AsperX AX60

AsperX AX60 Portable Tire Inflator User Manual

Model: AX60 | Marca: AsperX

1. Introducció

The AsperX AX60 Portable Tire Inflator is a versatile and compact cordless air compressor designed for quick and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring a digital pressure gauge, automatic shut-off, and an emergency LED light, it provides convenience and reliability for on-the-go inflation needs.

2. Informació de seguretat

  • Llegiu atentament totes les instruccions abans d'utilitzar.
  • Mantenir fora de l'abast dels nens.
  • Do not operate the inflator in wet conditions or near flammable liquids/gases.
  • Ensure the air hose connection is secure before starting inflation.
  • Do not overinflate. Always refer to the recommended pressure for your item.
  • The hose and connection part may become hot after prolonged use. Allow to cool before handling.
  • Guardeu el dispositiu en un lloc fresc i sec quan no l'utilitzeu.

3. Components del producte

The AsperX AX60 Portable Tire Inflator package includes the following items:

Contents of the AsperX AX60 package including the inflator, charging cable, connecting pipe, charging nozzles, storage bag, and user manual.

Image: All components included in the AsperX AX60 Portable Tire Inflator package.

  • AsperX AX60 Air Pump (1)
  • Cable de càrrega tipus C (1)
  • Connecting Pipe (1)
  • Charging Nozzles (4)
  • Bossa d'emmagatzematge (1)
  • Manual d'usuari (1)

4. Configuració

Before first use, ensure the device is fully charged. Connect the Type-C charging cable to the inflator and a suitable USB power source. The battery indicator on the digital display will show charging progress.

Connectar la mànega d'aire

  1. Locate the air hose and the inflation port on the top of the inflator.
  2. Screw the air hose securely onto the inflation port until hand-tight.
  3. Select the appropriate nozzle for the item you wish to inflate and attach it to the other end of the air hose.

5. Instruccions de funcionament

Encès/Apagat

Manteniu premut el botó d'encesa () for a few seconds to turn the inflator on or off.

Comprensió de la pantalla digital

Close-up of the AsperX AX60 digital display showing pressure units PSI, KPA, BAR, and Kg/cm².

Image: The clear digital display of the AsperX AX60, showing various pressure units and battery level.

The 3-inch LCD screen displays the current pressure, target pressure, battery level, and selected inflation mode. You can switch between pressure units (PSI, KPA, BAR, Kg/cm²) by pressing the unit button (U).

Selecció de modes d'inflació

Diagram showing the five preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom Mode.

Image: The five distinct inflation modes available on the AsperX AX60, each with a recommended pressure range.

The AX60 offers 4 preset inflation modes and a manual custom mode:

  • Mode cotxe: For standard car tires (typically 30-42 PSI).
  • Mode de motocicleta: For motorcycle tires (typically 26-43 PSI).
  • Mode bicicleta: For bicycle tires (typically 30-145 PSI).
  • Mode de pilota: For sports balls (typically 7-14 PSI).
  • Custom Mode (Manual): Allows setting pressure between 3-150 PSI.

Premeu el botó de mode (M) per recórrer els modes disponibles.

Setting Target Pressure and Inflating

Four-step visual guide on how to use the AsperX AX60: Connect hose, switch modes, adjust pressure, and start inflation.

Image: Step-by-step guide on connecting the hose, selecting mode, adjusting pressure, and initiating inflation.

  1. Connect the air hose to the item's valve stem.
  2. Premeu el botó de mode (M) to select the desired inflation mode.
  3. Use the "+" and "-" buttons to adjust the target pressure value.
  4. Premeu el botó d'inici () to begin inflation. The inflator will automatically stop once the preset pressure is reached.

Using the Emergency LED Light

Illustration of the built-in LED light on the AsperX AX60 with modes: Normal, SOS, and Strobe.

Image: The multi-functional LED light of the AsperX AX60, useful for dark environments and emergencies.

