Brendz LED Cabinet Light with Motion Sensor (Model: CL5001A)

Introducció

Thank you for choosing the Brendz LED Cabinet Light. This product is designed to provide versatile and convenient lighting for various indoor spaces such as cabinets, closets, hallways, and garages. Featuring a motion sensor, USB-C recharging, and adjustable color temperatures, it offers an efficient and adaptable lighting solution. Please read this manual thoroughly before use to ensure proper installation and operation.

Instruccions de seguretat

• No exposeu el dispositiu a l'aigua ni a una humitat excessiva.
• No desmunteu ni intenteu reparar el dispositiu vosaltres mateixos. Contacteu amb l'assistència al client per obtenir assistència.
• Keep away from high temperatures and direct sunlight.
• Feu servir només el cable USB-C proporcionat per carregar.
• This light is intended for indoor use only.
• The light is not designed to replace main lighting but for short-duration illumination in specific areas.

Contingut del paquet

• 2 x Brendz Puyo LED Cabinet Lights (40cm, Silver)
• 2 x USB-C Charging Cables (25cm)
• Mounting Material (Metal plates with 3M adhesive)
• Manual d'usuari

Producte acabatview

The Brendz LED Cabinet Light features a sleek aluminum body, an integrated PIR motion sensor, and a multi-function button for control. It is designed for easy installation and flexible use.

Figura 1: Detallada view of the light's features, including the USB-C charging port, LED charging indicator (red/green), and the ON-OFF-AUTO switch. The light has an ultra-thin 10mm aluminum body.

Configuració i instal·lació

1. Càrrega del dispositiu

Before first use, fully charge the LED cabinet light. Connect the provided USB-C cable to the light's charging port and to a standard USB power adapter (not included). The charging indicator LED will illuminate red during charging and turn green when fully charged. A full charge takes approximately 6 hours.

2. Muntatge de la llum

The Brendz LED Cabinet Light features built-in magnets for easy installation. It comes with metal plates and 3M self-adhesive tape for mounting on non-magnetic surfaces.

1. Prepara la superfície: Clean and dry the desired mounting surface to ensure optimal adhesion.
2. Attach Metal Plates: Peel off the protective film from the 3M adhesive on the metal plates. Firmly press the metal plates onto the cleaned surface at the desired location.
3. Muntar la llum: The light will magnetically attach to the installed metal plates. Ensure it is securely fastened.

Figura 2: Illustration of the easy installation process using the included metal plates and 3M self-adhesive tape, allowing the light to attach magnetically.

Instruccions de funcionament

The light features a multi-function button and a 3-position switch (ON-OFF-AUTO) for various operating modes.

Figura 3: The single control button allows for stepless dimming (long press) and changing color temperature (single press).

1. Power Modes (ON-OFF-AUTO Switch)

• ACTIVITAT: La llum romandrà encesa contínuament.
• DESACTIVAT: La llum s'apagarà.
• AUTOMÀTIC: The light will activate when motion is detected in a dark environment. It will turn off automatically after 25 seconds if no further motion is detected.

Figura 4: The PIR motion sensor detects movement within a 120-degree angle up to 3 meters, activating the light in AUTO mode.

2. Ajust de la temperatura del color

With the light turned ON (either in ON mode or after activation in AUTO mode), press the control button once to cycle through the three available color temperatures:

• 6000K blanc fred
• Blanc neutre 4000K
• 3000K blanc càlid

Figura 5: The light offers three distinct color temperatures to suit different preferences and environments.

3. Stepless Dimming

To adjust the brightness, press and hold the control button. The light intensity will smoothly change between 10% (15 lumens) and 100% (150 lumens). Release the button when the desired brightness is reached. The light features a memory function that recalls the last brightness setting when turned on again.

Figura 6: The stepless dimming feature allows for precise brightness adjustment from 10% to 100% output.

Bateria i càrrega

The Brendz LED Cabinet Light is equipped with an integrated 1100 mAh polymer lithium battery, providing reliable performance.

• Temps de càrrega: Aproximadament 6 hores per a una càrrega completa.
• Durada de la bateria: Up to 10 hours in continuous ON mode, or up to 1500 activations in AUTO (motion sensor) mode on a full charge.

Figura 7: Battery performance details, highlighting the long operational time and charging duration.

Manteniment

• Neteja: Netegeu el llum amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Emmagatzematge: If storing for an extended period, charge the battery fully every 3-6 months to maintain battery health.

Resolució de problemes

Especificacions

Garantia i Suport

Brendz products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.