Introducció
Welcome to your new DEKO Auto Darkening Welding Helmet MZ350T. This manual provides essential information for safe and effective use, setup, operation, and maintenance of your welding helmet. Please read this manual thoroughly before using the product and keep it for future reference.
Informació de seguretat
Precaucions generals de seguretat
- Always wear appropriate personal protective equipment (PPE) when welding.
- Ensure the helmet is correctly adjusted and functioning before each use.
- Do not use the helmet if any part is damaged.
- Protect the lens from scratches and impacts.
- Eviteu l'exposició directa a l'arc de soldadura sense la protecció ocular adequada.
- Mantingueu els nens i les persones no autoritzades allunyats de la zona de soldadura.
Protecció ocular
- This helmet provides protection against harmful UV/IR radiation even in the light state.
- The auto-darkening filter is designed to protect your eyes from intense light during welding.
- Never look directly at a welding arc with an unprotected eye.
Seguretat elèctrica
- Ensure all welding equipment is properly grounded.
- No opereu en condicions humides.
Característiques del producte
- Auto-Darkening Filter: Automatically switches from light to dark in 1/15000 seconds upon arc strike.
- Tecnologia de color veritable: Provides a realistic view of the work area, enhancing clarity and detail.
- Solar Powered with Replaceable Battery: Utilizes solar energy for primary power and a CR2032 lithium battery for backup.
- Adjustable Sensitivity and Delay: Allows customization for different welding processes and environments.
- Variable Shade Control: External knob for adjusting dark shade from DIN 9-13.
- Barreres còmodes: Upgraded adjustable headgear with soft sponge for extended wear.
- Aplicació múltiple: Suitable for MMA, MIG, TIG welding, and Plasma Grinding.
Components acabatsview
Estructura del casc
The DEKO Auto Darkening Welding Helmet consists of the helmet shell, auto-darkening filter (ADF), and adjustable headgear.
Filtre d'enfosquiment automàtic (ADF)
The ADF unit contains the lens display, sensitivity control, delay control, and a replaceable CR2032 lithium battery.
Configuració
Ajust del casquet
The headgear is designed for comfort and stability. Adjust the top strap and angle knob to fit your head securely. Use the fixed knob to adjust tightness for a snug fit.
Battery Installation/Check
The helmet comes with a pre-installed CR2032 battery. Ensure it is properly seated. The solar panel charges the internal system, extending battery life. A low battery indicator will signal when replacement is needed.
Instruccions de funcionament
Encès/Apagat
The helmet is always ready for use due to its solar power and automatic activation. There is no manual on/off switch. It will automatically activate when exposed to light and darken upon arc strike.
Ajust d'ombra
Use the external dark shade knob to select the appropriate shade level (DIN 9-13) for your welding application. Refer to welding standards for recommended shade levels based on ampera i material.
Control de sensibilitat
Adjust the internal sensitivity knob to control how easily the filter reacts to the welding arc. Higher sensitivity is suitable for low ampSoldadura TIG d'alta eficiència, mentre que una menor sensibilitat ajuda a evitar l'activació falsa de la llum ambiental.
Control de retard
Adjust the internal delay knob to set the time the filter remains dark after the welding arc stops. A longer delay is recommended for high amperage welding to protect against afterglow and eye fatigue.
Mode de mòlta
When performing grinding operations, ensure the helmet is set to grinding mode (light state) to prevent the filter from darkening. This is typically achieved by rotating the external knob to the 'Grind' position or by setting the shade to the lightest possible setting (DIN 4).
Manteniment
Neteja del casc
- Clean the helmet shell with mild soap and water. Avoid harsh abrasives or solvents that could damage the material.
- Clean the outer and inner protective lenses with a soft, clean cloth. Do not use abrasive cleaners or rough materials that could scratch the lenses.
Canvi de bateria
The helmet uses a replaceable CR2032 lithium battery. If the low battery indicator appears or the filter fails to darken consistently, replace the battery. To replace, locate the battery compartment on the ADF unit, open it, and insert a new CR2032 battery with the correct polarity (+ side up).
Emmagatzematge
Store the helmet in a dry, clean place away from direct sunlight and extreme temperatures. Prolonged exposure to heat or cold can affect the performance and lifespan of the auto-darkening filter.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Filter does not darken | Bateria baixa | Substituïu la bateria CR2032. |
| Filter does not darken | Arc sensors obstructed | Clean or clear sensors. |
| Filter does not darken | Sensibilitat massa baixa | Augmenta la configuració de sensibilitat. |
| Filter flickers | Sensibilitat massa alta | Redueix la configuració de sensibilitat. |
| Filter flickers | Interferència de la llum ambiental | Adjust sensitivity or work in a less brightly lit area. |
| Poca visibilitat | Protective lenses dirty/scratched | Netegeu o substituïu les lents protectores. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | MZ350T |
| Model de lents | DX-350D |
| View Àrea | 90 x 35mm (3.54" x 1.38") |
| Mida del marc del filtre | 110 x 90mm (4.33" x 3.54") |
| Sensors d'arc | 2 |
| Canvia l'hora | Light to dark in 1/15000s |
| Ajust de retard | 0.1-1.0 segons |
| Control de sensibilitat | Baix-Alt |
| Gamma d'ombres | Light DIN4, Dark Variable 9-13 |
| Enfosquiment automàtic | Sí |
| Color veritable | Sí |
| Font d'alimentació | Lithium Battery + Solar Cells |
| Tipus de bateria | CR2032 substituïble |
| Material del casc | PP |
| Processos de soldadura | MMA, MIG, MAG/CO2, TIG |
| Protecció UV/IR | DIN 16 |
| Classe òptica | 1/1/1/2 |
| Pes de l'article | 710 g |
| Dimensions del producte | 5.08 x 5.08 x 5.08 cm |
Garantia i Suport
For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official DEKO weblloc. Conserveu el rebut de compra per a reclamacions de garantia.