Total TCS2241008

Total TCS2241008 100 Liter Air Compressor Instruction Manual

Model: TCS2241008 | Brand: Total

1. Introducció i finalview

The Total TCS2241008 is a heavy-duty, direct-drive air compressor designed for industrial and workshop applications. It features a powerful 2 x 1200W (3.2 HP) motor and an oil-free system, providing efficient and consistent air compression. With a large 100-liter tank, it ensures a stable and reliable supply of compressed air for various pneumatic tools and equipment, reducing motor cycling frequency.

This compressor is an essential tool for professionals in fields such as car repair, carpentry, and other industrial operations requiring a dependable source of compressed air.

Total TCS2241008 100 Liter Air Compressor

Image: The Total TCS2241008 air compressor, showcasing its robust design, 100-liter tank, and control panel.

2. Instruccions de seguretat

Always prioritize safety when operating the air compressor. Failure to follow these instructions may result in serious injury or property damage.

  • Seguretat elèctrica: Assegureu-vos que la font d'alimentació coincideixi amb el volum del compressortage (220-240V, 50Hz). Use a grounded outlet and avoid using extension cords unless absolutely necessary and rated for the compressor's power. Never operate with wet hands or in damp condicions.
  • Seguretat de pressió: Do not exceed the maximum operating pressure of 8 Bar. Always wear appropriate eye protection when working with compressed air. Never direct compressed air at people or animals.
  • Ventilació: Operate the compressor in a well-ventilated area to prevent overheating and ensure proper air intake.
  • Equips de protecció individual (EPI): Always wear safety glasses or goggles. Hearing protection is recommended due to the 75 dB noise level.
  • Estabilitat: Place the compressor on a stable, level surface to prevent tipping. Ensure wheels are locked if applicable.
  • Manteniment: Disconnect power before performing any maintenance or repairs. Regularly inspect hoses, fittings, and the tank for damage.
  • Infants i espectadors: Mantingueu els nens i les persones no autoritzades allunyats de la zona d'operació.

3. Components del producte

The Total TCS2241008 air compressor includes the following main components:

  • Tanc d'aire: 100-liter capacity for storing compressed air.
  • Unitat motora: Two 1200W (total 2400W / 3.2 HP) copper wire motors with a direct drive system.
  • Manòmetres: Displays tank pressure and regulated outlet pressure.
  • Regulador de pressió: Permet ajustar la pressió de l'aire de sortida.
  • Vàlvula de seguretat: Allibera automàticament la pressió si supera un límit segur.
  • Vàlvula de desguàs: Situat a la part inferior del dipòsit per evacuar la condensació.
  • Sortides d'aire: Connections for air hoses and pneumatic tools.
  • Rodes i mànec: For portability and ease of movement.

4. Configuració

Follow these steps for initial setup of your air compressor:

  1. Desembalatge: Carefully remove the compressor from its plywood packaging. Inspect for any shipping damage.
  2. Posicionament: Col·loqueu el compressor sobre una superfície ferma i anivellada en una zona ben ventilada. Assegureu-vos que hi hagi prou espai al voltant de la unitat per a la circulació de l'aire.
  3. Conjunt de rodes (si cal): Attach the wheels and handle according to the diagrams in the separate assembly guide (if provided).
  4. Connexió d'alimentació: Connect the power cord to a grounded 220-240V, 50Hz electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.
  5. Check Drain Valve: Assegureu-vos que la vàlvula de drenatge a la part inferior del dipòsit estigui tancada abans de posar-lo en funcionament.

5. Instruccions de funcionament

To operate your Total TCS2241008 air compressor:

  1. Connectar la mànega d'aire: Attach your air hose and pneumatic tool to the air outlet.
  2. Encès: Flip the power switch to the 'ON' position. The compressor will begin to fill the tank with air.
  3. Monitor de pressió: Observe the tank pressure gauge. The compressor will automatically shut off when the maximum pressure (8 Bar) is reached.
  4. Ajustar la pressió de sortida: Use the pressure regulator knob to set the desired working pressure for your pneumatic tool. The regulated pressure will be shown on the output pressure gauge.
  5. Començar el treball: Once the desired pressure is set, you can begin using your pneumatic tool. The compressor will cycle on and off automatically to maintain tank pressure.
  6. Apagar: When finished, turn the power switch to the 'OFF' position.
  7. Despressuritzar: Before disconnecting tools or hoses, release any remaining air pressure from the tank by opening the drain valve or using an air tool until the gauges read zero.

6. Manteniment

Regular maintenance ensures optimal performance and extends the lifespan of your air compressor. Always disconnect power before performing maintenance.

  • Drain Condensation Daily: Open the drain valve at the bottom of the tank daily after use to release accumulated moisture. This prevents rust and corrosion inside the tank.
  • Filtre d'aire net: Periodically inspect and clean the air filter. A clogged filter reduces efficiency. Replace if damaged.
  • Inspeccioneu les mànegues i els accessoris: Check air hoses and fittings for cracks, leaks, or damage before each use. Replace any worn or damaged components.
  • Comproveu les connexions elèctriques: Assegureu-vos que totes les connexions elèctriques estiguin segures i no presentin danys.
  • Exterior net: Keep the exterior of the compressor clean and free of dust and debris.
  • Oil-Free System: This compressor features an oil-free system, eliminating the need for oil changes or lubrication of the pump.

7. Solució De Problemes

Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions:

ProblemaCausa possibleSolució
El compressor no arrencaNo power, tripped circuit breaker, faulty switchCheck power connection, reset breaker, contact service.
El compressor funciona contínuamentAir leak, faulty pressure switchCheck for leaks in hoses/fittings, contact service for pressure switch.
Sortida de baixa pressió d'airePressure regulator set too low, air leak, clogged air filterAjustar el regulador, comprovar si hi ha fuites, netejar/substituir el filtre d'aire.
Excés de soroll o vibracióLoose components, uneven surfaceCheck for loose bolts, ensure stable placement.
Safety valve releases airTank pressure too high, faulty pressure switchThis is a safety feature. If it occurs frequently, contact service.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact Total customer support.

8. Especificacions

Número de modelTCS2241008
MarcaTotal
Potència d'entrada2 x 1200W (2400W Total / 3.2 HP)
Voltage220-240V ~ 50Hz
Capacitat del dipòsit100 litres (26.4 galons)
Pressió màxima de funcionament8 Bar
Velocitat sense càrrega2850 rpm
Nivell de soroll75 dB
Tipus de motorDirect Drive, Copper Wire
Sistema de lubricacióSense oli
Dimensions del producte (L x A x A)90 x 60 x 80 cm
Pes209 grams (Note: This weight seems unusually low for a 100L compressor and might be a typo in the source data. Please verify with manufacturer.)
ColorBlau
Components inclosos1 x Total TCS2241008 Air Compressor

9. Garantia i Suport

For warranty information, technical support, or service inquiries regarding your Total TCS2241008 air compressor, please refer to the warranty card included with your product or contact Total customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.