Vox AC10C1CVR
Vox AC10 10W 2-Channel Tube Combo Guitar Ampmés viu
Model: AC10C1CVR - User Manual
1. Introducció
This manual provides essential information for the safe and effective operation of your Vox AC10 10W 2-Channel Tube Combo Guitar Amplifier (Model: AC10C1CVR). Please read this manual thoroughly before using the amplifier to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
The Vox AC10C1CVR is a 10-watt tube combo amplifier featuring a single Top Boost channel and digital spring reverb, housed in a limited-edition Classic Vintage Red tolex finish. It is designed to deliver the iconic Vox tone for guitarists.
2. Informació de seguretat
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not open the amplifier chassis. Refer all servicing to qualified service personnel.
- Font d'alimentació: Assegureu-vos el amplifier is connected to a power supply with the correct voltage as indicated on the unit. Use only the provided AC adapter.
- Ventilació: No bloquegeu cap obertura de ventilació. Assegureu-vos que hi hagi un flux d'aire adequat al voltant de amplifier to prevent overheating. Avoid placing the amplifier on soft surfaces that may block vents.
- Calor: El amplifier's tubes generate significant heat during operation. Do not touch the tubes or areas around them immediately after use. Allow sufficient time for cooling.
- Humitat: Mantenir el amplifier away from water, moisture, and high humidity. Do not operate with wet hands.
- Objectes estrangers: Do not insert any objects into the amplifier's openings.
- cables: Protect power cords from being walked on or pinched. Unplug the amplifier durant les tempestes amb llamps o quan no s'utilitza durant llargs períodes.
- Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
- Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts a l’Estat de Califòrnia per causar càncer i defectes congènits o altres danys reproductius.
3. Contingut del paquet
Carefully unpack your Vox AC10C1CVR amplifier and check that all items listed below are present and in good condition. If any items are missing or damaged, please contact your retailer immediately.
- Vox AC10 10W 2-Channel Tube Combo Guitar Amplifier (AC10C1CVR)
- Adaptador de CA
- Manual d'usuari (aquest document)
4. Producte acabatview
The Vox AC10C1CVR amplifier features a classic design with intuitive controls for shaping your guitar tone.

Figura 4.1: Frontal View of the Vox AC10C1CVR Amplificador. Aquesta imatge mostra el amplifier's front, highlighting its distinctive red tolex covering, the black and gold diamond-patterned fret cloth, and the classic VOX logo in the upper left corner. A sturdy black handle is visible on top.

