EPEVER WiFi Adapter Instruction Manual

1. Producte acabatview

The EPEVER WiFi Adapter (Model: EPEVER-WiFi-2.4G-RJ45-D) is designed to enable wireless monitoring and parameter setting for various EPEVER devices, including solar charge controllers, inverters, and hybrid inverter chargers. It facilitates real-time transmission of power generation data to the EPEVER cloud server, allowing users to manage their systems remotely via a mobile application.

Figure 1: EPEVER WiFi Adapter (EPEVER-WiFi-2.4G-RJ45-D)

Característiques principals:

• 2.4G WiFi Networking Communication.
• Works with EPEVER controllers, inverters, or inverter/chargers equipped with an RJ45 port.
• Plug-and-Play with easy setup.
• Communication port powered directly, no external power required.
• Communication distance: Up to 20 meters.
• Supports two working modes: Offline Monitoring and WiFi Data Upload to the Cloud.

2. Especificacions tècniques

Refer to the table below for detailed technical specifications of the EPEVER WiFi Adapter.

Figure 2: Technical Specifications of EPEVER WiFi 2.4G RJ45 D

Nota: L'adaptador WiFi funcionant voltage és de 4.5 V ~ 5.5 V i l'emissió màxima és de 150 mA, que només és adequat per a dispositius que compleixen aquest requisit.

3. Guia de configuració

Follow these steps to set up your EPEVER WiFi Adapter and connect it to the Solar Guardian APP.

3.1. Download and Register the Solar Guardian APP

1. Download the "Solar Guardian" APP from your device's app store.


Figure 3: Solar Guardian APP Download (Scan QR codes for Apple App Store or Google Play)

2. Click "Sign up now" to register an account.
3. Select "Add".
4. Fill in the required information: "site description", "user name", "company" (can be virtual information), and "Phone Number" (must be valid). Then, "Save" the information.

3.2. Configure Network Environment

5. Select "One Click Add" to add "Gateway SN".
6. Primer pas: Click "Access Method" and select "EPEVER WiFi 2.4G RJ45D". Scan the QR code located on the back of the WiFi adapter. Plug the adapter into your EPEVER device's RJ45 communication port.
7. Segon pas: Enter your home WiFi network name and password, then click "Next Step".
8. Pas tres: Click "WiFi Setting" and select the WiFi network corresponding to "HN-EPXXXX" for network configuration. The password for "HN-EPXXXX" is 12345678. Once successful, click "Next".
9. Quatre pas: Click on "Network Switch" to select your home WiFi network. Then, click "Finish".


Figure 4: WiFi Online Mode Configuration Steps

10. You should now see your device on the app page displaying "Online", indicating a successful connection.

4. Instruccions de funcionament

Once connected, the Solar Guardian APP allows you to monitor and manage your EPEVER device remotely.

4.1. Monitorització remota

The app provides real-time data transmission from your EPEVER controller, inverter, or inverter charger to the EPEVER cloud server. You can view various power generation data, system status, and other relevant parameters directly from your mobile phone.

Figure 5: Monitoring Interface in Solar Guardian App

4.2. Configuració de paràmetres

The Solar Guardian APP also supports wireless parameter setting for on-site devices via the cloud server. This allows you to adjust settings of your connected EPEVER equipment remotely, providing flexibility and convenience in managing your solar power system.

5. Compatibilitat

The EPEVER WiFi Adapter is compatible with a range of EPEVER products that feature an RJ45 communication port. These include, but are not limited to:

• Controladors: XTRA, Triron, Tracer-AN (10-40A series)
• Inversors: IPower-Plus, IPT
• Inverter Charger: HP-AL-S
• Solar Hybrid Power System

Figure 6: EPEVER Device Connectivity Options

6. Solució De Problemes

If you encounter issues with your EPEVER WiFi Adapter, consider the following common troubleshooting steps:

• Sense conexió: Ensure the WiFi adapter is securely plugged into the RJ45 port of your EPEVER device. Verify that the EPEVER device is powered on.
• App Not Showing Online: Double-check your home WiFi network name and password entered during setup. Ensure your mobile device is connected to the internet. Try restarting the Solar Guardian APP.
• Incorrect WiFi Password: The default password for the adapter's direct WiFi (HN-EPXXXX) is 12345678. Ensure this is entered correctly during the initial setup phase.
• Interval limitat: The communication distance is up to 20 meters. Ensure the adapter is within range of your WiFi router. Obstacles can reduce signal strength.
• Device Not Supported: Confirm that your EPEVER controller, inverter, or inverter charger has an RJ45 communication port and is listed as a compatible model.

7. Manteniment

The EPEVER WiFi Adapter requires minimal maintenance to ensure optimal performance.

• Neteja: Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• Medi ambient: Operate the adapter within its specified environmental temperature range (-40°C to 85°C) and avoid exposure to excessive moisture or direct sunlight.
• Emmagatzematge: If storing the adapter for an extended period, disconnect it from the EPEVER device and store it in a cool, dry place.

8. Garantia i Suport

For information regarding the warranty of your EPEVER WiFi Adapter, please refer to the warranty card included with your product or visit the official EPEVER website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact EPEVER customer service directly.

EPEVER Official Weblloc: www.epever.com