FOHERE Meat Grinder MG-3250R Instruction Manual

1. Instruccions de seguretat importants

Please read all instructions carefully before using the FOHERE Meat Grinder. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the appliance is unplugged before assembling, disassembling, or cleaning.
• Do not operate the appliance continuously for more than 5 minutes. Allow a 10-minute rest period between cycles to prevent overheating.
• Keep hands and utensils out of the feed tube during operation to prevent injury. Always use the food pusher.
• Do not grind bones, nuts, or other hard foods as this may damage the motor or grinding components.
• Assegureu-vos que totes les peces estiguin correctament muntades abans d'endollar i fer funcionar el molinet.
• Aquest aparell només és per a ús domèstic. No utilitzar a l'aire lliure.
• No submergiu la unitat del motor en aigua o altres líquids.
• Mantenir l'aparell fora de l'abast dels nens.
• Si el cable d'alimentació està danyat, l'ha de substituir el fabricant, el seu agent de servei o persones qualificades de manera similar per evitar perills.

2. Producte acabatview i Components

Familiarize yourself with the parts of your FOHERE Meat Grinder MG-3250R.

Figura 2.1: FOHERE Meat Grinder MG-3250R with its various attachments including grinding plates, sausage stuffer tubes, kubbe maker, meat claws, and burger press.

Components principals:

• Unitat motora: The main body containing the motor and control panel.
• Hopper Plate: Tray for holding meat before grinding.
• Capçal de rectificat: The assembly where meat is processed.
• Feed Screw (Auger): Pushes meat through the grinding plates.
• Fulla de tall: Cuts meat against the grinding plate.
• Plaques de mòlta: Three sizes (Fine, Medium, Coarse) for different textures.
• Anell de fixació: Assegura els components del capçal de mòlta.
• Empenyedor d'aliments: For safely feeding meat into the grinder.

Accessoris inclosos:

• Sausage Stuffer Tubes: Two sizes (0.7 inch, 0.9 inch) for making sausages.
• Kubbe Maker Attachment: For preparing Kubbe.
• Meat Claws: For shredding meat. (Stored in the accessory box upon first receipt).
• Burger Press: For shaping burger patties.
• Accessory Storage Box: Integrated into the unit for convenient storage of small parts.

3. Muntatge i muntatge

Follow these steps to assemble your meat grinder before first use.

1. Desembalar: Traieu amb cura tots els components de l'embalatge.
2. Neteja: Wash all detachable parts (grinding head, feed screw, cutting blade, grinding plates, fixing ring, hopper plate, food pusher, and all accessories) in warm soapy water. Rinse thoroughly and dry completely. The motor unit should only be wiped with a damp tela.
3. Attach Grinding Head: Insert the grinding head into the motor unit opening, ensuring it is securely locked in place.
4. Insert Feed Screw: Place the feed screw (auger) into the grinding head.
5. Position Cutting Blade: Place the cutting blade onto the square shaft of the feed screw, ensuring the sharp edges face outwards towards the grinding plate.
6. Seleccioneu la placa de mòlta: Choose the desired grinding plate (fine, medium, or coarse) and place it over the cutting blade.
7. Secure with Fixing Ring: Screw the fixing ring onto the grinding head until it is hand-tight. Do not overtighten.
8. Attach Hopper Plate: Place the hopper plate on top of the grinding head.

Figura 3.1: The FOHERE Meat Grinder fully assembled and ready for use, showing the motor unit, grinding head, and hopper plate.

4. Instruccions de funcionament

Ensure the grinder is properly assembled and plugged into a suitable power outlet (120V).

4.1 General Meat Grinding

1. Prepare Meat: Cut meat into small pieces (approximately 1-inch cubes) that will easily fit into the feed tube. Remove any bones, large tendons, or excessive fat.
2. Place Hopper Plate: Ensure the hopper plate is securely in place.
3. Seleccioneu la velocitat: Turn the control switch to "ON 1" for normal grinding or "ON 2" for faster grinding.
4. Feed Meat: Place meat pieces onto the hopper plate and gently feed them into the feed tube using the food pusher. Do not force meat into the grinder.
5. Collect Ground Meat: Col·loqueu un bol o recipient sota el capçal de mòlta per recollir la carn picada.
6. Atura l'operació: When finished, turn the control switch to "STOP & RESET" and unplug the appliance.

Figura 4.1: The FOHERE Meat Grinder actively processing meat, demonstrating the output of freshly ground meat into a collection bowl.