Premeu el botó de llum (💡) to cycle through the LED light modes: Normal illumination, SOS signal, and Strobe light.

6. Manteniment

Carregant

The built-in rechargeable battery provides long-lasting power. Recharge the device using the provided Type-C cable when the battery indicator shows low power. A full charge allows for continuous operation for approximately 25 minutes.

Neteja i emmagatzematge

  • Netegeu l'exterior de l'inflador amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
  • Assegureu-vos que el dispositiu estigui net i sec abans de guardar-lo.
  • Guardeu l'inflador i els seus accessoris a la bossa d'emmagatzematge proporcionada en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.

Important Note on Heat

It is normal for the part of the hose connected to the machine to become hot after inflation is completed, especially after prolonged use. Please wait a few minutes for the top of the hose to cool down before separating it from the valve stem or the inflator.

7. Solució De Problemes

ProblemaCausa possibleSolució
L'inflador no s'encén.Bateria baixa o sense càrrega.Charge the inflator fully using the provided Type-C cable.
L'inflador s'atura abans d'arribar a la pressió objectiu.Battery too low or device overheated.Recharge the battery. If hot, allow the device to cool down for several minutes before resuming use.
Lectura de pressió inexacta.Hose not securely connected to valve stem or inflator.Ensure all connections are tight. The AX60 uses an advanced smart chip for accuracy within 1%.
Inflació lenta.Inflating a large volume item (e.g., large car tire from flat).This is normal for larger items. The device inflates at 32 liters per minute. For very large items, multiple charging cycles may be needed.
Display shows BAR instead of PSI.Default unit setting.Press the unit button (U) to switch to PSI or your preferred unit.

8. Especificacions

CaracterísticaDetall
Número de modelAX60
MarcaAsperX
Pressió màxima150 PSI
Capacitat de cabal d'aire32 LPM
Tipus de bateriaPolímer de liti (inclòs)
Voltage12 Volts
Mode d'operacióAutomàtic
Dimensions del producte2.6 cm de llargada x 1.6 cm d'amplada x 6.1 cm d'alçada
Pes de l'article1.07 lliures
Nivell de so60 dB
MaterialPlàstic
Característiques especialsPortable, Automatic Shut Off, Digital Display, LED Light

9. Garantia i Suport

The AsperX AX60 Portable Tire Inflator comes with a 2 any de garantia from the date of purchase. For any product inquiries, technical support, or warranty claims, please contact AsperX customer service. Refer to the contact information provided in your product packaging or visit the official AsperX weblloc.

AsperX is committed to providing reliable products and customer satisfaction. We offer lifetime customer and technical support.

Documents relacionats - AX60

Preview Manual d'usuari del compressor d'aire ASPERX AX160 160PSI
Manual d'usuari del compressor d'aire portàtil ASPERX AX160 160PSI. Aprèn sobre les seves característiques, funcionament, càrrega, punts clau, botons, pantalla, especificacions tècniques, preguntes freqüents, avisos, garantia i servei d'atenció al client.
Preview Manual d'usuari del compressor d'aire portàtil Asperx AX70
Manual d'usuari complet per al compressor d'aire portàtil Asperx AX70, que detalla les característiques, el funcionament, les especificacions i les precaucions de seguretat per a l'inflat de pneumàtics, la il·luminació LED i les funcions del banc d'energia.
Preview Manual d'usuari de l'ASPERX AX260: Arrancador amb compressor d'aire
Descobreix l'ASPERX AX260, un arrancador de bateria i compressor d'aire versàtil de 3000 A. Aquest manual d'usuari proporciona informació essencial sobre les seves característiques, funcionament, especificacions tècniques i pautes de seguretat per engegar vehicles de 12 V i inflar pneumàtics.
Preview Texonic AX60/AX120 Mixer AmpManual d'operació del lifier
Operation manual for the Texonic AX60 and AX120 mixer amplifiers, detailing safety, features, connections, operation, specifications, and diagrams for public address systems.