1. Introducció
This manual provides detailed instructions for the assembly, operation, and maintenance of your addlon Tree Floor Lamp Model YY-02. Please read this manual thoroughly before use to ensure proper function and safety.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar el muntatge:
- Lamp Base
- Lamp Pole Sections (multiple)
- 3 x L.amp Heads with GU10 Bulb Sockets
- 3 x bombetes LED
- Control remot
- Power Cable with Foot Switch
- Manual d'usuari (aquest document)
Image: All components of the addlon Tree Floor Lamp, including the base, pole, three adjustable lamp heads, and the remote control unit.
3. Instruccions de muntatge
Assembly typically takes approximately 20 minutes. Follow these steps:
- Enganxeu la base: Securely screw the lowest pole section into the lamp base.
- Connecteu les seccions del pol: Carefully thread the power cord through each pole section and screw the sections together clockwise until snug. Ensure no wires are pinched.
- Adjunta Lamp Caps: Screw the three lamp heads onto the designated points on the upper pole section.
- Instal·leu les bombetes: Insert the provided LED bulbs into each GU10 socket in the lamp caps.
- Connectar l'alimentació: Connecteu el cable d'alimentació a una presa elèctrica estàndard.
Image: The assembled addlon Tree Floor Lamp with key dimensions, showing a total height of 63 inches.
4. Instruccions de funcionament
4.1 Encès/Apagat
- Interruptor de peu: Press the foot switch located on the power cable to turn the lamp encès o apagat.
- Comandament a distància: Premeu el botó d'engegada (E/S) al comandament a distància.
4.2 Funcions de control remot
The remote control allows for convenient adjustment of brightness and color temperature from up to 20 meters away.
Image: The remote control for the addlon Tree Floor Lamp, illustrating its various buttons for light control.
Imatge: Detallada view of the remote control, highlighting buttons for stepless brightness adjustment (5% to 100%) and stepless color temperature adjustment (3000K Warm White to 6000K Daylight).
- Ajust de brillantor: Use the brightness up/down buttons on the remote to adjust the light intensity from 1% to 100%.
- Ajust de temperatura de color: Use the color temperature buttons to change the light color from 3000K (warm white) to 6000K (cool white).
- Modes preestablerts: The remote may include pre-set buttons for common brightness or color temperature settings. Refer to the remote's specific markings.
Imatge: Representació visual de la lamp's dimming function, showing light output from 10% to 100% intensity.
4.3 L ajustableamp Caps
Cada lamp head can be adjusted independently to direct light where needed:
- Rotació vertical: Cada lamp head can rotate 180 degrees vertically.
- Rotació horitzontal: Cada lamp head can rotate 360 degrees horizontally.
Image: Illustration detailing the adjustable angles of the lamp heads, allowing for 180-degree vertical and 360-degree horizontal movement.
5. Manteniment
To ensure the longevity and optimal performance of your addlon Tree Floor Lamp, seguiu aquestes pautes de manteniment:
- Neteja: Desconnecteu la lamp de la corrent abans de netejar. Feu servir un drap suau i sec per netejar la lamp pole and heads. Avoid abrasive cleaners or solvents.
- Substitució de bombetes: Assegureu-vos que lamp is unplugged and the bulbs have cooled before attempting to replace them. Use only GU10 LED bulbs of appropriate wattage (màxim 27 watts).
- Cura del cordó: Regularly inspect the power cord and plug for any damage. Do not use the lamp si el cable està esfilagarsat o malmès.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | No power, loose connection, faulty bulb. | Check power outlet, ensure all pole sections are tightened, replace bulb. |
| El comandament a distància no funciona. | Piles gastades, comandament a distància fora de l'abast, obstrucció. | Replace remote batteries, ensure remote is within 20 meters of the lamp, remove obstructions. |
| La llum parpelleja o s'atenua inesperadament. | Bombeta solta, font d'alimentació inestable. | Tighten bulbs, try a different power outlet. |
7. Especificacions
| Característica | Detall |
|---|---|
| Nom del model | YY-02 |
| Marca | addlon |
| Dimensions del producte | 10 "P x 10" W x 64" H |
| Pes de l'article | 9.8 lliures |
| Material | Metall |
| Tipus d'acabat | Pintat |
| Base del bulb | GU10 |
| Tipus de font de llum | LED |
| Wattage | 27 watts (total) |
| Voltage | 110 volts (CA) |
| Mètode de control | Remote, Foot Switch |
| Característiques especials | Adjustable Color Temperature, Dimmable, Remote Control |
| Ús interior/exterior | Interior |
8. Informació de seguretat
- Desendolleu sempre la lamp before moving, cleaning, or replacing bulbs.
- No exposa la lamp a l'aigua o a la humitat excessiva. Aquest producte només és per a ús en interiors.
- Assegureu-vos que lamp es col·loca sobre una superfície estable i anivellada per evitar que es bolqui.
- Mantingueu el cable d'alimentació allunyat de fonts de calor i vores afilades.
- No intenteu modificar o desmuntar el lamp beyond the instructions provided.
9. Garantia i Suport
The addlon Tree Floor Lamp Model YY-02 comes with a Garantia de 2 anys d'assistència del producte. This warranty covers manufacturing defects and ensures your peace of mind.
For any issues, concerns, or warranty claims, please contact addlon customer service. Refer to the contact information provided with your purchase or visit the official addlon weblloc de suport.