1. Producte acabatview
The RWRAPS TC5-S is a 48x48mm universal input PID temperature controller designed for precise temperature regulation in various industrial and scientific applications. It features dual display for both Fahrenheit and Celsius, multiple control methods including PID and ON/OFF, and flexible output options such as SSR or Relay. This manual provides essential information for the safe and effective operation of your device.
Figura 1: Davant view of the RWRAPS TC5-S PID Temperature Controller displaying a Celsius temperature setting.
2. Especificacions
| Característica | Especificació |
|---|---|
| Font d'alimentació | 100-240VAC, 50/60Hz |
| Mida del panell | 48x48mm |
| Mida del forat obert | 45x45mm |
| Precisió | ±0.5% FS |
| Mètode de control | PID or ON/OFF |
| Tipus d'entrada | TC/RTD (K, J, R, S, B, E, N, T, PT100, CU50 adjustable), 4-20mA, 0-20mA, 0-5V, 1-5V |
| Tipus de sortida | SSR or Relay (as per selected model), 4-20mA (as per selected model) |
| Alarma | 1 alarm or 2 alarms (12 types available) |
| Mostra | Fahrenheit o Celsius |
| Pes de l'article | 10.6 unces |
| Dimensions del paquet | 1.18 x 0.79 x 0.39 polzades |
3. Configuració i instal·lació
Proper installation is crucial for the performance and safety of the TC5-S controller. Ensure all power is disconnected before proceeding with installation.
3.1 Muntatge en panell
- Cut a 45x45mm square opening in the desired panel.
- Insert the TC5-S controller into the opening from the front.
- Secure the controller using the provided mounting brackets from the rear.
3.2 Esquema de cablejat
Refer to the wiring diagram on the side of the unit for correct connections. Ensure all connections are secure and comply with local electrical codes.
Figura 2: lateral view of the controller showing the wiring diagram and terminal connections. This diagram illustrates connections for power supply (100-240VAC), input (TC/RTD), and output (SSR/Relay, mA).
- Font d'alimentació: Connect 100-240VAC, 50/60Hz to terminals 1 and 2.
- Entrada: Connect your temperature sensor (thermocouple or RTD) to the designated input terminals (e.g., 8, 9, 10 for TC/RTD).
- Sortida: Connect your control device (SSR or Relay) to the output terminals (e.g., 3, 4, 5 for Relay/SSR output).
- Alarma: Connect alarm devices to terminals 6 and 7.
Figura 3: posterior view of the RWRAPS TC5-S PID Temperature Controller, highlighting the screw terminal blocks for electrical connections.
4. Instruccions de funcionament
The TC5-S controller is designed for straightforward operation. The front panel features a dual display and four control buttons.
Figura 4: Davant view of the RWRAPS TC5-S PID Temperature Controller displaying a Fahrenheit temperature setting.
4.1 Controls del panell frontal
- PV Display (Upper): Shows the Process Value (current temperature).
- SV Display (Lower): Shows the Set Value (desired temperature).
- Indicador OUT: Illuminates when the output is active.
- Botó SET: S'utilitza per entrar al mode de configuració de paràmetres i confirmar les seleccions.
- Left Arrow Button (<): Used to shift digits during value adjustment.
- Down Arrow Button (↓): S'utilitza per disminuir valors.
- Up Arrow Button (↑): S'utilitza per augmentar valors.
4.2 Configuració de la temperatura
- Premeu el botó SET el botó una vegada. La pantalla SV començarà a parpellejar.
- Utilitza el <, ↓, i ↑ buttons to adjust the desired temperature (Set Value).
- Premeu el botó SET button again to confirm the new Set Value. The display will stop flashing, and the controller will begin to regulate to the new temperature.
4.3 Configuració avançada dels paràmetres
To access advanced parameters (e.g., PID constants, input type, alarm settings), press and hold the SET button for approximately 3-5 seconds. Navigate through parameters using the SET button and adjust values using the arrow keys. Refer to the detailed parameter list in the full product manual for specific codes and functions.
Figura 5: Davant view of the RWRAPS TC5-S PID Temperature Controller with the display off or in a standby state.
5. Manteniment
The RWRAPS TC5-S controller requires minimal maintenance to ensure long-term reliable operation.
- Neteja: Periodically wipe the front panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspecció: Inspeccioneu regularment les connexions del cablejat per detectar si hi ha fluïdesa o signes de danys.
- Medi ambient: Ensure the operating environment is within the specified temperature and humidity ranges to prevent damage.
No user-serviceable parts are inside the unit. Refer all servicing to qualified personnel.
6. Solució De Problemes
This section provides solutions to common issues encountered with the TC5-S controller.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla/Apagat | Sense subministrament d'alimentació; Cablejat incorrecte; Fusible fundit. | Check power connections (100-240VAC); Verify wiring against diagram; Replace fuse if applicable (by qualified personnel). |
| La pantalla PV mostra "HHHH" o "LLLL" | Sensor open circuit (HHHH) or short circuit (LLLL); Incorrect sensor type setting. | Check sensor wiring and integrity; Ensure input type setting matches the connected sensor (e.g., K-type thermocouple, PT100 RTD). |
| La sortida no s'activa | Incorrect output wiring; Output type mismatch (SSR/Relay); Temperature not reaching setpoint; PID parameters require tuning. | Verify output wiring; Confirm controller output type matches connected device; Adjust setpoint; Tune PID parameters if necessary. |
| Temperature unstable/overshoots | PID parameters not optimally tuned for the system. | Perform auto-tuning or manually adjust PID parameters (P, I, D) according to system response. |
7. Garantia i Suport
For warranty information and technical support, please refer to the documentation provided with your purchase or contact RWRAPS customer service. Keep your purchase receipt as proof of purchase.
Fabricant: RWRAPS
Per obtenir més ajuda, visiteu el RWRAPS store on Amazon.