1. Introducció
Thank you for choosing the SANITMAX SM350 Commercial Cold Water Carpet Extractor. This powerful walk-behind machine is engineered for deep cleaning large carpeted areas in commercial environments such as hotels, offices, and schools. With its high-pressure spray, strong suction, and efficient brush agitation, the SM350 delivers superior cleaning results and faster drying times. Please read this manual thoroughly before operation to ensure safe and effective use of your new equipment.
2. Informació de seguretat
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica o lesions.
- Llegiu totes les instruccions abans d'utilitzar l'aparell.
- Do not operate the machine with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- No estireu ni porteu el cable, utilitzeu el cable com a mànec, tanqueu una porta del cable o estireu el cable al voltant de les vores o cantonades esmolades. Mantingueu el cable allunyat de les superfícies escalfades.
- No desconnecteu estirant del cable. Per desconnectar, agafa l'endoll, no el cable.
- No manipuleu l'endoll o l'aparell amb les mans mullades.
- No utilitzar amb cap obertura bloquejada; mantenir lliure de pols, pelusa, cabells i qualsevol cosa que pugui reduir el flux d'aire.
- Mantingueu els cabells, la roba solta, els dits i totes les parts del cos lluny de les obertures i les parts mòbils.
- No l'utilitzeu per recollir líquids inflamables o combustibles, com ara la gasolina, ni l'utilitzeu en zones on puguin estar presents.
- Apagueu tots els controls abans de desconnectar.
- Tingueu molta cura quan netegeu les escales.
- No utilitzeu per recollir res que estigui cremant o fumant, com ara cigarrets, llumins o cendres calentes.
- Feu servir només tal com es descriu en aquest manual. Utilitzeu només els accessoris recomanats pel fabricant.
- Always disconnect the appliance from the electrical outlet before servicing.
3. Producte acabatview
The SANITMAX SM350 is a robust commercial carpet extractor designed for efficiency and deep cleaning.
Figure 1: SANITMAX SM350 Main Unit with Accessories. This image displays the complete carpet extractor unit in blue and black, alongside its coiled hose and hand tool attachment, ready for operation.
Components clau:
- Unitat principal: Houses the motor, tanks, and controls.
- Solution Tank (10.5 Gallons): Conté aigua neta i solució de neteja.
- Recovery Tank (8 Gallons): Collects dirty water extracted from the carpet.
- Capçal de neteja: Features a 13.8" cleaning width and a 900 RPM high-speed brush.
- Tauler de control: Easy-to-operate switches for brush, vacuum, and spray functions.
- Power Cord (49 FT): Provides extended reach for large areas.
- Hose and Hand Tool: For spot cleaning and upholstery (sold separately or included in some packages).
Figure 2: Easy Operation Control Panel and Extended Power Cord. This image highlights the user-friendly control panel with clearly labeled switches for various functions, and the long 49-foot power cord that allows for extensive cleaning without frequent outlet changes.
4. Configuració
4.1 Desembalatge
Carefully remove all components from the packaging. Inspect the machine for any damage. Retain packaging for future storage or shipping.
4.2 Omplir el dipòsit de solució
- Locate the 10.5-gallon solution tank.
- Unscrew the cap and fill the tank with cold water.
- Add the recommended amount of SANITMAX carpet cleaning solution according to the solution's instructions. Do not overfill.
- Torneu a col·locar la tapa de manera segura.
4.3 Preparing the Recovery Tank
The 8-gallon recovery tank is designed to collect dirty water. Ensure it is empty and properly seated before starting operation.
Figure 3: Easy Refill System. This image illustrates the transparent recovery hose and visible cover, making it easy to monitor water levels and refill the solution tank.
4.4 Connexió de potència
Plug the 49 FT power cord into a standard 120V 60Hz electrical outlet. Ensure the outlet is grounded and capable of handling the machine's power requirements.
5. Instruccions de funcionament
5.1 Pre-Cleaning
Before operating the carpet extractor, thoroughly vacuum the carpet to remove loose dirt and debris. This will enhance the effectiveness of the deep cleaning process.
5.2 Applying Cleaning Solution and Extraction
- Turn on the machine using the power switch on the control panel.
- Engage the brush motor (900 RPM) and spray pump (160 PSI) switches.
- Slowly push the machine forward over the carpet, allowing the high-pressure spray to penetrate carpet fibers and the brush to agitate dirt.
- Pull the machine backward over the same area. The powerful 21 KPA suction will extract the dirty water and cleaning solution, promoting faster drying.
- Overlap each pass slightly to ensure complete coverage.
- For heavily soiled areas, repeat the process.
Figure 4: SM350 in Action on a Large Carpeted Area. This image shows the carpet extractor being used in a spacious office environment, demonstrating its suitability for large-scale cleaning tasks.
5.3 Spot Cleaning (with Hand Tool)
If your model includes a hand tool, connect it to the designated port on the machine. Use the hand tool for targeted spot cleaning or cleaning upholstery. Follow the same spray and suction principles as with the main unit.
6. Manteniment
6.1 Buidatge i neteja dels dipòsits
- After each use, turn off the machine and unplug it.
- Remove the recovery tank and empty the dirty water into a drain.
- Rinse both the recovery tank and the solution tank thoroughly with clean water.
- Allow tanks to air dry completely before reassembling or storing.
6.2 Cleaning the Brush and Nozzle
Regularly inspect and clean the brush roller and spray nozzle to prevent clogs and maintain optimal performance. Remove any hair, lint, or debris that may have accumulated.
6.3 Emmagatzematge
Store the SANITMAX SM350 in a clean, dry area. Ensure all tanks are empty and dry. Coil the power cord neatly.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La màquina no s'encén | Sense alimentació; connexió fluixa | Comproveu la connexió del cable d'alimentació; assegureu-vos que la presa de corrent funcioni. |
| Sense esprai | Solution tank empty; clogged nozzle; pump not engaged | Refill solution tank; clean nozzle; ensure spray pump switch is ON. |
| Sense succió | Recovery tank full; clogged hose/nozzle; vacuum motor not engaged | Empty recovery tank; clear any clogs; ensure vacuum motor switch is ON. |
| Mal rendiment de neteja | Insufficient solution; worn brush; too fast operation | Check solution level; inspect/replace brush; slow down operation. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | SANITMAX |
| Model | SM350 |
| Dimensions del producte | 45.3 "P x 18.5" W x 36.2" H |
| Pes de l'article | 110 lliures |
| Capacitat del dipòsit de solució | 10.5 galons |
| Capacitat del dipòsit de recuperació | 8 galons |
| Font d'alimentació | Corded Electric (120V 60Hz) |
| Longitud del cable d'alimentació | 49 FT |
| Pressió de la bomba | 160 PSI |
| Potència d'aspiració | 21 KPA (2-stage 1.5 HP vacuum motor) |
| Brush Motor Speed | 900 RPM (150W) |
| Amplada de neteja | 13.8 polzades |
| Productivitat | Up to 2,150 SQ FT PER HOUR |
9. Garantia i Suport
The SANITMAX SM350 Commercial Cold Water Carpet Extractor comes with a 2-Year Protection Plan. SANITMAX offers US Local Support, provides a Complete OEM Kit, and offers Nationwide On-site Repair services.
For technical assistance, warranty claims, or to order replacement parts, please contact SANITMAX customer support. Refer to your purchase documentation for specific contact details or visit the official SANITMAX weblloc.