BSIDE S10+X1

BSIDE S10+X1 Smart Digital Multimeter and Voltage Detector Pen Kit User Manual

1. Introducció

Thank you for choosing the BSIDE S10+X1 Smart Digital Multimeter and Voltage Detector Pen Kit. This kit provides two powerful electrical testing tools designed for both professional electricians and DIY enthusiasts. The BSIDE S10 Smart Multimeter offers automatic measurement capabilities for various electrical parameters, while the BSIDE X1 Voltage Detector Pen provides non-contact voltage detection and live wire identification. This manual will guide you through the proper setup, operation, maintenance, and troubleshooting of your new devices.

2. Informació de seguretat

Always observe basic safety precautions when using electrical testing equipment to reduce the risk of fire, electric shock, or personal injury. Read all instructions carefully before use.

  • No supereu els valors d'entrada màxims especificats per a cada funció.
  • Assegureu-vos que els cables de prova estiguin en bon estat i connectats correctament abans de fer mesures.
  • No utilitzeu el dispositiu si sembla que està danyat o funciona de manera anormal.
  • Always remove test leads before opening the battery compartment.
  • Aneu amb compte quan treballeu amb volumtages above 30V AC RMS, 42V peak, or 60V DC, as they pose a shock hazard.
  • Mantingueu els dits darrere dels protectors de dits de les sondes de prova durant les mesures.
  • Canvieu les piles immediatament quan aparegui l'indicador de bateria baixa.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre kit:

  • 1 x BSIDE S10 Smart Digital Multimeter
  • 1 x BSIDE X1 Voltage Detector Pen
  • 2 x Test Leads (for S10)
  • 1 x Carrying Case (for S10)
  • 2 piles AAA (incloses)
  • 1 manual d'usuari (anglès)

4. Producte acabatview

4.1 BSIDE S10 Smart Digital Multimeter

The BSIDE S10 is an intelligent auto-ranging multimeter designed for ease of use. It features a large EBTN color display that shows test values, analog bars, and frequency simultaneously. Key functions include automatic testing of AC/DC voltage, resistance, continuity, frequency, and battery. Side buttons allow for capacitance, diode, and duty cycle measurements. It also includes non-contact voltage detection (NCV) and a bright LED flashlight.

BSIDE S10 Multimeter with a vibrant color LCD screen displaying voltage, frequency, and NCV detection indicators.

Figure 1: BSIDE S10 Multimeter with Color LCD Screen.

Close-up of the BSIDE S10 Multimeter's 3.5-inch ultra-large HD display.

Figure 2: BSIDE S10 Multimeter's Super Large LCD.

4.2 BSIDE X1 Voltage Detector Pen

The BSIDE X1 is a versatile voltage detector pen with an EBTN LCD screen displaying test results, analog bars, and frequency. It features adjustable NCV sensitivity for precise identification of complex lines or safer detection of embedded wires. An 8-LED indicator in 3 colors helps differentiate voltage intensity. It can identify live/neutral wires and locate break points. It also performs automatic AC/DC voltage, resistance, frequency, and continuity tests.

BSIDE X1 Vol.tage Detector Pen with its bright LED flashlight illuminated, showing its utility in dark environments.

Figure 3: BSIDE X1 Voltage Detector Pen with LED Flashlight.

Close-up of the BSIDE X1 Voltage Detector Pen's 8 LED indicators showing different voltage intensity levels (Low, Mid, High).

Figure 4: BSIDE X1 Voltage Detector Pen's 8 LED Indicators.

5. Configuració

5.1 Instal·lació de la bateria

Both the BSIDE S10 Multimeter and BSIDE X1 Voltage Detector Pen require 2x AAA batteries for operation. To install:

  1. Localitzeu la tapa del compartiment de la bateria a la part posterior del dispositiu.
  2. Utilitzeu un tornavís per obrir la coberta.
  3. Introduïu 2 piles AAA, assegurant-vos de la polaritat correcta (+/-).
  4. Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.

5.2 Connecting Test Leads (for BSIDE S10)

For most measurements with the BSIDE S10, you will need to connect the test leads:

  • Inseriu el vermell cable de prova a la ENTRADA jack.
  • Inseriu el negre cable de prova a la COM (common) jack.

6. Instruccions de funcionament

Both devices default to intelligent auto-ranging mode upon power-on, simplifying measurements.

6.1 BSIDE S10 Smart Digital Multimeter

To power on/off, press and hold the power button. The S10 automatically detects the measurement type (AC/DC voltage, resistance, continuity, frequency, battery) in smart mode. Use the side buttons to access specific functions like capacitance, diode, and duty cycle.

BSIDE S10 Multimeter measuring DC voltage of a car battery with red and black test leads connected.

Figura 5: Mesura de CC Voltage with BSIDE S10.

BSIDE S10 Multimeter measuring AC voltage from a circuit breaker, displaying 220.6V and 50.00Hz.

Figura 6: Mesura del volum de CAtage with BSIDE S10.

VoltagMesura (CA/CC)

In smart mode, connect the test leads across the circuit or component to measure voltage. The device will automatically detect AC or DC voltage and display the reading along with frequency for AC measurements.

Mesura de Resistència

In smart mode, connect the test leads across the resistor. The S10 will display the resistance value in Ohms (Ω), Kilo-ohms (kΩ), or Mega-ohms (MΩ).

Prova de continuïtat

In smart mode, touch the test leads to the two points you want to check for continuity. A continuous beep indicates a complete circuit (low resistance).

