deli 4V Cordless Electric Screwdriver

Introducció

Thank you for choosing the deli 4V Cordless Electric Screwdriver. This powerful and versatile tool is designed for various tasks, including light fixtures, home furnishings, electronics, and general repairs. Featuring a 3.6V rechargeable battery with a 1500mAh capacity, USB-C charging, and a high 5 N.m torque, this screwdriver offers efficiency and convenience for everyday use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting. Please read it thoroughly before using the product.

Instruccions de seguretat

Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu eines elèctriques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.

• Mantenir la zona de treball neta: Les zones desordenades conviden lesions.
• Eviteu entorns perillosos: No utilitzeu eines elèctriques a damp o llocs humits, o exposar-los a la pluja. Mantenir la zona de treball ben il·luminada.
• Mantenir els nens allunyats: Tots els visitants s'han de mantenir a una distància segura de la zona de treball.
• Vesteix correctament: Do not wear loose clothing or jewelry. They can be caught in moving parts. Wear non-slip footwear. Wear hair covering to contain long hair.
• Porteu protecció ocular: Feu servir sempre ulleres de seguretat.
• Treball segur: Utilitzeu clamps or a vise to hold work when practical. It's safer than using your hand and frees both hands to operate the tool.
• No sobrepasseu: Mantingueu els peus i l'equilibri adequats en tot moment.
• Mantenir les eines amb cura: Mantingueu les eines afilades i netes per obtenir un rendiment millor i més segur. Seguiu les instruccions per lubricar i canviar els accessoris.
• Eines de desconnexió: Disconnect the tool from the power source before servicing, when changing accessories, or when not in use.
• Evitar l'arrencada accidental: Ensure the switch is in the off position before plugging in.
• Comproveu les peces danyades: Abans d'utilitzar l'eina més, s'ha de revisar acuradament un protector o una altra peça danyada per determinar que funcionarà correctament i complirà la funció prevista.
• Use Correct Accessory: Do not use accessories not specifically designed for this tool.
• Never Force the Tool: Farà la feina millor i més segur al ritme per al qual va ser dissenyat.

Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet. Si falta algun element o hi ha algun malmès, poseu-vos en contacte amb l'atenció al client.

• deli 5 N.m Power Screwdriver (Model EDL-DP04-E3B1)
• 10x S2 Alloy Steel Bits
• 1x 60mm Magnetic Extension Rod
• 1 cable de càrrega USB-A a USB-C
• 1 x manual d'usuari

Image: The deli electric screwdriver shown with its complete set of accessories, including the 10 S2 steel bits, magnetic extension rod, and USB-C charging cable.

Producte acabatview

Familiarize yourself with the components and features of your deli electric screwdriver.

Image: A detailed diagram highlighting the key components of the deli electric screwdriver, including the magnetic chuck, circular LED light, two-way start button, 1500mAh battery, USB-C fast charging port, and its ergonomic design.

• Magnetic Chuck: Securely holds screwdriver bits.
• Llum LED circular: Illuminates the work area, especially useful in narrow or dimly lit spaces.
• Two-Way Start Button: Allows for easy forward and reverse rotation with a single control.
• Bateria de 1500 mAh: High-capacity lithium-ion battery for extended use.
• USB-C Fast Charging Port: Interfície de càrrega convenient i moderna.
• Ergonomic and Minimalist Design: Provides a comfortable and secure grip for safe operation.

Configuració

1. Charging the Screwdriver

Before first use, fully charge the screwdriver's internal battery.

1. Locate the USB-C charging port on the bottom of the screwdriver handle.
2. Connect the provided USB-A to USB-C charging cable to the screwdriver.
3. Plug the USB-A end of the cable into a compatible USB power adapter (not included), computer USB port, or power bank.
4. The charging indicator light (if present, typically near the charging port) will illuminate to show charging status. Refer to the indicator behavior for full charge status.
5. A full charge can power the screwdriver to drive approximately 300 screws.

Image: The deli electric screwdriver being charged via its USB-C port, demonstrating its compatibility with various USB power sources such as laptops, wall adapters, and power banks.

Imatge: Un exemple il·lustratiu view of the screwdriver's internal battery, highlighting its 1500mAh capacity and the capability to drive up to 300 screws per charge.

2. Installing Screwdriver Bits

The screwdriver uses a magnetic chuck for quick and secure bit changes.

1. Select the appropriate S2 alloy steel bit for your task from the included set.
2. Insert the hex end of the bit directly into the magnetic chuck at the front of the screwdriver. The magnetic chuck will hold the bit firmly in place.
3. For hard-to-reach areas, first insert the selected bit into the 60mm magnetic extension rod, then insert the extension rod into the screwdriver's magnetic chuck.
4. To remove a bit, simply pull it straight out from the chuck.

Image: The deli electric screwdriver positioned next to its assortment of S2 steel bits and the extension rod, illustrating the circular LED light at the front.

Instruccions de funcionament

1. Powering On and Direction Control

The screwdriver features an innovative two-way start button for intuitive operation.

• To drive screws (forward rotation), press the "R" (Right/Forward) side of the two-way button.
• To remove screws (reverse rotation), press the "L" (Left/Reverse) side of the two-way button.
• Deixeu anar el botó per aturar el tornavís.

Imatge: Un primer pla view of the screwdriver's yellow two-way start button, clearly marked with 'L' for reverse and 'R' for forward rotation.

2. Ús de la llum LED

The screwdriver is equipped with a circular LED light that automatically illuminates when the screwdriver is in operation.

• The three LEDs form a ring light strip around the chuck, providing clear visibility of your work area.
• This feature is particularly useful when working in dimly lit conditions or in confined spaces.

Image: The deli electric screwdriver with its circular LED light activated, illustrating how it illuminates the work area, especially in tight or dark spots.

Manteniment

• Neteja: Regularly wipe the screwdriver body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the tool.
• Cura de les broques: Keep the S2 steel bits clean and free from debris. Store them in a dry place to prevent rust. Replace worn or damaged bits to ensure optimal performance and prevent damage to screw heads.
• Emmagatzematge de la bateria: If storing the screwdriver for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Avoid storing it in extreme temperatures. Recharge periodically to maintain battery health.
• Inspecció general: Periodically check the screwdriver for any signs of damage, loose parts, or wear. Do not operate a damaged tool.

Resolució de problemes

Especificacions

Garantia i Suport

Per obtenir informació sobre la garantia o assistència tècnica, consulteu la targeta de garantia inclosa amb el producte o poseu-vos en contacte directament amb el fabricant. Conserveu el rebut de compra com a comprovant de compra.

Manufacturer: deli

For further assistance, you may visit the official deli store online: deli Official Store