Figure 4.2: Rear Panel Controls. This image provides a detailed view de la amplifier's rear control panel. From left to right, the controls include: INPUT jack, GAIN knob, BASS knob, TREBLE knob, REVERB knob, VOLUME knob, and the MAINS power switch (OFF/ON). A ventilation grille is visible below the controls, and a handle is mounted centrally.
Controls i característiques:
- ENTRADA: Standard 1/4-inch jack for connecting your guitar.
- GUANY: Adjusts the amount of pre-amp gain, affecting the amplifier's overdrive and distortion characteristics. Higher settings yield more saturation.
- BAIX: Controls the low-frequency response of the amplifier. Turn clockwise to increase bass.
- AGUTS: Controls the high-frequency response of the amplifier. Turn clockwise to increase treble.
- REVERB: Adjusts the level of the built-in digital spring reverb effect.
- VOLUM: Controla el volum de sortida general del ampmés viu.
- MAINS (OFF/ON): Power switch for turning the ampmés viu encès o apagat.
- Top Boost Channel: The AC10 features a single Top Boost channel, known for its bright, articulate tone.
- Digital Spring Reverb: Integrated reverb effect for adding depth and space to your sound.
5. Configuració
- Desembalatge: Traieu amb cura amplifier from its packaging. Retain all packaging materials for future transport or storage.
- Col·locació: Col·loca el amplifier on a stable, level surface. Ensure there is adequate space around the unit for ventilation, especially at the rear where the tubes are located. Avoid placing it near heat sources or in direct sunlight.
- Connexió d'alimentació:
- Ensure the MAINS switch on the amplifier is in the OFF position.
- Connect the supplied AC adapter to the power input jack on the amplifier's rear panel.
- Plug the other end of the AC adapter into a suitable grounded AC power outlet.
- Connexió de guitarra:
- Using a high-quality instrument cable, connect your guitar to the INPUT jack on the amplifier's rear panel.
6. Funcionament
- Encès:
- Before powering on, ensure the VOLUME knob is set to its minimum (counter-clockwise) position.
- Flip the MAINS switch to the ON position. The amplifier will take a few moments to warm up as the tubes reach operating temperature.
- Ajust del to:
- GUANY: Start with the GAIN knob at a low setting. Increase it gradually to achieve desired overdrive or distortion. Lower settings provide cleaner tones.
- BASS & TREBLE: Adjust these tone controls to shape your sound. Experiment with different settings to find the balance that suits your guitar and playing style.
- REVERB: Turn the REVERB knob clockwise to increase the amount of digital spring reverb effect.
- VOLUM: Once your tone is set, slowly increase the VOLUME knob to reach your desired listening level.
- Apagat:
- Turn the VOLUME knob to its minimum position.
- Flip the MAINS switch to the OFF position.
- Desconnecteu el amplifier from the power outlet if it will not be used for an extended period.
7. Manteniment
- Neteja:
- Desconnecteu sempre el fitxer amplifier from the power outlet before cleaning.
- Feu servir un drap suau i sec per netejar les superfícies exteriors.
- Do not use liquid cleaners, abrasive cleaners, or waxes, as they may damage the finish or internal components.
- Cura del tub:
- Vacuum tubes have a finite lifespan and will eventually need replacement. Signs of worn tubes include reduced volume, loss of tone, excessive noise, or inconsistent performance.
- Tube replacement should only be performed by qualified service personnel to avoid electric shock and ensure proper biasing.
- Emmagatzematge:
- Quan no s’utilitzi, emmagatzemeu el fitxer ampGuardar en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- If storing for an extended period, it is recommended to cover the amplificador per protegir-lo de la pols.
8. Solució De Problemes
If you experience issues with your Vox AC10C1CVR amplifier, refer to the following common troubleshooting steps. If the problem persists, contact qualified service personnel.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so |
|
|
| So feble o distorsionat |
|
|
| Brunzit o soroll excessiu |
|
|
9. Especificacions
The following are the technical specifications for the Vox AC10 10W 2-Channel Tube Combo Guitar Amplifier (AC10C1CVR):
- Model: AC10C1CVR
- Potència de sortidatage: 10 watts
- Canals: 1 (Top Boost)
- Reverb: Digital Spring Reverb
- Color: Vin clàssictage Vermell
- Dimensions del producte (P x A x A): 12.2 x 24.4 x 18.9 polzades (30.99 cm x 61.98 cm x 48.01 cm)
- Pes de l'article: 31.4 lliures (14.24 kg)
- Dispositius compatibles: Guitarra
- Fabricant: Vox
- Data de primera disponibilitat: 22 de febrer de 2024

Figura 9.1: Amplifier Dimensions. This image illustrates the physical dimensions of the Vox AC10C1CVR amplifier, showing its height as 18.9 inches, width as 24.4 inches, and depth as 12.2 inches.
10. Garantia i Suport
For detailed warranty information, please refer to the warranty card included with your product or visit the official Vox Amplificació weblloc. Els termes i condicions de la garantia poden variar segons la regió.
If you require technical support, service, or have questions not covered in this manual, please contact Vox customer support through their official website or authorized service centers. Please have your amplifier's model number (AC10C1CVR) and serial number ready when contacting support.
You can visit the official VOX Store for more information: VOX Amplification Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.