Trophy Ridge Propel IMS Limb Driven Archery Arrow Rest (Right Hand)

Introducció

The Trophy Ridge Propel IMS Limb Driven Archery Arrow Rest is designed for reliable and quiet arrow support. This limb-driven rest offers a fully captured design and is compatible with the IMS mounting system for a low-profile setup. It can be configured for activation from either the upper or lower bow limb.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Propel IMS arrow rest to ensure optimal performance and longevity.

Informació de seguretat

Always exercise caution when working with archery equipment. Improper installation or use of an arrow rest can lead to equipment damage or personal injury. Adhere to the following safety guidelines:

• Ensure your bow is de-cocked or unstrung before attempting any installation or adjustment.
• Always wear appropriate eye protection when working on or shooting your bow.
• Comproveu que tots els components estiguin ben subjectats abans d'utilitzar-los.
• If you are unsure about any installation or adjustment step, consult a qualified archery technician.
• Keep fingers and clothing clear of moving parts during operation.

Què hi ha a la caixa

Your Trophy Ridge Propel IMS Limb Driven Archery Arrow Rest package should contain the following items:

• Propel IMS Limb Driven Arrow Rest (Right Hand)
• Maquinari de muntatge
• Limb Activation Cord
• Instruccions d'instal·lació (aquest manual)

Configuració i instal·lació

The Propel IMS arrow rest is designed for straightforward installation without the need for a bow press. Follow these steps carefully:

1. Mounting the Rest

Attach the arrow rest to your bow's riser using the provided mounting hardware. The IMS system allows for a low-profile fit. Ensure the rest is oriented correctly for a right-hand shooter.

Imatge: Frontal view of the Propel IMS arrow rest securely mounted to the bow riser.

Imatge: Lateral view of the Propel IMS arrow rest, showing its low-profile disseny.

2. Attaching the Limb Activation Cord

The Propel IMS can be configured for activation from either the upper or lower limb. Route the limb activation cord from the rest to your chosen limb. Securely attach the cord to the limb according to the specific instructions for your bow model. Ensure there is no slack in the cord when the bow is at rest, but also no excessive tension that could prematurely activate the rest.

Imatge: Part posterior view of the arrow rest, illustrating the path of the limb activation cord.

3. Initial Adjustments (Center Shot and Timing)

Once mounted and the cord is attached, perform initial adjustments for center shot and timing. Center shot ensures the arrow is aligned with the bowstring. Timing involves adjusting the cord length so the rest drops away cleanly and consistently as the bowstring is released.

• Center Shot: Use the horizontal adjustment screws on the rest to align the arrow with the center of your bowstring. A bow square can assist with this.
• Temporització: Draw the bow slowly and observe the rest's movement. The rest should remain in the upright position until just before the arrow leaves the bow, then drop quickly and completely. Adjust the limb cord length as needed to achieve this timing.

Image: An archer preparing to shoot, demonstrating the arrow rest in use.

Operating the Arrow Rest

The Propel IMS is a limb-driven drop-away rest. When you draw your bow, the tension from the limb activation cord pulls the rest into the upright position, supporting the arrow. Upon release, the tension on the cord is relieved, causing the rest to drop rapidly out of the arrow's path, ensuring fletching clearance and consistent arrow flight.

• Place your arrow onto the rest, ensuring it is seated properly.
• Draw your bow smoothly. The rest will rise to support the arrow.
• Aim and release the bowstring. The rest will drop away as the arrow begins to move forward.

Manteniment

Regular maintenance will prolong the life and performance of your arrow rest.

• Neteja: Periodically clean the rest with a soft, damp drap per eliminar la brutícia i els residus. Eviteu els productes químics durs.
• Inspecció: Regularly inspect the limb activation cord for fraying or wear. Replace it if any damage is observed. Check all screws and fasteners for tightness.
• Lubricació: Moving parts may benefit from a small amount of dry lubricant (e.g., graphite powder) if they become stiff, but avoid over-lubrication which can attract dirt.

Resolució de problemes

Aquí teniu solucions a problemes comuns que podeu trobar:

Especificacions

• Nom del model: TR PROPEL IMS LIMB DRIVEN REST RH
• Número de model: ARE302PR
• Número de peça del fabricant: 1501836
• Marca: Trophy Ridge
• Material: Alumini
• Color: Negre
• Orientació de la mà: Mà dreta
• UPC: 754806381657
• Components inclosos: Repòs de fletxa

Garantia i Suport

This Trophy Ridge Propel IMS Limb Driven Archery Arrow Rest comes with a Garantia limitada de per vida. For specific details regarding warranty coverage, claims, or technical support, please refer to the official Trophy Ridge weblloc web o contacteu directament amb el seu departament d'atenció al client.

Per a més ajuda, podeu visitar el Trophy Ridge Store on Amazon or consult the manufacturer's official resources.