Varmilo VPE87 Chang'e TKL Mechanical Keyboard User Manual

Introducció

The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

Contingut del paquet

• Varmilo VPE87 Mechanical Keyboard
• Cable USB-C
• 2.4 GHz Wireless Receiver (typically stored in keyboard)
• Extractor de tecles (pot estar inclòs)
• Extractor d'interruptor (pot estar inclòs)

Configuració

Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.

1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.

1. Connecteu el cable USB-C proporcionat al port USB-C del teclat.
2. Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
3. For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).

2. Adjusting Keyboard Angle

Imatge: Side profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.

The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.

Instruccions de funcionament

Modes de connectivitat

The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.

Mode per cable

• Connect the USB-C cable from the keyboard to your computer.
• El sistema operatiu reconeixerà automàticament el teclat.
• This mode also charges the keyboard's internal battery.

Mode Bluetooth

• Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
• Al dispositiu (ordinador, tauleta, telèfon intel·ligent), activeu el Bluetooth i cerqueu dispositius nous.
• Select "Varmilo VPE87" (or similar name) from the list of available devices.
• Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.

Mode sense fil de 2.4 GHz

• Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
• Connecteu el receptor USB a un port USB disponible de l'ordinador.
• Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
• El teclat s'hauria de connectar automàticament al receptor.

Control de la llum de fons

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.

The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:

• Fn + Arrow Up: Augmenta la brillantor de la retroiluminació.
• Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
• Fn + Altres tecles: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.

Hotswap Sockets (Switch Customization)

Imatge: Superior view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.

The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.

1. Treure la tapa de les tecles: Feu servir un extractor de tecles per treure suaument la tecla desitjada.
2. Treure l'interruptor: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
3. Insereix un nou interruptor: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
4. Substitueix la tapa de les tecles: Torneu a col·locar la tapa de les tecles al nou interruptor.

Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.

Altres característiques

• Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
• 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.

Manteniment

Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.

• Neteja de les tecles:
  • Use a keycap puller to remove keycaps.
  • Wipe keycaps with a damp cloth and mild soap solution. Avoid harsh chemicals.
  • Ensure keycaps are completely dry before reattaching.
• Neteja del cos del teclat:
  • Use a soft, dry cloth to wipe down the keyboard surface.
  • Per a la pols i les restes entre les tecles, feu servir aire comprimit.
• Emmagatzematge: Guardeu el teclat en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Vessaments de líquids: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.

Resolució de problemes

If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:

Especificacions

Garantia i Suport

Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo weblloc.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official weblloc web o a través del venedor on vau comprar el producte.

Visit the official Varmilo Store for more information: Varmilo Store on Amazon