Pymeter PY-20TH-24 Humidity and Temperature Controller Instruction Manual

1. Introducció

The Pymeter PY-20TH-24 is a versatile digital humidity and temperature controller designed for precise environmental management. This device allows users to control both heating/cooling and humidifying/dehumidifying equipment simultaneously, making it ideal for applications such as mushroom cultivation, greenhouses, reptile enclosures, and other environments requiring stable climate conditions. This manual provides detailed instructions for setup, operation, programming, and maintenance to ensure optimal performance and longevity of your controller.

2. Característiques del producte

• Dual control for both humidity and temperature.
• Independent control for two output relays (OUT1 and OUT2).
• Clear digital display for current and set values.
• Wide measurement and control range.
• Calibration function for temperature and humidity.
• Delay protection for compressor control.

3. Contingut del paquet

• Pymeter PY-20TH-24 Controller Unit
• External Temperature and Humidity Probe
• Manual d'instruccions (aquest document)

4. Dispositiu acabatview

Familiarize yourself with the components of your Pymeter controller.

Figura 4.1: Frontal view of the Pymeter PY-20TH-24 controller, showing the digital display and control buttons (SET, SAV, Up, Down).

Figure 4.2: The two independently controlled power outlets, labeled OUT1 and OUT2, located on the side of the controller.

Figure 4.3: The external probe, which measures both temperature and humidity in the environment.

Figura 4.4: posterior view of the controller, displaying electrical specifications and compliance markings (CE, FCC, RoHS).

5. Instruccions de configuració

1. Desempaquetar el controlador: Carefully remove the Pymeter PY-20TH-24 controller and its accessories from the packaging. Inspect for any damage.
2. Connecteu la sonda: Insert the external temperature and humidity probe into the designated port on the controller. Ensure a secure connection.
3. Position the Probe: Place the probe in the environment where you wish to monitor and control temperature and humidity. Ensure it is not directly exposed to water spray or extreme airflow, which could affect readings.
4. Connexió d'equips: Plug your humidifier or heating device into OUT1. Plug your dehumidifier or cooling device into OUT2. Ensure the equipment's power requirements do not exceed the controller's maximum output (10A Max).
5. Encès: Plug the controller's main power cord into a standard electrical outlet. The display will illuminate, showing current temperature and humidity readings.

6. Instruccions de funcionament

The controller's display shows two main values: PV (Process Value) and SV (Set Value).

• Periodista: Displays the current measured temperature and humidity from the probe.
• SV: Displays the target set temperature and humidity values.

Figure 6.1: The digital display showing current temperature (PV) and humidity (SV) readings.

Funcionament bàsic

Upon powering on, the controller will immediately begin displaying the current temperature and humidity. The OUT1 and OUT2 indicators will light up when their respective outlets are active, based on your programmed settings.

7. Configuració de programació

The controller features several programmable parameters to customize its operation. Use the SET button to enter programming mode, and the Up i Avall arrows to adjust values. Press SAV per desar els canvis i sortir.

7.1. Setting Temperature Parameters

1. Mantén premut SET for 3 seconds to enter the parameter setting menu.
2. Ús Up or Avall to navigate through parameters (e.g., HC, D, CA, PT).
3. Premeu SET again to select a parameter.
4. Ús Up or Avall per ajustar el valor.
5. Premeu SAV to confirm the value and move to the next parameter, or press and hold SAV for 3 seconds to save all changes and exit.

Common Temperature Parameters:

• HC (Heating/Cooling Mode): Set to 'H' for heating control (OUT1 activates when temp is below set point) or 'C' for cooling control (OUT1 activates when temp is above set point).
• D (Temperature Differential): The difference between the set point and the activation point. Prevents rapid cycling.
• CA (Calibratge de temperatura): Adjusts the temperature reading if it deviates from a known accurate thermometer.
• PT (Delay Protection Time): Sets a delay before the output activates, useful for compressors.

7.2. Setting Humidity Parameters

The process for setting humidity parameters is similar to temperature. These settings typically apply to OUT2.

Common Humidity Parameters:

• HC (Humidifying/Dehumidifying Mode): Set to 'H' for humidifying control (OUT2 activates when humidity is below set point) or 'C' for dehumidifying control (OUT2 activates when humidity is above set point).
• D (Humidity Differential): The difference between the set point and the activation point.
• CA (Humidity Calibration): Adjusts the humidity reading if it deviates from a known accurate hygrometer.

8. Calibració

If you suspect the temperature or humidity readings are inaccurate, you can calibrate the sensor. This requires a reliable reference thermometer and hygrometer.

1. Place the controller's probe next to your reference instrument in a stable environment.
2. Allow sufficient time for both readings to stabilize.
3. Enter the parameter setting menu (hold SET durant 3 segons).
4. Navegueu fins a CA (Calibration) parameter for either temperature or humidity.
5. Ajusteu el CA value using the Up or Avall buttons until the controller's reading matches your reference instrument.
6. Save the changes by holding SAV durant 3 segons.

9. Manteniment

• Neteja: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or allow water to enter the unit.
• Cura de la sonda: Keep the probe clean and free from debris. Avoid bending or damaging the probe cable. If the probe becomes wet, allow it to dry completely before use.
• Emmagatzematge: When not in use, store the controller in a dry, cool place away from direct sunlight.

10. Solució De Problemes

• El controlador no s'encén: Ensure the power cord is securely plugged into a live outlet. Check the power source.
• Display shows 'HHH' or 'LLL': This indicates the probe is disconnected, damaged, or the measured value is outside the sensor's range. Check the probe connection and its condition.
• Equipment not turning on/off: Verify that the equipment is correctly plugged into OUT1 or OUT2. Check the programmed temperature/humidity set points and differentials. Ensure the controller is in the correct heating/cooling or humidifying/dehumidifying mode.
• Lectures inexactes: Perform a calibration as described in Section 8. Ensure the probe is placed correctly and not affected by external factors.
• Difficulty programming: Refer to Section 7 and follow the steps carefully. Practice navigating the menu to become familiar with the button functions.

11. Especificacions

12. Informació de seguretat

• Do not operate the controller with wet hands or in excessively damp condicions.
• Ensure all connected equipment is within the specified current limits of the controller.
• Do not disassemble or modify the controller. Refer all servicing to qualified personnel.
• Mantingueu el dispositiu fora de l'abast dels nens.
• Always unplug the controller from the power outlet before performing any maintenance or connecting/disconnecting equipment.

13. Vídeos de productes

Watch these official videos for additional guidance on using your Pymeter controller.

14. Garantia i Suport

Pymeter products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Pymeter website. For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact Pymeter customer service through their official channels.