Introducció
Thank you for choosing the FLEX 24V 280W Lithium-Ion Battery Rapid Charger. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your charger. Designed for speed and durability, this charger ensures your FLEX 24V batteries are ready when you are, minimizing downtime with its advanced charging technology and dual fan cooling system.
Informació de seguretat
AVÍS: Llegiu tots els avisos de seguretat i totes les instruccions abans d'utilitzar aquest producte. Si no seguiu els avisos i les instruccions, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
- Do not expose the charger to rain or wet conditions. Water entering a battery charger will increase the risk of electric shock.
- Use only with specified FLEX 24V Lithium-Ion battery packs. Charging other battery packs may cause them to burst, leading to personal injury and damage.
- Do not charge damaged battery packs. If a battery pack is damaged, it must be replaced.
- Keep the charger away from heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplificadors) que produeixen calor.
- Desendolleu el carregador de la presa de corrent quan no l'utilitzeu o abans de netejar-lo.
- Do not operate the charger with a damaged cord or plug. If damaged, have it repaired by a qualified service person.
- No desmunteu el carregador. Porteu-lo a una persona de servei qualificada quan calgui reparació o reparació. El muntatge incorrecte pot provocar un risc de descàrrega elèctrica o incendi.
Producte acabatview
The FLEX 24V 280W Rapid Charger (FX0421-Z) is engineered for efficient and fast charging of your FLEX 24V batteries. Its robust design includes intelligent processing and dual fan cooling to optimize charging performance and battery longevity.
Figura 1: De dalt a baix view of the FLEX 24V 280W Rapid Charger, showing the battery slot and indicator lights.
Figura 2: Angle view of the FLEX 24V 280W Rapid Charger, highlighting the indicator panel.
Figure 3: Diagram illustrating the internal components of the FLEX charger, emphasizing the dual fan cooling system for faster charging.
Figure 4: Visual representation of FLEX battery technology, highlighting Therma-Tech™ Heat Management, Power IQ, and resistance to drop, dust, and water.
Característiques principals:
- 280W Rapid Charging: Delivers fast charging speeds for minimal downtime.
- Dual Fan Technology: Actively cools the charger and battery during operation to prevent overheating and extend lifespan.
- Smart Charge Gauge: Clear indicator lights show charging status (Full Charge, 80% Charge, Charging, High Temp/Error).
- Battery Lock System: Ensures secure connection and prevents accidental disconnection.
- Muntatge a la paret: Designed for convenient storage and accessibility.
- FLEX 24V Cross-Compatibility: Works seamlessly with all FLEX 24V batteries and tools.
Configuració
- Desembaleu el carregador: Carefully remove the charger and any packaging materials from the box. Inspect for any damage.
- Col·locació: Place the charger on a stable, flat, and dry surface. Ensure adequate ventilation around the charger. The charger can also be wall-mounted using appropriate fasteners (not included) through the designated mounting holes on the back.
- Connecteu-vos a l'alimentació: Plug the charger's power cord into a standard 120V AC electrical outlet. The indicator lights may briefly illuminate upon connection.
Instruccions de funcionament
Càrrega d'una bateria:
- Assegureu-vos que el carregador estigui connectat a una presa de corrent activa.
- Align the FLEX 24V battery pack with the charging slot on the charger.
- Slide the battery pack firmly into the slot until it clicks securely into place. The battery lock system will engage.
- The charger's indicator lights will illuminate to show the charging status. The cooling fans may activate during charging.
- Once charging is complete, the 'Full Charge' indicator will light up.
- To remove the battery, press the release tabs on the sides of the battery pack and slide it out of the charger.
Llums indicadores de càrrega:
| Indicador | Estat |
|---|---|
| Verd (sòlid) | Càrrega completa |
| Verd (intermitent) | 80% de càrrega |
| Green (Scrolling) | Carregant |
| Vermell (sòlid) | High Temperature / Error |
Temps de càrrega aproximats:
Figure 5: Table showing approximate charging times for various FLEX 24V Lithium-Ion batteries.
- 24V 2.5Ah Lithium: Approximately 30 Minutes
- 24V 5.0Ah Lithium: Approximately 30 Minutes
- 24V 8.0Ah Lithium: Approximately 50 Minutes
- 24V 12.0Ah Lithium: Approximately 75 Minutes
*Charging times may vary based on battery condition, ambient temperature, and power source.
Compatibilitat del producte:
Figure 6: An array of FLEX 24V tools and batteries, demonstrating their 100% cross-compatibility.
The FLEX 24V 280W Rapid Charger is designed to be 100% cross-compatible with all FLEX 24V batteries, chargers, and tools, ensuring a versatile and efficient power system for your projects.
Manteniment
- Neteja: Disconnect the charger from the power supply before cleaning. Use a soft, damp cloth to wipe down the exterior of the charger. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic components.
- Emmagatzematge: Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure the charger is unplugged when not in use for extended periods.
- Inspecció: Periodically inspect the power cord and charger housing for any signs of damage. If any damage is found, do not use the charger and contact FLEX customer support for assistance.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El carregador no s'encén | No power to the outlet; Damaged power cord/plug | Check if the outlet is live by plugging in another device. Inspect the power cord and plug for damage. |
| Battery not charging (no indicator lights) | Battery not properly seated; Battery is too hot/cold; Battery is damaged | Ensure the battery is fully inserted and clicks into place. Allow battery to reach room temperature (40°F - 104°F / 4°C - 40°C). If battery is damaged, replace it. |
| Red (Solid) indicator light | High temperature or other error | Remove the battery and allow both the battery and charger to cool down in a well-ventilated area. Reinsert the battery. If the error persists, contact customer support. |
Especificacions
- Número de model: FX0421-Z
- Dimensions del producte: 7.3 x 7.6 x 3.7 polzades (18.5 x 19.3 x 9.4 cm)
- Pes de l'article: 2.33 lliures (1.06 kg)
- Vol. De sortidatage: 24 Volts
- Potència de sortida: 280W
- Color: Gris/negre
- Compliment: Certificació Energy Star
Garantia i Suport
FLEX Limited Lifetime Warranty: Register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2025, at registermyFLEX.com to receive a limited lifetime warranty. Please refer to the official FLEX weblloc per conèixer els termes i condicions de la garantia completa.
Atenció al client: For technical assistance, service, or replacement parts, please visit the official FLEX website or contact their customer service department. Always provide your product model number (FX0421-Z) when seeking support.
Vídeos oficials de productes
En aquest moment no hi ha vídeos oficials del venedor disponibles per a aquest model específic.
