Introducció
The CORSAIR RS120 MAX PWM Thick Fans are engineered to maximize cooling performance in high-performance systems. Featuring a 30mm thick design, Liquid Crystal Polymer construction, and CORSAIR AirGuide Technology, these fans deliver high static pressure and efficient airflow with quiet operation. This manual provides essential information for the proper installation, operation, and maintenance of your RS120 MAX fans.
Image: CORSAIR RS120 MAX 120mm PWM Thick Fans, triple pack, with included mounting screws.
Configuració
Follow these steps for proper installation of your CORSAIR RS120 MAX fans:
- Preparació de la ubicació de muntatge: Identify the desired mounting location in your PC case or on a radiator. Ensure sufficient clearance for the 30mm thick fan.
- Secure Fans: Use the provided mounting screws to firmly attach the fans to your case or radiator. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
- Connectar l'alimentació: Connect the 4-pin PWM connector from each fan to an available 4-pin fan header on your motherboard or fan controller.
- Gestió de cables: Route cables neatly to avoid interference with other components and to maintain good airflow within the case.
Image: CORSAIR RS120 MAX fans installed within a computer case, demonstrating typical placement for cooling.
En funcionament
The CORSAIR RS120 MAX fans are designed for optimal performance and quiet operation:
- Control PWM: The 4-pin PWM header allows for precise control of fan speeds, ranging up to 2,000 RPM. This enables dynamic adjustment of airflow based on system temperature, balancing cooling and noise levels.
- High Static Pressure: With an increased thickness of 30mm, these fans generate a high static pressure of 4.2mm-H2O. This makes them ideal for pushing air through restrictive environments such as high-density radiators.
- Flux d'aire: The fans deliver up to 72 CFM of airflow, ensuring efficient heat dissipation from your components.
- CORSAIR AirGuide Technology: Anti-vortex vanes concentrate airflow directly at your hottest components, providing targeted and effective cooling.
- Magnetic Dome Bearing: This advanced bearing design minimizes friction and mechanical noise, contributing to quiet operation and extended fan longevity.
Image: Visual representation of high static pressure, highlighting the fan's capability to push air through obstructions.
Imatge: Detallada view of CORSAIR AirGuide Technology, showing the anti-vortex vanes.
Image: Cross-section diagram of the Magnetic Dome bearing, emphasizing quiet operation.
Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil dels ventiladors:
- Eliminació de pols: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Inspeccionar connexions: Occasionally check that all 4-pin PWM connections are secure.
- Evitar la lubricació: The Magnetic Dome bearing is self-lubricating and does not require additional oil or grease.
Resolució de problemes
If you encounter issues with your CORSAIR RS120 MAX fans, consider the following:
- El ventilador no gira:
- Check if the 4-pin PWM cable is securely connected to the motherboard or fan controller.
- Verify that the fan header on the motherboard is enabled in the BIOS/UEFI settings.
- Ensure the power supply is providing adequate power to the system.
- Soroll excessiu:
- Check for any cables or obstructions interfering with the fan blades.
- Ensure the fan is securely mounted and not vibrating against the case or radiator.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or fan control software to a lower RPM.
- Rendiment de refrigeració deficient:
- Verify correct fan orientation for optimal airflow (e.g., intake for fresh air, exhaust for hot air).
- Clean any dust buildup on the fan blades or radiator fins.
- Ensure there are no obstructions blocking airflow paths within the case.
Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 4.72" de llargada x 4.72" d'amplada x 1.18" d'alçada (120 mm x 120 mm x 30 mm) |
| Marca | Corsari |
| Tipus de connector d'alimentació | PWM de 4 pins |
| Voltage | 12 Volts |
| Wattage | 3 watts |
| Mètode de refrigeració | Ventilador |
| Dispositius compatibles | Escriptori |
| Nivell de soroll | 29.5 decibels (màxim) |
| Material | Liquid Crystal Polymer (LCP) |
| Velocitat de rotació màxima | 2000 RPM |
| Capacitat de cabal d'aire | 72 peus cúbics per minut (CFM) |
| Pressió estàtica | 4.2 mm-H2O |
| Número de model | CO-9050171-WW |
Image: Comparison illustrating the 30mm thickness of the RS MAX fan compared to a standard 25mm fan.
Image: Close-up of the fan blades, highlighting the Liquid Crystal Polymer construction.
Garantia
Aquest producte està cobert per a 5 anys de garantia del fabricantSi us plau, conserveu el comprovant de compra per a reclamacions de garantia.
Suport
For further assistance, technical support, or to explore other CORSAIR products, please visit the official Corsair weblloc web o la seva botiga d'Amazon:
- Visit the Corsair Store on Amazon
- Refer to the official Corsair website for detailed product information and support resources.