-plated decorative cover for enhanced aesthetics and protection.
• Múltiples modes de parpelleig: Offers 5 distinct flashing patterns, with memory recall for the last used mode.
• Àmplia aplicabilitat: Designed for universal screw mount installation on various vehicles.

2. Què hi ha a la caixa

Verifiqueu que tots els components siguin presents abans de començar la instal·lació.

• Agrieyes AG-W38 2-in-1 Emergency Light(s)
• Screw Set (for mounting)

3. Guia d'instal·lació

Follow these steps for proper installation of your Agrieyes AG-W38 LED light. Professional installation is recommended for optimal performance and safety.

1. Prepareu el dispositiu: Place the light unit on a stable surface.
2. Traieu la pel·lícula protectora: Carefully peel off any protective film from the light's lens.
3. Assegureu la base: Thread the screws through the aluminum shell and place the light onto the flat and elastic pads. Fix it securely to the desired mounting surface on your vehicle.
4. Attach Reflective Cover: Once the light is mounted, attach the reflective chrome cover to the aluminum shell. Ensure it snaps into place securely.

Figura 3.1: Passos fàcils d'instal·lació

Connexió de cablejat

The AG-W38 light features a four-wire connection system. Identify each wire according to its color:

• Fil vermell: Connects to the positive (+) power supply for the strobe light function.
• Fil negre: Connects to the negative (-) ground.
• Fil groc: Used to cycle through the different flashing modes. Momentarily touch this wire to the positive (+) power supply to change modes.
• Fil blanc: Connects to the positive (+) power supply for the white position light function.

4. Instruccions de funcionament

The Agrieyes AG-W38 offers both a steady white position light and multiple amber strobe patterns for warning. The light remembers the last used flashing mode.

Activació de funcions

• White Position Light: Apply power to the white wire.
• Amber Strobe Light: Apply power to the red wire.

Changing Flashing Modes

To cycle through the 5 available flashing modes, momentarily touch the yellow wire to the positive (+) power supply. Each brief contact will advance to the next mode. The light will retain the last selected mode when powered off and on again.

Available flashing modes include:

• Single-flash
• Doble flaix
• Triple-flash
• Quad-flash
• Penta-flash

Figure 4.1: Strobe and Position Light Modes

5. Manteniment

The Agrieyes AG-W38 LED light is designed for minimal maintenance. To ensure longevity and optimal performance:

• Neteja regular: Netegeu periòdicament la lent amb un drap suau iamp cloth to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
• Inspeccioneu el cablejat: Annually inspect all wiring connections for signs of wear, corrosion, or damage. Ensure connections remain secure.
• Comproveu el muntatge: Verify that the light remains securely mounted to the vehicle. Tighten any loose screws as needed.

6. Solució De Problemes

If you encounter issues with your Agrieyes AG-W38 LED light, refer to the following common troubleshooting steps:

• Light Not Functioning:
  • Check all power connections (red, white, black wires) to ensure they are correctly and securely connected.
  • Verify that the vehicle's power source is active and providing the correct voltage (12 V CC).
  • Inspect for any blown fuses in the vehicle's electrical system that might be connected to the light.
• Strobe Modes Not Changing:
  • Ensure the yellow wire is making proper momentary contact with the positive (+) power supply when attempting to change modes.
  • Check for any damage to the yellow wire or its insulation.
• Reduced Brightness or Uneven Lighting:
  • Clean the light lens to remove any dirt, dust, or obstructions.
  • Verify that the light is receiving adequate power and there are no voltage gotes.

If these steps do not resolve the issue, contact Agrieyes customer support for further assistance.

7. Especificacions

Figura 7.1: Dimensions del producte

8. Garantia i Suport

Agrieyes products are manufactured with dedication and experience, designed to exceed industry standards for warning lights. While specific warranty details are not provided in this manual, Agrieyes is committed to product quality and customer safety.

For warranty inquiries, technical support, or any questions regarding your Agrieyes AG-W38 LED light, please contact Agrieyes customer service through their official channels or the retailer where the product was purchased.