Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw User Manual

1. Introducció

The Total TGSLI201286 900W Lithium-Ion Chain Saw is a powerful and efficient tool designed for various cutting tasks. This cordless chain saw features a brushless motor, a 12-inch chain bar, and is powered by two 20V 4.0Ah lithium-ion batteries. It includes a quick charger for convenience. Key safety features such as a quick brake function and automatic lubrication are integrated to enhance user protection and tool longevity. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your chain saw.

Figura 1: Mésview of the Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw.

2. Instruccions de seguretat

Observeu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals quan feu servir eines elèctriques. Llegiu i enteneu totes les instruccions abans d'utilitzar-les.

• Equips de protecció individual (EPI): Utilitzeu sempre ulleres de seguretat, protecció auditiva, guants i calçat resistent. També es recomana un casc i una protecció per a les cames.
• Seguretat de l'àrea de treball: Keep the work area clean and well-lit. Do not operate the chain saw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Seguretat elèctrica: Eviteu el contacte corporal amb superfícies connectades a terra. No exposeu les eines elèctriques a la pluja ni a condicions humides.
• Chain Saw Grip: Always hold the chain saw firmly with both hands when operating. Ensure a secure grip on both the front handle and the rear handle.
• Prevenció de contracops: Be aware of the risk of kickback. Avoid the guide bar tip contacting any object. Use caution when re-entering a cut.
• Seguretat de la bateria: Use only the specified battery packs and charger. Do not short-circuit, disassemble, or expose batteries to high temperatures or fire.
• Manteniment: Disconnect the battery pack before making any adjustments, changing accessories, or storing the chain saw.
• Infants i espectadors: Mantenir els nens i els espectadors a una distància segura de la zona de treball.

3. Components i característiques

The Total TGSLI201286 chain saw is equipped with several features designed for performance and safety.

• Motor sense escombretes: Provides improved performance, efficiency, and extended tool life compared to brushed motors.
• 12-Inch Chain Bar and Chain: A robust cutting system suitable for various tree maintenance and wood cutting tasks.
• 20V 4.0Ah Lithium-Ion Batteries (x2): Two high-capacity batteries provide extended runtime and consistent power.
• Carregador ràpid: Designed to rapidly charge the lithium-ion batteries, minimizing downtime.
• Quick Brake Function: Enhances safety by rapidly stopping the chain in the event of kickback or when the trigger is released.
• Sistema de lubricació automàtica: Ensures continuous lubrication of the chain and guide bar during operation, reducing wear and friction.
• Disseny ergonòmic: Features comfortable handles for improved control and reduced operator fatigue.

4. Configuració

4.1 Càrrega de les bateries

Before first use, fully charge both 20V 4.0Ah lithium-ion batteries using the provided quick charger.

1. Introduïu la bateria al carregador. Assegureu-vos que encaixi al seu lloc.
2. Plug the charger into a standard 220-240V/50/60Hz power outlet.
3. The charger indicator light will show the charging status. Refer to the charger manual for specific light patterns.
4. Un cop carregada completament, traieu la bateria del carregador.

Figure 2: The 20V 4.0Ah Lithium-Ion batteries and quick charger included with the chain saw.

4.2 Instal·lació de la barra guia i la cadena

Ensure the battery is removed before performing any assembly.

1. Traieu la coberta de la cadena afluixant les femelles de subjecció.
2. Place the chain around the drive sprocket and then guide it into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the chain or guide bar).
3. Position the guide bar studs through the holes in the guide bar.
4. Replace the chain cover and hand-tighten the retaining nuts. Do not fully tighten yet.

Figura 3: Primer pla view of the 12-inch guide bar and chain assembly.

4.3 Ajust de la tensió de la cadena

Correct chain tension is crucial for safe and efficient operation.

1. With the chain cover retaining nuts slightly loose, use the chain tensioning screw (often a red dial or screw on the side) to adjust the chain tension.
2. The chain should be snug against the guide bar, but still able to be pulled freely by hand. There should be no sag on the underside of the guide bar.
3. Once the tension is correct, fully tighten the chain cover retaining nuts.

Figure 4: Detail of the chain tension adjustment mechanism on the chain saw.

4.4 Omplir el dipòsit d'oli de la cadena

The automatic lubrication system requires chain oil for proper function.

1. Locate the oil filler cap on the chain saw body.
2. Unscrew the cap and fill the reservoir with appropriate chain and bar oil. Do not use motor oil or waste oil.
3. Substituïu la tapa amb seguretat.

5. Instruccions de funcionament

5.1 Llista de verificació prèvia a l'operació

• Assegureu-vos d'utilitzar tot l'equip de seguretat.
• Comproveu la tensió de la cadena.
• Verify chain oil reservoir is full.
• Inspeccioneu la cadena per detectar l'esmoladura i els danys.
• Assegureu-vos que la zona de treball estigui lliure d'obstacles i de vianants.
• Insert a fully charged battery pack into the chain saw.

5.2 Starting the Chain Saw

1. Agafeu fermament la serra de cadena amb les dues mans.
2. Engage the safety lock-off button (if present).
3. Press the trigger switch to start the motor. The chain will begin to move.

5.3 Cutting Techniques (Basic)

• Mantenir l'equilibri: Always stand with a firm footing and maintain good balance.
• Liquidació: Ensure the area around the cutting path is clear.
• Angle de tall: Approach the material at an appropriate angle, allowing the chain to do the work. Do not force the saw.
• Evitar el cobeig: Be extremely cautious of the guide bar tip. Never cut with the tip of the guide bar.
• Limbing: When limbing, work from the bottom up to avoid pinching the guide bar.

5.4 Stopping the Chain Saw

Release the trigger switch. The quick brake function will rapidly stop the chain. For extended breaks or when moving between work areas, remove the battery pack.

6. Manteniment

Regular maintenance ensures the longevity and safe operation of your chain saw. Always remove the battery pack before performing any maintenance.

6.1 Cleaning the Chain Saw

• After each use, clean sawdust, chips, and debris from the chain saw body, guide bar, and chain.
• Use a brush or compressed air. Avoid using water directly on electrical components.

6.2 Esmolat de la cadena

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain manufacturer's instructions for proper sharpening techniques and file mides.

6.3 Manteniment de la barra guia

• Netegeu la ranura de la barra guia per eliminar les serradures i les restes.
• Periodically flip the guide bar to ensure even wear.
• Check the guide bar for burrs or damage. File down any burrs.

6.4 Cura i emmagatzematge de la bateria

• Emmagatzemeu les bateries en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
• Do not store fully discharged batteries for extended periods. Charge them periodically.
• Remove batteries from the chain saw when not in use.

6.5 Chain Oil Management

Regularly check the chain oil level and refill as needed. Use only recommended chain and bar oil.

7. Solució De Problemes

This section addresses common issues you might encounter with your chain saw.

8. Especificacions

Technical specifications for the Total TGSLI201286 900W Lithium-Ion Chain Saw.

9. Garantia i Suport

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact Total Inc. customer service through their official weblloc web o les dades de contacte que figuren a l'embalatge del producte.