Introducció
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi 3-in-1 Convertible Sleeper Chair. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.
Informació important de seguretat
ADVERTIMENT: Always follow the assembly instructions carefully. Be cautious when using the arm rest to avoid injury. Do not exceed the maximum weight capacity of 440 lbs.
- Assegureu-vos que tots els components estiguin ben subjectats abans d'utilitzar-los.
- Mantingueu els nens i les mascotes allunyats durant el muntatge.
- Do not stand on the chair or bed.
- Avoid placing hot items directly on the fabric.
- Inspeccioneu regularment la cadira per detectar peces soltes o danys.
Contingut del paquet
Verifiqueu que hi hagi totes les peces abans de començar el muntatge. Si falta alguna peça o hi ha alguna danyada, poseu-vos en contacte amb el servei d'atenció al client.
- Sofa Chair Base
- Coixí de respatller
- Coixí de seient
- Mecanisme de llit extraïble
- Coixinets de braç
- Kit de maquinari de muntatge
- Manual d'instruccions
Muntatge i muntatge
Follow these steps to assemble your Polibi 3-in-1 Convertible Sleeper Chair.
- Desembaleu tots els components i col·loqueu-los sobre una superfície neta i tova per evitar ratllades.
- Attach the armrests to the main chair base using the provided hardware. Ensure they are securely tightened.
- Insert the backrest cushion into its designated slot.
- Place the seat cushion onto the chair base.
- Verify that the pull-out bed mechanism operates smoothly.
Image: Dimensional diagram of the Polibi 3-in-1 Convertible Sleeper Chair. Shows the chair in upright position with dimensions: 33 inches height, 33.5 inches depth, 34 inches width. Seat dimensions are 18 inches height, 24 inches depth, 20 inches width. The diagram also illustrates the chair converted to a bed, showing a total length of 66 inches and a width of 24 inches for the extended section.
Instruccions de funcionament
Converting from Chair to Lounger/Bed
The Polibi 3-in-1 Convertible Sleeper Chair can be easily transformed into a sofa chair, lounger, or single bed.
- Sofa Chair Position: Ensure the pull-out section is fully retracted and the backrest is in the upright position.
- Lounger Position: Gently pull the portable handle located on the front of the seat to extend the footrest section. The bottom pulley device will assist in smooth extension. Adjust the backrest to your desired reclining angle (105° to 145°).
- Single Bed Position: Fully extend the pull-out section until it is flat. Adjust the backrest to a fully flat (180°) position to create a single bed.
Image: The Polibi 3-in-1 Convertible Sleeper Chair displayed in its three primary modes: a standard sofa chair, a recliner with the footrest extended, and a fully flat single bed configuration.
Imatge: Un primer pla view of the Polibi Sofa Bed Chair's adjustable backrest, showing three common angles: 105 degrees for coffee/sitting, 145 degrees for reading, and 180 degrees for sleeping.
Image: Detail of the pull-out section of the Polibi Sofa Bed Chair, highlighting the portable handle for easy extension and the smooth pulley device at the bottom for effortless conversion.
Manteniment i cura
Proper care will extend the life of your convertible sleeper chair.
- Neteja: For general cleaning, vacuum the linen fabric regularly using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
- Cura del marc: The sturdy metal frame requires minimal maintenance. Periodically check all bolts and screws and tighten if necessary.
- Cura del teixit: Eviteu l'exposició directa a la llum solar durant períodes prolongats per evitar la decoloració.
- Capacitat de pes: No supereu la capacitat màxima de pes de 440 lliures.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Difficulty converting chair to bed. | Mechanism obstructed or not fully engaged. | Ensure no objects are blocking the pull-out mechanism. Apply gentle, even force when pulling the handle. Check if the pulley device is clean and free of debris. |
| La cadira sembla inestable o trontolla. | Maquinari de muntatge solt. | Inspect all bolts and screws. Tighten any loose connections using the appropriate tools. |
| Backrest does not adjust smoothly. | Mecanisme rígid o obstruït. | Ensure no fabric or foreign objects are caught in the backrest adjustment mechanism. Apply light lubricant to moving parts if necessary (consult customer support first). |
Especificacions
- Marca: Polibi
- Model: B0CLTSMDC8
- Color: Blanc
- Material: Linen (Fabric), Sponge (Fill Material), Metal (Frame)
- Product Dimensions (Chair): 33.5 "P x 34" W x 33" H
- Product Dimensions (Bed): Aproximadament 66" de profunditat x 34" d'amplada x 24" d'alçada
- Capacitat de pes: 440 lliures
- Estil d'esquena: Slat Back
- Característica especial: Arm Rest, Cushion Availability, Convertible Design
- Interval d'edat (descripció): Adult
- Ús interior/exterior: Interior
Garantia i Suport
For warranty information or customer support, please contact Polibi directly through their official weblloc web o el distribuïdor on es va comprar el producte. Conserveu el rebut de compra com a comprovant de compra.
Política de devolució: This product typically has a 30-day return/replacement policy from the date of purchase. Refer to your retailer's specific return policy for details.