4.2 Making Sausages

1. Assemble for Sausage: After grinding meat, replace the cutting blade and grinding plate with the sausage stuffer tube attachment. Secure with the fixing ring.
2. Prepara Casing: Remulla c naturalasings in warm water for at least 30 minutes, then rinse thoroughly. Slide the casing onto the sausage stuffer tube, leaving a small overhang.
3. Stuff Sausages: Turn the grinder to "ON 1" or "ON 2". Feed the prepared ground meat into the hopper. Guide the casing as it fills, ensuring it fills evenly without air pockets.
4. Link Sausages: Un cop el casing is filled, twist it at desired intervals to create links.
5. Atura l'operació: Turn the control switch to "STOP & RESET" and unplug.

Figura 4.2: The FOHERE Meat Grinder equipped with the sausage stuffer attachment, demonstrating the process of filling sausage casings.

4.3 Making Kubbe

1. Assemble for Kubbe: Replace the cutting blade and grinding plate with the Kubbe maker attachment. Secure with the fixing ring.
2. Prepare Kubbe Dough: Use your prepared Kubbe dough mixture.
3. Form Kubbe: Turn the grinder to "ON 1" or "ON 2". Feed the Kubbe dough into the hopper. The attachment will form hollow tubes.
4. Cut and Fill: Cut the hollow tubes to desired lengths and fill them with your chosen filling.
5. Atura l'operació: Turn the control switch to "STOP & RESET" and unplug.

Figura 4.3: The FOHERE Meat Grinder configured with the Kubbe attachment, illustrating the creation of hollow Kubbe shells.

4.4 Using the Burger Press

The burger press is a manual accessory used after meat has been ground.

1. Prepare Ground Meat: Ensure your meat is ground to the desired consistency.
2. Shape Patties: Place a portion of ground meat into the burger press. Press down firmly to form a uniform patty.
3. Remove Patty: Carefully remove the shaped patty from the press.

Figura 4.4: A burger press in use, demonstrating how to form a perfectly shaped meat patty from ground meat.

4.5 Using Meat Claws

Meat claws are manual tools for shredding cooked meat.

1. Prepare Cooked Meat: Ensure meat is cooked and cooled enough to handle.
2. Shred Meat: Use the meat claws to grip and shred the cooked meat.

Figura 4.5: Meat claws being used to shred cooked chicken, illustrating their function for preparing pulled meats.

5. Manteniment i Neteja

Proper cleaning and maintenance will extend the life of your FOHERE Meat Grinder.

1. Desconnectar: Desconnecteu sempre l’aparell de la presa de corrent abans de netejar-lo.
2. Desmuntar: Disassemble the grinding head, feed screw, cutting blade, grinding plate, fixing ring, and hopper plate.
3. Rentat només a mà: The grinding head, hopper plate, feed screw, and fixing ring are NOMÉS RENTAT DE MANS. Wash them in warm soapy water, rinse thoroughly, and dry immediately to prevent rust.
4. Peces aptes per al rentavaixelles: Blades, grinding plates, sausage tubes, and plastic accessories (BPA-free) can be placed in the dishwasher.
5. Unitat motora neta: Netegeu l'exterior de la unitat del motor amb anunciamp tela. No submergiu la unitat del motor a l'aigua.
6. Emmagatzematge: Ensure all parts are completely dry before reassembling or storing. Store small accessories in the integrated storage box.

Figura 5.1: Illustration of which parts of the FOHERE Meat Grinder are dishwasher safe (blades, plates, sausage tubes, plastic accessories) and which require hand washing (grinding head, hopper plate, feed screw, fixing ring).

6. Solució De Problemes

Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.

7. Especificacions

• Model: MG-3250R
• Marca: FORA
• Max Locking Power: 3000W
• Potència nominal: 500W
• Potència: 0.65 CV
• Voltage: 120 V
• Capacitat de sortida: Up to 4 lbs (1.8 kg) of minced meat per minute
• Dimensions del producte: 13.38 x 13.38 x 9.8 polzades
• Pes de l'article: 5 lliures
• Grinding Head Size: #12
• Accessoris inclosos: 3 Grinding Plates (Fine, Medium, Coarse), 2 Sausage Stuffer Tubes (0.7in, 0.9in), Kubbe Maker, Meat Claws, Burger Press.

8. Garantia i atenció al client

FOHERE provides professional customer service, coverage on parts and performance, and lifelong technical support for your Meat Grinder MG-3250R.

If you encounter any problems or have questions regarding your product, please contact FOHERE customer service for assistance. Please have your model number (MG-3250R) and purchase information ready when contacting support.

For more information or to contact support, please visit the official FOHERE store or weblloc.

Visit the FOHERE Store on Amazon