Producte acabatview
The STIGA Tornado 398 is a powerful and robust ride-on mower designed for efficient lawn maintenance. It features a STIGA ST 450 engine and a 98 cm cutting deck, making it suitable for various terrains.
Característiques clau
- STIGA ST 450 Engine: Powerful 432 cm³ single-cylinder engine for reliable mowing performance, suitable for challenging terrains.
- Hydrostatic Transmission: Provides smooth and comfortable driving with a 98 cm cutting deck.
- Efficient Side Discharge: Rapid and uniform grass dispersion for a clean and effortless result.
- Ajust de l'alçada de tall: 7 positions from 25 to 80 mm to adjust mowing to the desired height.
- Optional Mulching: STIGA Multiclip system for effective mulching and naturally nourished lawn (kit sold separately).
Davant view of the STIGA Tornado 398 ride-on mower, showcasing its yellow and black design.
Muntatge i muntatge
Before operating your STIGA Tornado 398, ensure proper assembly and initial setup. The mower is delivered partially assembled and requires some final steps before use.
Comprovacions inicials
- Assegureu-vos de retirar tots els materials d'embalatge.
- Verifiqueu que hi hagi tots els components que figuren a la llista d'embalatge.
- Add engine oil as required (engine oil is not pre-filled).
- The battery is typically pre-charged, but ensure it is securely connected.
- Refer to the detailed assembly instructions provided in the separate assembly guide for specific steps.
lateral view of the STIGA Tornado 398 ride-on mower, highlighting its compact design and wheels.
Close-up of the comfortable black seat on the STIGA Tornado 398 ride-on mower.
Detallada view of the ergonomic steering wheel of the STIGA Tornado 398.
Davant view of the STIGA Tornado 398, showing the grille and headlights.
Close-up of the robust front bumper of the STIGA Tornado 398, designed for protection.
View of the convenient storage compartment located near the steering wheel on the STIGA Tornado 398.
De dalt a baix view of the STIGA ST 450 engine, located under the hood of the Tornado 398.
Rear fender of the STIGA Tornado 398, featuring a practical cup holder.
Instruccions de funcionament
Follow these guidelines for safe and effective operation of your ride-on mower.
Posada en marxa de la segadora
- Ensure the engine hood is securely closed. The mower will not start if the hood is open.
- Check the fuel level and ensure there is sufficient engine oil.
- Enganxeu el fre d'estacionament.
- Gireu la clau d'encesa a la posició inicial.
- Once the engine starts, release the key.
Sega
- Adjust the cutting height using the lever, choosing from 7 positions between 25 mm and 80 mm.
- Engage the cutting blades.
- Utilize the hydrostatic transmission for smooth speed control and comfortable maneuvering.
- The mower features efficient side discharge for uniform grass dispersion.
- For mulching, ensure the optional STIGA Multiclip kit is installed (sold separately).
Manteniment
Regular maintenance is crucial for the longevity and optimal performance of your STIGA Tornado 398.
Comprovacions rutinàries
- Oli de motor: Check engine oil level before each use and change according to the engine manufacturer's recommendations.
- Plataforma de tall: Clean the underside of the cutting deck after each use to prevent grass buildup.
- Fulles: Inspect cutting blades for sharpness and damage. Sharpen or replace as needed.
- Pressió dels pneumàtics: Maintain recommended tire pressure for optimal traction and even cutting.
- Neteja general: Keep the mower clean from debris, especially around the engine and cooling fins.
Emmagatzematge
For extended periods of non-use, especially during off-season, prepare your mower for storage:
- Netegeu a fons la tallagespa.
- Drain fuel or add a fuel stabilizer.
- Disconnect the battery or use a trickle charger.
- Emmagatzemar en un lloc sec i protegit.
Resolució de problemes
This section provides solutions to common issues you might encounter with your STIGA Tornado 398.
| Problema | Causa possible | Solució |
|---|---|---|
| La segadora no arrenca | Engine hood open, low fuel, dead battery, spark plug issue. | Ensure engine hood is closed. Check fuel level. Check battery connections and charge. Inspect spark plug. |
| Mal rendiment de tall | Fulles esmorteïdes, alçada de tall incorrecta, alçada excessiva de l'herba. | Sharpen or replace blades. Adjust cutting height. Mow tall grass in multiple passes. |
| Tall desigual | Uneven tire pressure, bent blade, debris in cutting deck. | Check and adjust tire pressure. Inspect blades for damage. Clean cutting deck. |
| Vibració excessiva | Bent blade, loose components, engine imbalance. | Inspect blades for damage. Check all bolts and fasteners. If issue persists, consult a service technician. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact authorized STIGA service personnel.
Especificacions tècniques
| Especificació | Valor |
|---|---|
| Dimensions del producte (L x A x A) | 17 x 8 x 94 cm; 157 quilograms |
| Bateria(es) | 1 x 12V (requires batteries) |
| Model de referència | Tornado 398 |
| Alçada | 110 centímetres |
| Longitud | 172.6 centímetres |
| Amplada | 120 centímetres |
| Pes | 165 quilos |
| Tipus de material | Metall, plàstic |
| Exposició solar | ple sol |
| Font d'alimentació | Tèrmica |
| Disponibilitat de peces de recanvi | Informació no disponible sobre peces de recanvi |
| ASIN | B0CV45Y9WQ |
| Marca | Stiga |
| Color | groc |
| Estil | Cilindre |
| Pes de l'article | 157 quilos |
| Amplada de tall | 98 centímetres |
| Nombre de posicions (alçada de tall) | 7 |
| Mode de funcionament | Manual |
Garantia i Suport
STIGA products are manufactured to high-quality standards and are backed by a manufacturer's warranty. Specific warranty terms and conditions may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official STIGA weblloc per obtenir informació detallada.
For technical support, spare parts, or service inquiries, please contact your authorized STIGA dealer or the STIGA customer service department. Ensure you have your product model number (Tornado 398) and serial number ready when contacting support.