TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun

1. Introducció

Thank you for choosing the TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun. This portable tool is designed for various applications requiring precise heat, such as welding, heat shrink tubing, and loosening rusted bolts. Its cordless design offers excellent mobility and convenience. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image 1.1: The TOTAL TBLI2002 Cordless Heat Gun. This image shows the main unit of the heat gun, highlighting its ergonomic design and the nozzle at the front.

2. Instruccions de seguretat

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this tool.

• Llegeix totes les instruccions: Familiaritzeu-vos amb el funcionament de l'eina i les pautes de seguretat.
• Seguretat personal: Wear appropriate personal protective equipment, including safety glasses and heat-resistant gloves.
• Àrea de treball: Ensure your work area is well-ventilated and free from flammable materials. Do not use in explosive atmospheres.
• Evita el contacte: The nozzle and accessories become extremely hot during and after use. Avoid direct contact with skin.
• Emmagatzematge adequat: Allow the tool to cool completely before storing. Store in a dry, secure place out of reach of children.
• Seguretat de la bateria: Use only specified 20V Lithium-Ion batteries and chargers (sold separately). Do not expose batteries to heat or water.
• Protecció contra el sobreescalfament: The tool is equipped with overheat protection. If it shuts off, allow it to cool before resuming use.

3. Producte acabatview

Understand the main components of your TOTAL TBLI2002 heat gun.

1. Heat Nozzle: Dirigeix ​​l'aire calent.
2. Vendes d'aire: For cooling and air intake.
3. Interruptor d'alimentació: Controls ON/OFF and temperature/airflow settings.
4. Mànec: Empunyadura ergonòmica per a un ús còmode.
5. Port de la bateria: Where the 20V Lithium-Ion battery (sold separately) is inserted.

Imatge 3.1: Desplegada view of the heat gun showing included nozzles and a diagram of the battery compartment. This image illustrates the main components and how accessories attach.

Image 3.2: Close-up of the product label, detailing voltage, temperature, and airflow specifications.

4. Configuració

4.1 Instal·lació de la bateria

The TOTAL TBLI2002 requires a 20V Lithium-Ion battery, which is sold separately. Ensure the battery is fully charged before use.

• Align the battery with the battery port at the base of the heat gun handle.
• Feu lliscar la bateria al port fins que sentiu un clic i encaixi fermament al seu lloc.
• Per treure-la, premeu el botó d'alliberament de la bateria (si n'hi ha) i feu-la lliscar cap a fora.

Imatge 4.1: Lateral view of the heat gun with a 20V battery attached, demonstrating proper battery installation.

4.2 Fixació de la boquilla

The heat gun comes with various nozzles for different applications:

• Reduction Nozzle: For concentrating heat on small areas.
• Boquilla reflectora: For heat shrink tubing or bending plastic pipes.
• Broquet pla: For spreading heat over a wider area, such as paint stripping.

To attach a nozzle:

• Ensure the heat gun is off and cool.
• Slide the desired nozzle onto the heat nozzle until it is firmly seated.
• To remove, pull the nozzle off once the tool has cooled.

Image 4.2: The heat gun shown with a flat nozzle attached, ready for use.

5. Instruccions de funcionament

5.1 Powering On/Off and Temperature/Airflow Settings

The power switch typically has multiple positions to control both power and heat/airflow settings.

• OFF (0): The tool is off.
• Configuració 1: Provides lower temperature (300°C) and lower airflow (100 L/min).
• Configuració 2: Provides higher temperature (550°C) and higher airflow (200 L/min).

Operar:

1. Ensure the battery is installed and a suitable nozzle is attached.
2. Slide the power switch to the desired setting (1 or 2). The tool will begin to heat up.
3. Direct the hot air towards the workpiece, maintaining a safe distance to avoid scorching or damage.
4. After use, slide the power switch to the OFF (0) position.
5. Allow the tool to cool down completely before handling the nozzle or storing.

Imatge 5.1: Part superior view of the heat gun, showing the power switch with its distinct settings.

5.2 Consells generals d'ús

• Always test on a scrap piece of material first to determine the optimal temperature and distance.
• Keep the heat gun moving to prevent overheating a single spot.
• For delicate materials, use the lower temperature setting and maintain a greater distance.

6. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament segur de la pistola de calor.

• Neteja: After each use, ensure the tool is cool. Wipe the exterior with a soft, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
• Reixetes de ventilació transparents: Regularly check and clear the air intake and exhaust vents of any dust or debris to prevent overheating. Use a soft brush or compressed air if necessary.
• Cura del broquet: Clean nozzles after use, ensuring they are free of residue.
• Emmagatzematge: Store the heat gun and its accessories in a dry, clean, and secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed for long-term storage.

Imatge 6.1: Frontal view of the heat gun, highlighting the air vents that require regular cleaning.

7. Solució De Problemes

Si teniu problemes amb la pistola de calor, consulteu els següents problemes i solucions habituals:

Si el problema persisteix després de provar aquestes solucions, poseu-vos en contacte amb l'atenció al client.

8. Especificacions

9. Garantia i Suport

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Total Tools weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

For further assistance, please contact Total customer service.