Prova de díode

Use the side button to select diode test mode. Connect the red lead to the anode and the black lead to the cathode of the diode. The forward voltagEs mostrarà una gota.

Mesura de la capacitat

Use the side button to select capacitance mode. Connect the test leads to the capacitor terminals. The capacitance value will be displayed in Farads (F), microfarads (µF), or nanofarads (nF).

Mesura de freqüència

In smart mode, when measuring AC voltage, the frequency will also be displayed. For dedicated frequency measurement, use the appropriate mode if available via side buttons.

NCV (vol sense contacte).tage) Detecció

The S10 features NCV detection. Bring the top of the multimeter close to a live wire or electrical outlet. The device will indicate the presence of AC voltagi sense contacte físic.

Detecció de cable en directe

Using a single test lead (typically the red one), the S10 can identify live wires. The display will show "LIVE" and indicate the presence of live voltage.

6.2 BSIDE X1 Voltage Detector Pen

To power on/off, press the red power button. The X1 also defaults to auto-ranging mode. Use the blue button to adjust NCV sensitivity or switch between functions.

BSIDE X1 Vol.tage Detector Pen detecting non-contact voltage near a circuit breaker, showing NCV on its screen and illuminated LED indicators.

Figure 7: NCV Detection with BSIDE X1.

BSIDE X1 Vol.tage Detector Pen measuring AC voltage with test leads connected to a circuit breaker, displaying 389V and 50.0Hz.

Figura 8: Mesura del volum de CAtage with BSIDE X1.

NCV (vol sense contacte).tage) Detecció

Bring the tip of the X1 close to a wire or outlet. The device will beep and the LED indicators will light up, with more LEDs indicating higher voltage intensity. Press the blue button to switch between high and low sensitivity modes.

Live/Neutral Wire Identification

Insert the tip of the X1 into an outlet slot. The live wire will trigger a stronger indication (more LEDs, faster beeping) compared to the neutral wire.

Break Point Location

Run the X1 along an insulated wire. The NCV detection will stop at the point where the wire is broken.

Funció de llanterna

Both devices are equipped with an LED flashlight for illumination in dark working conditions. Refer to the device-specific instructions for activating the flashlight.

6.3 Vídeo oficial del producte

Video 1: A comprehensive demonstration of the BSIDE S10 Smart Multimeter and BSIDE X1 Voltage Detector Pen, showcasing unboxing, features, and various measurement capabilities including voltage, resistance, continuity, diode, capacitance, frequency, NCV, and live wire detection.

7. Manteniment

To ensure long-term performance and accuracy of your devices:

  • Neteja: Wipe the devices with a dry, soft cloth. Do not use abrasive cleaners or solvents.
  • Substitució de la bateria: Canvieu les piles quan aparegui l'indicador de bateria baixa a la pantalla. Consulteu la secció 5.1 per obtenir instruccions d'instal·lació de la bateria.
  • Emmagatzematge: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
  • Calibració: Accuracy is typically maintained for one year. For professional use, periodic calibration may be required.

8. Solució De Problemes

If you encounter issues with your BSIDE S10+X1 kit, refer to the following common problems and solutions:

  • El dispositiu no s'encén: Comproveu la instal·lació de les piles i assegureu-vos que no estiguin esgotades. Substituïu-les si cal.
  • No hi ha lectura o es mostra "OL" (sobrecàrrega): Ensure test leads are properly connected and making good contact with the circuit. Verify that the measurement range is appropriate for the value being measured (though auto-ranging should handle most cases).
  • Lectures inexactes: Check battery level. Ensure the device is used within specified environmental conditions (temperature, humidity).
  • NCV/Live detection is inconsistent: Adjust NCV sensitivity using the blue button on the BSIDE X1. Ensure there are no strong electromagnetic fields interfering with the measurement.

Per a més ajuda, poseu-vos en contacte amb l'atenció al client.

9. Especificacions

9.1 Especificacions generals

  • Fabricant: BSIDE
  • Model: S10+X1 Kit Multimètre
  • Font d'alimentació: Battery powered (2x AAA included)
  • Dimensions (S10): 14.8 x 6.9 x 4.5 cm
  • Pes (S10): 180 g
  • Weight (X1): 93 g
  • Compliment de seguretat: Certificat CE

9.2 Measurement Specifications (BSIDE S10)

  • DC Voltage Precisió: 0.001 V
  • Tipus de mesura: Multimeter, Ohmmeter, Voltmeter, Capacimeter, Continuity Tester
  • Visualització: EBTN Color LCD with 3 test results (Value, Analog Bars, Hertz)
  • Característiques: Auto-ranging, Auto power-off, Data hold, Low battery indication, LED flashlight, Ambient temperature display.

9.3 Measurement Specifications (BSIDE X1)

  • Visualització: EBTN LCD with 3 test results (Value, Analog Bars, Hertz)
  • Característiques: NCV with adjustable sensitivity, 8-LED indicator (3 colors), Live/Neutral wire identification, Break point location, Auto AC/DC voltage, resistance, frequency, continuity test.

10. Garantia i Suport

Your BSIDE S10+X1 Smart Digital Multimeter and Voltage Detector Pen Kit comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims.

  • For detailed warranty information, refer to the documentation provided with your purchase.
  • A PDF version of this manual in French is available via email upon request.
  • For technical support or service inquiries, please contact our 24/7 customer service.