Amazon Basics DS-MA-E02

Amazon Basics Adjustable Dual Computer Monitor Arm Mount

Model: DS-MA-E02

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics Adjustable Dual Computer Monitor Arm Mount. Please read this manual thoroughly before installation and retain it for future reference.

Informació de seguretat

  • Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si és defectuosa.
  • Verify that the mounting surface (desk) can safely support the combined weight of the mount and two monitors.
  • No supereu la capacitat màxima de pes de 22 lliures (10 kg) per braç.
  • Follow all installation steps carefully. Improper installation may result in product damage or personal injury.
  • Mantingueu els nens i les mascotes allunyats durant la instal·lació.

Contingut del paquet

Verifiqueu que totes les peces que s'enumeren a continuació s'inclouen al paquet:

  • Pol central
  • Monitor Arms (2)
  • Plaques VESA (2)
  • C-Clamp Maquinari de muntatge
  • Maquinari de muntatge de grommet
  • Clips de gestió de cables
  • Assorted Screws and Tools for Assembly
All components of the Amazon Basics Dual Monitor Arm Mount laid out.

Imatge: A flat lay image displaying all components included in the package: the central pole, two monitor arms, VESA plates, desk mounting hardware (C-clamp and grommet parts), cable management clips, and various screws and tools.

Especificacions

MarcaConceptes bàsics d'Amazon
Número de modelDS-MA-E02
Capacitat de pesFins a 10 kg per braç
Mida de monitor compatibleFins a 32 polzades
Compatibilitat VESA75x75mm, 100x100mm
Interval d'inclinació-45° a +90°
Gamma giratòria+/-90°
Rotació360°
Extensió màxima31.17 polzades (79.17 cm)
Altura màx16.75 polzades (42.55 cm)
Tipus de muntatgeTabletop (C-Clamp o Ullera)
Gruix de l'escriptori (C-Cl)amp)0.39 - 4.25 polzades (1 - 10.8 cm)
Hole Diameter (Grommet)0.51 - 2.36 polzades (1.29 - 6 cm)
MaterialAcer d'aliatge
ColorNegre
Diagram showing monitor arm compatibility details.

Imatge: An image illustrating the wide compatibility of the monitor arm, highlighting a maximum weight capacity of 22 lbs (10 kg) per arm, VESA sizes of 75x75mm and 100x100mm, and support for screens up to 32 inches.

Configuració i instal·lació

El braç del monitor ofereix dos mètodes d'instal·lació: C-clamp mount or grommet mount.

1. Trieu la vostra opció de muntatge

  • C-Clamp Muntatge: Ideal for desks without pre-drilled holes. Attaches to the edge of desks with a thickness between 0.39 and 4.25 inches (1 - 10.8 cm).
  • Muntatge de grommet: Suitable for desks with existing holes. Requires a hole diameter between 0.51 and 2.36 inches (1.29 - 6 cm).
Diagram showing grommet and clamp mount installation options.

Imatge: An image detailing the two installation options: a grommet mount for desks with a pre-drilled hole and a C-clamp mount for desk edges.

2. Assemble the Base

  1. Attach the central pole to your chosen base (C-clamp or grommet) according to the specific instructions provided in the hardware kit.
  2. Securely fasten the base to your desk. Ensure it is tight and stable.

3. Attach Monitor Arms

  1. Slide the monitor arms onto the central pole.
  2. Adjust the height of the arms to your desired position and tighten the locking mechanism.

4. Mount Monitors

  1. Fixeu les plaques VESA a la part posterior dels monitors amb els cargols proporcionats. Assegureu-vos que els cargols siguin compatibles amb els forats de muntatge VESA del monitor (75 x 75 mm o 100 x 100 mm).
  2. Carefully slide the monitors (with VESA plates attached) onto the monitor arms. Secure them in place with the locking screws.
Amazon Basics Dual Monitor Arm Mount, front view.

Imatge: The Amazon Basics Dual Monitor Arm Mount in black, showing the central pole, two adjustable arms, and VESA plates, ready for monitor attachment. The desk clamp is visible at the base.

Two monitors mounted on the Amazon Basics Dual Monitor Arm Mount.

Imatge: A view from behind two monitors, showing them securely attached to the dual monitor arm mount, demonstrating a typical setup.

Operating and Adjusting the Monitor Arm

The monitor arm allows for flexible positioning of your screens to optimize your viewexperiència.

Ajustaments:

  • Ajust d'alçada: Loosen the locking mechanism on the central pole to slide the arms up or down. Retighten to secure.
  • Inclinació: Adjust the monitor's vertical angle from -45° to +90° to reduce glare and improve viewcomoditat.
  • Girar: Rotate the monitor +/-90° horizontally to share your screen or change viewangles d'ajust.
  • Rotació: Pivot the monitor 360° to switch between landscape and portrait orientations.
  • Extensió del braç: Extend or retract the arms up to 31.17 inches (79.17 cm) to bring monitors closer or push them further away.
Diagram showing flexible screen adjustment options.

Imatge: An illustration demonstrating the flexible adjustment capabilities of the monitor arm, including 180-degree arm rotation, 360-degree pivot, tilt from -45° to +90°, +/-90° swivel, and 360° rotation for monitors.

Diagram showing monitor arm dimensions and adjustment range.

Imatge: Un costat view of the monitor arm with a monitor attached, indicating key dimensions: 31.17 inches (79.17 cm) extension range, 18.09 inches (45.95 cm) arm length, and 16.75 inches (42.55 cm) height adjustment.

Gestió de cables:

Utilize the included cable management clips to route and organize your monitor cables along the arms and pole. This helps maintain a tidy workspace and prevents cable damage.

Manteniment

  • Neteja: Wipe the monitor arm with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Comprovacions periòdiques: Regularly check all screws and connections to ensure they remain tight and secure. Retighten as necessary.
  • Lubricació: No lubrication is required for this product.

Resolució de problemes

Problem: Monitor arm is unstable or wobbles.
Solució: Assegureu-vos que l'escriptori clamp or grommet mount is securely tightened to the desk. Check that all connections on the arms and VESA plates are fastened properly. Verify that the monitor weight does not exceed the maximum capacity of 22 lbs (10 kg) per arm.
Problem: Monitor does not stay in desired position (e.g., tilts down).
Solució: The tension for tilt or swivel might need adjustment. Refer to the specific instructions in your hardware kit for adjusting tension screws on the VESA plate or arm joints. Use the provided tools to tighten these adjustments until the monitor holds its position.
Problem: Difficulty in adjusting height.
Solució: Loosen the height adjustment knob or lever on the central pole before attempting to move the arms. Ensure no cables are snagged, preventing movement. Retighten after adjustment.

Garantia i Suport

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics website. Contact information for customer service is typically available on the product packaging or the brand's support pages.

© 2025 Amazon Basics. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.