NACON CH-675 RGB Gaming Chair User Manual

Introducció

This manual provides essential information for the safe and efficient use of your NACON CH-675 RGB Gaming Chair. Please read these instructions carefully before assembly and operation to ensure proper setup and to maximize your chair's lifespan. Keep this manual for future reference.

Informació de seguretat

• Assegureu-vos que tots els components siguin presents i no estiguin danyats abans de començar el muntatge. No continueu amb el muntatge si hi falta alguna peça o si està danyada.
• Do not exceed the maximum weight capacity of 120 kg (approximately 265 lbs) to prevent damage to the chair and potential injury.
• Mantingueu les peces petites i els materials d'embalatge fora de l'abast dels nens i les mascotes per evitar riscos d'asfíxia.
• Assemble and use the chair on a flat, stable surface to prevent tipping.
• Eviteu estar dret a la cadira o utilitzar-la com a tamboret.
• Do not use harsh chemicals, abrasive cleaners, or sharp objects on the chair's fabric or plastic components.
• Periodically check all bolts and screws for tightness and re-tighten as necessary.

Contingut del paquet

Verify that all the following components are included in your package. If any parts are missing, please contact customer support.

• Respatller
• Base de seients
• Reposabraços (2)
• Cilindre d'elevació de gas
• Base de cinc estrelles
• Rodes de rodes (5)
• Coixí de suport lumbar
• Coixí reposacaps
• Placa de mecanisme
• Side Covers (2)
• Kit de ferramenta (cargols, volanderes, clau Allen)
• Control remot RGB

Image: An exploded diagram showing all individual components of the NACON CH-675 RGB Gaming Chair, including the backrest, seat, armrests, base, wheels, and cushions, along with overall dimensions.

Image: Close-up of the RGB remote control, typically stored in a side pocket of the chair, used to manage the chair's lighting effects.

Muntatge i muntatge

Follow these steps carefully to assemble your gaming chair.

1. Fixeu les rodes giratòries a la base: Insert the five caster wheels into the holes at the end of each leg of the five-star base. Push firmly until they click securely into place.
2. Inseriu l'elevador de gas: Place the gas lift cylinder into the center hole of the five-star base. Ensure it is seated firmly.
3. Fixeu la placa del mecanisme al seient: Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Secure it with the provided screws, ensuring the front of the mechanism faces the front of the seat. Tighten all screws evenly.
4. Fixar els reposabraços al seient: Secure the armrests to the seat base using the provided screws. Do not overtighten initially to allow for minor adjustments, then tighten fully once aligned.
5. Fixar el respatller al seient: Align the backrest with the metal brackets on the seat base. Secure with screws. Ensure a snug fit.
6. Place Seat Assembly onto Gas Lift: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.
7. Attach Side Covers: Once the backrest is securely attached, snap the plastic side covers over the metal brackets to conceal the screws and provide a finished look.
8. Enganxar coixins: Place the headrest cushion and lumbar support cushion onto the chair. The lumbar cushion can be adjusted vertically for optimal comfort.

Imatge: Frontal view of the assembled NACON CH-675 RGB Gaming Chair, showing the five-star base with caster wheels and the seat with cushions.

Imatge: Lateral view of the fully assembled NACON CH-675 RGB Gaming Chair, showcasing its ergonomic design, adjustable armrests, and cushions.

Instruccions de funcionament

Ajust d'alçada

To adjust the chair's height, pull the lever located on the right side of the seat upwards. While holding the lever, apply weight to lower the chair or lift your weight to raise it. Release the lever to lock the height at your desired position.

Ajust de reclinació

To recline the backrest, pull the lever located on the right side of the seat (separate from the height lever) upwards. Lean back to the desired angle and release the lever to lock the position. To return to an upright position, pull the lever and lean forward.

Imatge: Primer pla view of the adjustment levers located under the seat, clearly showing the controls for height and recline functions.

Ajust de reposabraços

The 3D armrests can be adjusted in multiple directions: height, forward/backward, left/right swivel, and inward/outward angle. Use the buttons or levers on the armrests to unlock and adjust to your preferred position, then release to lock.

Imatge: Lateral view of the NACON CH-675 RGB Gaming Chair, highlighting the adjustable armrest mechanism and its range of motion.

Control d'il·luminació RGB

Use the provided RGB remote control to change lighting colors, effects, and brightness. Ensure the chair's RGB system is properly powered on (e.g., via a USB connection to a power source or internal battery, if applicable). Refer to the remote's specific instructions for detailed functions.

Image: The NACON CH-675 RGB Gaming Chair with its side RGB lighting strips illuminated, showcasing various customizable colors and effects.

Manteniment

• Cleaning Fabric Surfaces: Wipe fabric surfaces with a damp cloth and a mild, non-abrasive soap solution. Blot spills immediately. Avoid saturating the fabric.
• Rodes de rodes: Periodically check caster wheels for accumulated hair, dust, or debris. Clean them as needed to ensure smooth and quiet movement.
• Inspecció de maquinari: Regularly inspect all screws, bolts, and connections to ensure they are tight. Re-tighten any loose hardware to maintain stability and safety.
• Ascensor de gas: Do not lubricate the gas lift cylinder. If the gas lift is not functioning correctly, contact customer support for assistance.

Resolució de problemes

La cadira no s'ajusta en alçada.

Ensure the height adjustment lever is fully engaged and pulled upwards. Check if the gas lift cylinder is properly seated in both the five-star base and the seat mechanism. If the issue persists, the gas lift may need replacement.

Chair squeaks.

Check all screws and bolts for tightness, especially where the backrest connects to the seat and the mechanism to the seat. Re-tighten any loose hardware. A small amount of silicone lubricant can be applied to moving metal parts, but avoid the gas lift cylinder.

Les rodes giratòries no giren suaument.

Inspect the wheels for trapped debris such as hair, lint, or carpet fibers and remove them. Ensure all wheels are securely inserted into the five-star base.

La il·luminació RGB no funciona.

Verify that the RGB system is properly connected to a power source (e.g., USB cable). Ensure the remote control has working batteries and is pointed correctly at the chair's RGB receiver. Check for any loose connections.

Especificacions

Imatge: Lateral view of the NACON CH-675 RGB Gaming Chair with key dimensions (height, width, depth) clearly marked for reference.

Garantia i Suport

For detailed warranty information, technical support, or to inquire about replacement parts, please refer to the documentation provided with your original purchase or visit the official NACON weblloc web. Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.