Manual d'instruccions del sistema de micròfon sense fil ACEMIC G6

1. Producte acabatview

The ACEMIC G6 Wireless Microphone Audio Transmitter and Receiver System is designed to convert any dynamic microphone into a wireless setup, offering high-quality audio transmission with minimal latency. Its compact and lightweight design ensures portability and ease of use.

• High Quality Sound Transmission: Utilizes a 2.4GHz wireless frequency band for high signal stability, low interference, and less than 5ms audio delay. Features 24-bit Audio Resolution with a Sampling Frequency of 48KHz.
• Designed for Dynamic Microphones: Works seamlessly with dynamic microphones, audio mixers, and PA systems. (Note: Not compatible with condenser microphones.)
• Mute Function and 6-Channel Support: A short press of the power button toggles mute on/off. Supports up to 6 channels, allowing 2-3 sets of G6 XLR mic adapters to operate simultaneously without interference.
• 1-Key Operation: Plug and play design with automatic connection after power on.
• Temps d'ús ampliat: Built-in large capacity battery provides up to 6 hours of continuous use after 3-4 hours of charging.
• Llarg rang de transmissió: Offers a transmission range of up to 100ft in open spaces.

Figure 1: ACEMIC G6 Wireless XLR Transmitter and Receiver

Figure 2: Mini Size & Lightweight Design (40g)

2. Contingut del paquet

Si us plau, assegureu-vos que tots els elements estiguin presents al paquet:

• 1x transmissor
• Receptor 1x
• 1x cable de càrrega
• 1 x manual d'usuari

3. Guia de configuració

3.1 Càrrega del dispositiu

Before first use, fully charge both the transmitter and receiver. A full charge typically takes 3-4 hours and provides up to 6 hours of continuous operation.

Figure 3: Charging the ACEMIC G6 (Red light indicates charging, Blue light indicates full charge)

3.2 Power On and Automatic Connection

The G6 system features a simple 1-key operation for power and connection:

1. Long press the power button on both the transmitter (TX) and receiver (RX) to turn them on.
2. The units will automatically connect to each other. The blue indicator light will turn solid when connected.

Figure 4: One-Key Pairing Process

3.3 Connecting to Your Audio Equipment

Once powered on and connected, plug the transmitter and receiver into your desired audio equipment:

• Connecteu el Emissor (TX) directly into your dynamic microphone's XLR output.
• Connecteu el Receptor (RX) into the XLR input of your audio mixer, PA system, or other compatible audio device.

Figure 5: Making your dynamic microphone wireless

For a visual guide on setup and operation, please refer to the official operation video:

4. Instruccions de funcionament

4.1 Funció de silenci

While the device is powered on and connected, a short press of the power button on the transmitter will mute the microphone. Another short press will unmute it. The blue indicator light will blink when muted.

4.2 Using Multiple Sets Simultaneously

The ACEMIC G6 system supports up to 6 channels, allowing 2-3 sets to operate in the same location without interference. For optimal performance when using multiple sets, ensure sufficient distance between the transmitters to avoid signal conflicts.

Figure 6: Supporting 2-3 sets in the same place simultaneously

For detailed instructions on using multiple G6 sets, please refer to the operation guide video provided in the Setup section.

5. Manteniment

• Mantingueu el dispositiu sec i allunyat de la humitat.
• Netegeu la superfície amb un drap suau i sec. No utilitzeu productes químics agressius ni materials abrasius.
• Eviteu exposar el dispositiu a temperatures extremes (calor o fred).
• Emmagatzemar en un lloc fresc i sec quan no s'utilitzi durant períodes prolongats.

6. Solució De Problemes

6.1 Sense so o àudio intermitent

• Comproveu la potència: Ensure both transmitter and receiver are fully charged and powered on (solid blue light).
• Comprova la connexió: Verify that the transmitter is securely plugged into the dynamic microphone and the receiver into the audio input of your mixer/PA system.
• Reemparella els dispositius: If the blue lights are blinking or not solid, long press the power button on both units simultaneously until they flash quickly, then release. They should automatically re-pair.
• Interferència: The 2.4GHz frequency band can be susceptible to interference from Wi-Fi routers, Bluetooth devices, and other 2.4GHz wireless equipment. Try to operate the G6 system away from such sources.
• Interval: Ensure you are within the 100ft transmission range and there are no major obstructions (e.g., thick walls) between the transmitter and receiver.
• Tipus de micròfon: Confirm you are using a dynamic microphone. This system is not compatible with condenser microphones.

6.2 Feedback or Unwanted Noise

• Nivells de guany: Adjust the gain levels on your mixer or PA system. Too much gain can cause feedback.
• Col·locació del micròfon: Ensure the microphone is not too close to speakers or monitors.
• Interferència: As mentioned above, other wireless devices can cause noise. Try changing the operating environment or moving away from potential interference sources.

7. Especificacions

8. Garantia i Suport

ACEMIC products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or visit the official ACEMIC weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.